Pusat pemotongan dan permesinan

Schirmer BAZ 1000-G2/VU SBZ inkl. SZA450

Schirmer cutting and processing center type BAZ 1000-G2/VU incl. steel cutting automatic SZA450
Bar Processing Center Type SBZ
- Cutting and processing center – operating direction from right to left
- Automatic entry magazine for manual loading of 12 profiles, max. profile length 6500mm, automatic transfer station into the shuttle conveyor of the gripper
- Feed unit for PVC profiles with an NC-positioned gripper, driven by a highly dynamic linear servo motor
- Automatically adjustable profile guides for various support contours in the profiles
- Processing station designed as a G-module, with 3 servo axes incl. clamping elements and integrated into the control system. The station is equipped with high-frequency electric motors for the following machining operations on the PVC profile:
o Drainage and ventilation slots – drilling in frames, sashes, mullions, transoms, and glazing bars
o Lock case milling on window sashes, front door, and side door sashes
o Marking holes for mullions, transoms, and connectors screwed from the inside
Hfodpfx Adewkq Rbjqon
o PZ and handle cut-outs on the HAT sash
o Door plate fixing holes
o Hinge pin holes 2x6mm / 3x2.5mm
- Complete VU saw cut with double saw unit 2x45° for simultaneous cutting of mitre and scrap as well as notching cut for transoms to be welded in. Saw feed with servo axis via linear servo motor and height adjustment with servo axis via ball screw spindle.
- Gasket tensioner above the VU saw
- Conveyor belt for removal of PVC waste from the VU saw machinery area
- Complete saw unit in standard design with 1 saw unit for mitre and scrap cuts, infinitely variable NC-controlled swivel drive, swivel range +45° to -45° for saw blade diameter 550mm, saw motor with 2.5kw output
- Horizontal circulating buffer for cycle-independent transport of profiles from the BAZ to the steel inserting station as well as to the screwing station and the SBZ
- Steel inserting station for manual insertion of steel reinforcements with 12 feeding slots
The 1st and 2nd steel feed slots are equipped with clamps for holding the PVC profiles during manual reinforcement
- Monitor as a steel length display for the steel feed including control interface. 8 steel positions are displayed
- Screwing station for the horizontal circulating buffer, operating from above and below with frequency-controlled electric screwing unit
- Additional screwing station with automatic screw feeder
- Drilling station as a steel module, with 2 servo axes for drilling movement and horizontal adjustment
- Automatic label printer with dispensing device. The labels are manually applied to the profiles
- PC machine controller / control cabinet PC C6140-0010 (TwinCat) casing
Schirmer steel cutting automatic type SZA 450
- Automatic entry magazine for up to 12 steel profiles, max. length 6000mm
- Saw unit for 90° cut, saw blade diameter 450mm
- Saw motor 3kw, saw feed via servo drive with pneumatic control
- Automatic bar infeed and outfeed
- Max. cutting length 4000mm
- Steel scrap management (steel length measurement in the steel loading magazine via 11 light barriers)
- Display/indication system
The operator is supported by the display in selecting the steel profiles to be loaded
- Belt conveyor for transverse transfer and removal of the processed profiles

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.