Gergaji panel dengan pemuatan otomatis

SCHELLING FH6 430

Kondisi: sangat baik (bekas), Horizontal panel saw with rear lift table Control system: MCS Evolution Software Powered roller conveyors (approx. 5400 x 2200 mm) - OPTIONAL Lift table (mm): 4420 x 2200 No. 2 Rear pushers (1 with grippers) No. 9 Grippers Max. cutting width (mm): 4300 Useful stroke of the pusher (mm): 4300 Max. saw blade projection (mm): 135 Rjdpep N D Atjfx Ad Rsr Max. gripper opening (mm): 125 Scoring saw (Max. blade diameter) mm 20 / 1.9 kW Main saw (Max. blade diameter / power) mm 480 / 27 kW Adjustable saw carriage feed rate (m/min): 6 - 150 No. 4 Front air cushion tables Total connected load (kW): approx. 36

Kondisi: bekas, Nikmann FS 41N mesin planer dan thicknesser - lebar penyerutan 41 cm - poros dengan 4 pisau - 2 rol meja - motor dengan rem Rodpfx Adeya Drvs Rsr Mesin dalam kondisi sangat baik, luar biasa.

Kondisi: sangat baik (bekas), Panel saw with rear lift table Control: MCS Evolution 2.0 with SP2 software on Windows XP Redpfx Adsilluks Ror Lift table (mm): 2200 x 4250 Program pusher: Divides Grippers: 7 Maximum cutting width (mm): 4250 Maximum saw blade projection (mm): 135 Maximum gripper opening (mm): 125 Scoring saw (max. saw diameter 200 mm) Main saw (max. saw diameter 460 mm / power 21 kW / 28 HP) Adjustable saw carriage feed (m/min): 6 – 150 Front air cushion tables (qty): 3 Total connected load (kW): approx. 43 OPTIONAL: Optimization software: HPO

Kondisi: sangat baik (bekas), Horizontal panel saw with rear lifting table Rjdpfxjq Rffio Ad Rsr Control: MCS Evolution Software included Lifting table dimensions (mm): 4300 x 2200 No. of rear pushers: 2 (1 with grippers) No. of grippers: 8 Max. cutting width (mm): 4200 Useful stroke of pusher (mm): 4200 Max. saw blade projection (mm): 135 Max. gripper opening (mm): 125 Scoring saw (max. saw diameter): 20 mm Main saw (max. saw diameter/power): 460 mm / 21 kW Adjustable saw carriage feed (m/min): 6 - 150 No. of front air flotation tables with 90° rotation device: 1 (2100 x 4100 mm) Total connected load (kW): approx. 36

Kondisi: bekas, Tahun pembuatan: 2002, Turning diameter: 820 mm Turning length: 2,000 mm Control: SIN 810 D Centre height over flat bed: 400 mm Swing diameter over cross slide: 500 mm X-axis travel: 540 mm Z-axis travel: 2,100 mm Feed rate X/Z-axis: 0.01 - 50 mm/min Rapid traverse X-axis: 5.00 m/min Rapid traverse Z-axis: 10.00 m/min Feed force, facing: 12,500 N Feed force, longitudinal: 20,000 N Spindle speeds: 6.4 - 1,600 rpm Rjdjw Dvipopfx Ad Rsr Spindle speed, gear stage 1: 6.40 - 376 rpm Spindle speed, gear stage 2: 27.40 - 1,600 rpm Drive power at 60% / 100% duty cycle: 46.00 / 37.00 kW Torque at 60% / 100% duty cycle: 5,073 / 4,069 Nm Constant cutting speed: 1 - 9,999 m/min Spindle nose according to DIN 55027 - Size 11 Spindle diameter at front bearing: 170 mm Spindle bore: 128 mm Tailstock quill taper: MK 6 Quill diameter: 125 mm Quill stroke: 280 mm Thread pitch: 0.1 - 400 mm Total power requirement: 35.00 kW Machine weight: approx. 11.00 t Space requirements: approx. 6.00 x 3.00 x H2.60 m Equipment: SIEMENS Sinumerik 810D control, chip conveyor, tailstock, extraction unit, 2 steadies included. Spindle bearings overhauled by OEM 04/2023 Machine can be inspected under power.

Kondisi: sangat baik (bekas), Horizontal panel dividing saw with rear lift table Control: MCS Evolution Software included Powered roller conveyors (approx. 4500 x 2200 mm) Lift table (4300 x 2200 mm) Rjdpfx Ajq Rfahsd Ror Panel rotation device (for 90° rotation) No. 2 rear pushers (1 with clamping grippers) Program pusher division No. 10 clamping grippers Max. cutting width (mm): 4300 Useful stroke of pusher (mm): 4300 Max. saw blade projection (mm): 135 Max. gripper opening width (mm): 133 Scoring saw (max. blade diameter) mm: 20 Main saw (max. blade diameter / power) mm: 460 - kW: 27 Adjustable saw carriage feed rate (m/min): 0 - 150 No. 4 front air cushion tables Total connected load (kW): approx. 36

Kondisi: sangat baik (bekas), Horizontal panel dividing saw with rear lift table Control: MCS Evolution Software: SIEMENS WinAC RTX Rsdpfx Aot Ah Nijd Rjr Powered roller conveyors (approx. 5600 x 2200 mm) + upstream storage Lift table (mm): 4300 x 2200 Panel rotation device (for panels) up to 90° No. 2 Rear pushers (1 with grippers) Programmable pusher unit - DUPLUS2 No. 12 grippers Max. cutting width (mm): 4300 Useful stroke of the pusher (mm): 4300 Max. saw blade projection (mm): 145 Max. gripper opening (mm): 150 Scoring saw (max. blade diameter): 200 mm Main saw (max. blade diameter/power): 480 mm / 27 kW Adjustable saw carriage feed (m/min): 6 – 150 No. 4 Front air cushion tables Total connected load (kW): approx. 42 OPTIONAL: Optimization software: HPO

Kondisi: sangat baik (bekas), sliding table saw Robland 3200 Silver Line scoring unit with separate motor, carriage length: 320 cm main motor: 7 kW 3 spindle speeds max. blade diameter: 450 mm Redsv S Hy Aepfx Ad Ror blade tilt: 0–45° electrically adjustable with digital readout blade height adjustment: electric, without readout rip fence on the right, motorized adjustment up to 1240 mm digital readouts for the fence on the carriage angle cutting device included Brand-name machine in very good condition,

Kondisi: sangat baik (bekas), O04024) AUTOMATIC SHEET STORAGE SYSTEM for PANELS – SIRIO Total space requirement (incl. panel saw): approx. 10,000 mm x 47,000 mm Movable upper gantry (on the X-axis) with movable carriage (on the Y-axis) and associated vacuum suction unit (movable on the Z-axis) Max. speed of movable upper gantry (X-axis): approx. 150 m/min Carriage travel speed (Y-axis): approx. 150 m/min Vacuum suction unit travel speed (Z-axis): approx. 60 m/min Vacuum suction unit assembly, rotatable by 90° Automated management system (via scanner) for cut panels (even if they remain in storage) Redpfewrz Dbex Ad Rer O04025) PANEL SAW with rear lift table, Model FH6 430 MCS Evolution control. SIEMENS WinAC RTX software No. 1 rear pusher Programmable split pusher – DUPLUS2. No. 12 clamps Max. cutting length (mm): 4300. Usable pusher stroke (mm): 4300. Max. saw blade projection (mm): 135 Scoring saw (max. blade diameter): 200 mm Main saw (max. blade diameter / power): 460 mm / 21 kW Adjustable feed speed of the saw carriage (m/min): 1 – 150 No. 4 front air flotation tables Total connected load (kW): approx. 33

Kondisi: baik (bekas), Tahun pembuatan: 2011, nomor mesin/kendaraan: 2212.287, de Redpfx Ajtk It Sod Rsr

Kondisi: baru, Tahun pembuatan: 2026, CORMAK C2141 ATC PREMIUM (2100 x 4200 mm) is a dynamic and precise CNC router based on components from global manufacturers, suitable for the heaviest tasks, and ideal for industrial-scale production. Consistent quality control and the use of high-grade components in the machine's construction ensure top-quality machining of materials such as wood, wood-based panels, MDF, OSB, PVC, HPL, plywood, plexiglass, dibond, carbon, and alucobond. Machine Description 1. Work Table - Sectional table with four independent vacuum sections, manufactured from rigid and durable HPL boards - Each section includes ports that deliver vacuum from the vacuum pump via a piping system - Main ports in the vacuum table feature covers, allowing for the clamping of various material sizes 2. HQD Spindle - Brushless spindle from a renowned manufacturer, 9 kW power, powered by an inverter and equipped with overload protection - Milling Electrospindle fitted with an innovative AIR cooling system 3. Drive - Energy-efficient, high-class 1500W Leadshine Servo Drives with a high holding torque (double on Y axis), controlled by the NK-105 G3 digital controller, providing excellent machining quality while maintaining high processing speeds in all axes - Brushless servo motors drive X and Y axes via high-quality planetary gearboxes - The Z axis, where positioning precision is crucial, is driven by a reinforced ball screw - Gantry movement along X and Y axes is achieved via HIWIN linear guides and helical gear racks, ensuring years of trouble-free operation, manufactured from hardened and tempered high-quality steel 4. Construction - The gantry frame is made from cast iron, offering exceptional rigidity and outstanding vibration dampening during operation 5. Tool Magazine (8 positions) & Tool Measurement Sensor Rodpjvupu Uefx Ad Rjr - Machine features an 8-position linear tool magazine, ISO30 cone set, and ER32 collets - Included tool holders: ISO30 and collets for tool sizes: 1/2" - 6 pcs; 1/8" - 2 pcs; 3-4mm - 2 pcs; 5-6mm - 4 pcs; 7-8mm - 2 pcs; 9-10mm - 2 pcs 6. Vacuum Pump and Dust Extraction Shoe (Optional) - Pneumatically operated dust extraction shoe, mounted by the spindle, allows easy connection to any chip extraction system, ensuring a clean work environment, safety, and precision 7. Control Software (Industrial Grade) - NK-105 G3 controller - Compatible with the latest CAD/CAM software - OPTIONAL: Latest UCanCAM V12 software Technical Specifications Working Area: 2100 x 4200 mm Z Axis: 300 mm Construction: Arm - cast iron / table - welded steel Drives: Leadshine Servo Drives 1500W Table: T-slot / Hybrid Spindle Power: 9 kW Spindle: HQD air-cooled (optional oil mist) Spindle Speed: 6,000 – 24,000 rpm Power Supply: 400 V, compressed air min. 8 bar Re-positioning accuracy: 0.01 mm Linear Bearings: Profiled rails with Hiwin carriages Material Hold-down: Vacuum, hybrid Vacuum Pump: 2 x 7.5 kW (optional) Software: UCanCAM V12 (optional) Dimensions: 5070 x 2870 x 1900 mm Weight: 3350 kg