Federautomat

SCHENKER FA-20 S

Kondisi: baik (bekas), TECHNICAL DATA AXES Rapid traverse X,Y: 15,000 mm/min Rapid traverse A,B: 15,000 mm/min Rapid traverse Z1,Z2,E: 18,000 mm/min Rapid traverse C: 90,000°/min Minimum input increment: 0.001 mm Minimum input increment, C-axis: 0.001° MACHINING CAPACITY Max. turning diameter: 20 mm Max. spindle stroke: 205 mm Max. drilling capacity: Static: 14 mm; Driven: 8 mm Max. tapping capacity: Static: M10 x P1.5; Driven: M6 x P1.0 MAIN SPINDLE Spindle speed: 500 – 10,000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm SUB SPINDLE Max. clamping diameter: 20 mm Max. part length for ejection forward: 150 mm Max. unclamping length: 75 mm Spindle speed: 500 – 10,000 rpm Sub spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operating mode: Right-handed Dimensions: 2,700 x 1,400 x 2,400 mm Weight: 3,400 kg SCOPE OF SUPPLY Guedpfju Uic Tex Agrec Includes (not an exhaustive list): Control: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic power unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply as per photo documentation We assume no liability for the correctness, completeness, or current validity of the information provided.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, An aluminium die-casting machine is available. Clamping force: 2,200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking: toggle system, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm/70 mm, shot chamber fill volume min./max.: 293 cm³/898 cm³, casting pressure: 1,990 bar, projected area min./max.: 110 cm²/338 cm², performance: 780 cycles/h. Platen dimensions X/Y: 755 mm/755 mm, tie bar spacing: 500 mm/500 mm, mold height min./max.: 250 mm/600 mm, min. mold dimensions X/Y: 296 mm/296 mm. Includes crucible furnace, air blow-off unit, dosing unit, and 4x control cabinets. Documentation available. Godpfx Asucfwpogrjuc

Kondisi: baru, As well as other types, as a package. Guedpfjf Ddzqsx Agrec

Kondisi: baru, es Gusdody Hm Depfx Agrsc

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) Gujdpfx Agjh Ek Daorsc - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1967, Equipment: 1 right-side gripper feed 1 eccentric press 90 kN 2 narrow, narrow-slide units 3 standard slide units Working Range: Wire thickness range: 0.5 – 3.5 mm Strip width: up to 32 mm Gsdpfjpq H Upjx Agrouc Feed length: up to 170 mm Capacity: up to 250 cycles/min.

Kondisi: baru, Tahun pembuatan: 2020, en Gedpfxjiu Smbo Agreuc

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Krauss Maffei KM 250-900B Clamping force: 250 t Year of manufacture: 1987 Injection weight: 470 g Guedpofp U Hvsfx Agrsc Tie bar spacing: 630 x 560 mm

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, Gergaji Graule ZS 170, tahun 1996, 2000 EUR Mesin frais Graule 6/250 - 160, tahun 2008, 2700 EUR Rak lemari putar untuk daun dan bingkai, 500 EUR Gsdpfowp Stzjx Agrsuc Roller conveyor sepanjang 7,5 m digunakan sebagai rak penyimpan jendela di depan stasiun pemasangan kaca, 600 EUR

Kondisi: baru, Tahun pembuatan: 2024, 1 Godpfjxraucox Agrsuc