Mesin roll forming

Schlebach Mini Prof Plus

Kondisi: bekas, Hydraulic Workshop Press, Broaching Press, Keyway Broaching Press Hydraulic Workshop Press, Custom-Built MaVo Type 5t-20 Previously used for broaching keyways in through-holes. Pressing force: 5 tons (at 100 bar hydraulic pressure) Frame opening: 770 mm Cylinder stroke: 220 mm Distance from piston rod thread to table traverse: max. 900 mm Pressing speed, ram downwards: approx. 11.5 mm/sec = 220 mm in 19 sec. Pressing speed, ram upwards: approx. 24.5 mm/sec = 220 mm in 9 sec. Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Two-hand operation (2 buttons for downstroke, 1 button for upstroke) - Hydraulic pump: HAWE, Type K5/3 (can also deliver 400 bar, but the pump is extremely loud at this pressure) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension approx. 290 mm for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension approx. 250 mm for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, lengths 110 mm and 130 mm - 2 support plates Kwedpfx Aowki Apoglot - Very robust steel construction made from 140 double T-beams - Estimated load capacity of the steel frame: likely 40 tons or more - Can be moved with a pallet truck Space requirements (L x W x H): 1200 x 930 x 2280 mm Weight: 485 kg

Kondisi: baru, Tahun pembuatan: 2024, Consisting of a bale breaker for large bales, type MHB, and straw shredder type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (Approx. 15 weeks production time) Suitable for round or square bales. Including frequency inverter (controls the speed of the scraper floor). Kwsdpfxjb Nulhs Aglet The bales are placed on the scraper floor and the cutter head feed is switched on. The cutter head tines tear the straw from the bale and throw it into the hopper. Ideally, this machine is combined with a straw shredder. Technical data for bale breaker: Capacity: 1–2 bales per hour Up to a maximum of 600 kg per hour (depending on the installed sieve size in the straw mill, kW rating of the straw mill). Without a straw mill, the bale breaker can process up to 900 kg/hr of straw. Maximum square bale size: 2400 x 1200 x 800 mm (LxWxH) Cutter head motor: 5.5 kW, 380 V Scraper floor feed: 0.75 kW, 380 V Dimensions: 3750 x 1730 x 2460 mm (LxWxH) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for the larger straw shredder (18.5 kW): +€3,940 net Technical data, MHZ with special feed hopper: Motor: 15 kW, 380 V electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts Selectable perforation (10, 12, 15) 22, 30, 45 mm With star-delta switch, overload protection, and 8 m power cable, ready to plug in Discharge spout: 160 mm Blowing distance: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (LxWxH) Weight: approx. 240 kg --- Options at extra cost: Feed auger: +€970 net Cyclone (suspension by customer) *should be no more than 10 m away +€2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional rotary valve (renders material pressureless) +€5,750 net Control system: from €1,620 net Special bale breaker extension 3m (other dimensions upon request) +€9,750 net Briquetting press MPP 180 S; little-used demonstration unit 70 mm briquette – up to max. 100 kg/hr from €39,700 net * Larger machines available on request --- Description: muetek bale breaker was developed for processing round and square bales of hay and straw. The attached shredder processes straw from all types of cereal crops, hay, corn, and miscanthus. muetek machines from the MHZ/MHB series are characterized by their robust design and heavy-duty construction. muetek bale breakers of the MHB series are equipped with a chain conveyor onto which the bale is placed using a front loader. The support is adjustable depending on the type of bale. The chain conveyor pushes the bale against the cutter rotor; the feed speed is adjustable. The cutter rotor is fitted with multiple teeth which rip open the straw bale. The separated straw is then discharged. --- The machines are generally designed for dry materials: - Straw - Hay --- Processing hemp bales is only possible with a special bale breaker Surcharge approx. €9,720 net (depending on configuration) Straw mills are not suitable for processing hemp. Material requirements: Maximum moisture content: 12%

Kondisi: baru, Tahun pembuatan: 2025, New machines directly from a proven and experienced manufacturer. No risk! We offer you a wide selection of sheet metal bending machines and guillotine shears. What you can expect from us: speedy and secure delivery without complications; expert advice and service during the warranty period and beyond. Guaranteed. Consultation, delivery, or maintenance? Always a pleasure. For individual machines or complete packages? No problem. We know all our equipment inside and out. For years. And as the manufacturer, we are always up to date. We look forward to hearing from you. Folding Bench RED-2200/0.8 incl. transport wheels Bending machine folding bench with lateral cutouts for top-to-bottom bending. Thanks to this feature, you can finish your window sills. The machine’s design allows for a 6 cm clearance above and below for forming workpieces. This is a modern sheet metal bending machine capable of bending from three sides. Technical specifications: - Maximum working width: 2080 mm - Bending capacity: up to 0.8 mm (steel sheet) - All non-ferrous metals: 30% higher bending capacity - Bending angle: max. 145 degrees - Bending beam thickness: 15 mm - Upper beam can be raised in three positions - Upper beam stroke: 80 mm - Degree scale - Angle stop - Rear rack for material support - Front gauge stops - Weight: approx. 250 kg Roller shear (max. cutting capacity 0.8 mm/steel) available for an additional 350 euros - Manual seam closer available for an additional 75 euros Kwjdeg In Azspfx Aglst The machine complies with CE guidelines and comes with a 12-month warranty. Delivery costs: 180 euros Price: 2200 euros Delivery time: every week Cash payment upon delivery We look forward to your inquiry! Invoices are issued with 0% VAT as intra-community delivery, or with 19% VAT applied.

Kondisi: bekas, de-to-en-01 Kodpfx Aow E Hz Esglswt

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Price when purchasing a powder coating system – negotiable!! • Electrical data 100-240V 50-60Hz • Powder output up to 200g / min • Air consumption up to 250L / min at 6 bar • Air quality / moisture less than 1.3 g / nm3 • Air quality / oil less than 0.1 mg / nm3 Powder Coating Gun Data • Output voltage 100 kV • Max. output current 100 µA • Hose length 6 m – antistatic hose • Polarization Negative • Compliance ATEX 2mJ Description • Manual coater for quick color changes directly from the box • Intuitive 7" touch display • Automatic cleaning function – gun rinsing • Up to 20 user-defined programs • 3 automatic programs • Remote control of powder feed and program change from the handle -- Equipment • PSS series controller • ProfiJector RI-1 blunt powder injector • ProfiGun powder gun with quick coupling and remote control • Hose set • Stand with vibrator and extraction unit with fluidization PSS Controller • 7-inch touch panel operable with gloves • 3 automatic programs (overcoating, difficult-to-reach areas, flat surfaces) • Graduation in 0.1kV and 0.1uA increments • Advanced pneumatic valves for precise air dosage control (romer – patent pending) • Real air flow measurement responds to errors such as pressure loss or system clogging • Advanced diagnostic tools • Capability to name programs • Option to control external master controllers via ModBus protocol (A series) ProfiGun PM-1 Gun • Lightweight, ergonomic gun, perfectly balanced with a contoured handle • The ceramic cascade with up to 100,000V efficiently charges all types of powders • New nozzle generation ensures perfect powder penetration into complex shapes • Profiled nut enables a good grip • The conductive, high-carbon handle provides excellent grounding for the operator • Spray gun made from high-impact resistant special materials • Fully disassemblable design with interchangeable powder pathway tube • Spray gun is patented in the USA and EU • Cascade polarity – negative Kodpeg U I Ugsfx Aglswt ProfiJector Powder Coating Pump Description • Design of a new efficient injector • Most effective feed angle proven by research • Saves powder and air compared to right-angle injectors • Offers comparatively low operating costs versus other pumps • Injector is protected by a European patent

Kondisi: bekas, 4,000 running meters of structural profiles, C-shape, galvanized Used, in good condition, see photos Length per piece approx. 12 m Profile size: 110 x 90 mm Material thickness: approx. 3 mm Negotiable price: € 4.90 per running meter, net ex stock Goods in stock. Transport and assembly available upon request. Viewing possible at any time by appointment. Further information available on request. Kwedpfxjur Ikre Aglst We always have over 5,000 running meters of pallet racking from various manufacturers in stock. Modifications and errors in technical data, descriptions, and prices as well as prior sale reserved! Please see our Terms and Conditions, all prices excl. VAT ex stock.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: P1.2014.86242, The subject of the report is a Dreistern laser-welded profile production line. Kwjdpfx Agjxz Tuuelet The machine has been tested but not introduced into production. It has operated for 50 hours in total. It is designed for forming cold-rolled open or closed profiles, which are laser-welded. The input material for profile production is steel strip—either black or galvanized. Component parts (serial numbers as per technical documentation): 1. Decoiler Soprem H1250/D/1700ZR, serial no.: 20140388/1, year of manufacture: 2014 2. Strip end welding machine Soprem CH-2540, serial no.: 20140388/2, year of manufacture: 2014 3. Multi-roller forming machine Dreistern RS616, serial no.: 15773, year of manufacture: 2015  - Base frame, serial no.: not available, year of manufacture: not available  - Gear unit assembly P60/80/90, serial no.: not available, year of manufacture: not available  - Drive with servomotor, serial no.: not available, year of manufacture: not available  - Stands: profiling, embossing, and perforating units Dreistern P60, serial no.: not available, year of manufacture: not available  3 x roll forming tool Dreistern RC1500, RC1501, RC1502, serial no.: not available, year of manufacture: not available 4. Laser Trumpf TruLaser Cell 1100, serial no.: S1200C0090, year of manufacture: 2014 5. Cutting machine Dreistern TS214.10, serial no.: 15122, year of manufacture: 2015  - Circular saw for cutting Dreistern S 200.10, serial no.: 15094, year of manufacture: 2014 6. Electrical cabinets 7. Laser safety system

Kondisi: bekas, Rolling bearings, ball bearings, SKF bearings, SKF, spherical bearings, roller bearings -Type: 24056 CC/W33 -Lubrication groove -Bore: Ø 280 mm -Outer diameter: 420 mm -Width: 140 mm Kwsdpsd Nw H Aefx Agljt -Weight: 74 kg

Kondisi: baru, Tahun pembuatan: 2025, Punctual delivery, reliable equipment! Folding machine from the only proven manufacturer: PROD MASZ® Ultra-precise folding machine for steel, copper, zinc, and aluminium sheets. These folding machines and all standard spare parts are available directly from stock. Folding Machine RED-2200/0.8 incl. transport wheels Bending machine / folding press with side cut-outs for bending from top to bottom. With this feature, you can easily produce window sills. The design of the machine provides a 6 cm gap, both above and below, for forming operations. This is a modern sheet metal bending machine capable of bending on three sides. Ksdpfxjcv S Dto Agljwt Technical Specifications: - Maximum working width: 2080 mm - Bending capacity: up to 0.8 mm (steel sheet) - All non-ferrous metals: 30% higher bending capacity - Bending angle: max. 145 degrees - Cutting with rotary shear along the entire working width - Clamping beam thickness: 15 mm - Upper beam can be raised to three positions - Upper beam stroke: 80 mm - Degree scale - Angle stop - Rear support frame for holding sheet metal - Front depth stops - Weight: approx. 250 kg The rotary shear (max. cutting capacity: 0.8 mm / steel) Rotary shear 0.8 mm – plus 350 EUR Manual seam closer – plus 75 EUR The machine complies with CE guidelines and comes with a 12-month warranty. Delivery costs: 180 EUR Price: 2200 EUR Delivery schedule: weekly Cash payment upon delivery We look forward to your enquiry! Invoices will be issued with 0% VAT for intra-community supply, or plus 19% VAT as applicable.

Kondisi: baru, Tahun pembuatan: 2026, HSBM 2020-20 SB - Manual Box and Pan Folding Machine HSBM SB - Heavy-Duty Manual Box and Pan Folding Machine with Segmented Clamping Beams - Easy operation - Segmented upper tooling - Folding function with secure clamping of the workpiece via preloaded top beam - Heavy, compact welded construction - Simple bending with precise angle adjustment using a stop with scale - Especially low maintenance Segment configuration: 25-30-35-40-45-75-100-150-200-200-270-400-400 Technical Data Note: Max. sheet thickness: Performance values based on material with tensile strength of 400 N/mm²; Stainless steel bending capacity: factor 0.75; Kwjdpfx Ajcnxc Njglst Aluminium bending capacity: factor 1.2; For bending stainless steel, hardened top tools are required. Model: HSBM 2020-20 SB Item No.: 3772920 Technical Specifications Max. working width: 2,020 mm Max. bending capacity, steel 400 N/mm²: 2 mm Max. bending capacity, stainless steel: 1.5 mm Max. bending capacity, aluminium: 2.4 mm Max. bending angle: 135° Segment configuration: Max. opening height between upper and lower beam: 120 mm Length: 2,500 mm Width: 710 mm Height: 1,500 mm Weight: 1,020 kg Location: Ex works - free loaded -