Pneumatik pres

Schmidt 24-041-89

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Rjdpfofxyhfsx Ahwop Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: baik (bekas), Tahun pembuatan: 1999, Pneumatic press, manufacturer SCHMIDT, model ZHS-2/22, year of manufacture 1999. Equipped with two-hand operation. UVV-certified until 2023. Rsdpeiduvcsfx Ahwjp

Kondisi: bekas, Tahun pembuatan: 1979, Pressure: 63 t Throat depth: 315 mm Stroke: 200 mm Drive power: 15 kW Ram stroke: 200 mm Max. installation height: 450 mm Rjdecxxmkjpfx Ahwjp Table size: 710 x 630 mm Ram clamping area: 710 x 630 mm Return force: 1.3 t Closing speed: 210 mm/min Return speed: 210 mm/sec Overall height above floor: 2500 mm Overall width: 1000 mm Depth: 1600 mm Motor speed: 1500 rpm Operating voltage: 380 V Control voltage: 220 V Machine weight approx.: 5 t Electro-hydraulic press control, fixed safety valve set to prevent overload, safety interlock, two-hand push button and emergency stop mushroom switch, stepless stroke adjustment, stepless pressure regulation, fully automatic continuous operation, mechanical stepless adjustable stop integrated in the cylinder. The stop adjustment is made via a handwheel with indicator scale. Automatic star-delta starter for the 15 kW motor.

Kondisi: baru, Hydraulic Punch Model EHS-120 Punching force up to approx. 12 t. Design and construction size according to specific requirements. Optional with fixed or mobile base frame, length stops, positioning system, etc. Redpfx Ahod Rh A Tjwep Upon request, we can provide the appropriate punching tool for your application. (The machines shown are equipped with customer-specific tools.)

Kondisi: bekas, Technical details: Pressing force: 2.3 t Stroke: 280 mm Throat depth: 155 mm Ram stroke - max.: Forward: 0.08 m/sec Rjdpou Nfwljfx Ahwep Shut height with bolster plate/ram up: 355 mm Distance table/ram: max. 355 mm Clamping plate on table: 280 x 280 mm Through-hole in table: Ø 100 mm Ram speed forward: 0.08 m/s Ram speed return: 0.32 m/s Taper hole in ram: Ø 20 x 45 mm Height above floor: 725 mm Total power requirement: 1.1 kW Machine weight approx.: 0.5 t Machine dimensions (LxWxH): approx. 0.6 x 0.7 x 1.6 m Press with mechanical 2-hand operation. Pressure test performed up to 2.3 t. Good condition.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, kedalaman tenggorokan: 100 mm, gaya penekanan: 2 t, lebar meja: 330 mm, panjang meja: 350 mm, diameter silinder: 28 mm, tekanan udara: 6 batang, Like-new HYUNDAE HP-2000 2t PNEUMATIC PRESS Rodpfevbfbwsx Ahwsp Manufacturer: HYUNDAE MACHINERY & ELECTRIC CO., LTD Model: HP-2000 Year of manufacture: 2021 Max. pressing force: 2t Working height: 300 mm Press table size: 350 x 330 mm Stroke length: 100 mm Cylinder diameter: 28 mm Mounted on a press stand Two-hand control Voltage: 110 V Air connection hose diameter: 12 mm

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 200 kg, Tahun pembuatan: 2000, gaya penekanan: 2 t, kedalaman tenggorokan: 150 mm, Hydraulic Press Atsugi Model AP-2-M Load Capacity Range: 5-20 kN Stroke (mm): 150 Working Speed: 60 mm/s Rapid Traverse Speed: 73.8 mm/s Operational/Ready for Use Dimensions Open Height: 250 mm Open Depth: 150 mm Rjdpfx Aevbdyfohwsp Table Size: 450 x 320 mm Motor Specification: 3-phase AC 200V, 4-pole, 1.5 kW Two-hand operation. Mobile work table Operating oil/quantity: Daphni Hydraulic 46 / 6L Total weight (kg): 200 Overall Dimensions Height (mm): 987 Width (mm): 505 Depth (mm): 735

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 3 t, Perlengkapan: penghadang cahaya keselamatan, For sale: As-new HYUNDAE CETTA HHP-3 hydraulic press "Multiple units available" Manufacturer: HYUNDAE (Korea) Model: HHP-3 Year of manufacture: 2018 Load range: 1–3 tons Stroke [mm]: 150 Working height: 250 mm Safety light curtain Two-hand operation Movable worktable Rodpfxsvbd U As Ahwsp Hyundae press control system Ram closing speed: 178 mm/s Ram pressing speed: 54 mm/s Opening speed: 79 mm/s Table size: 450 x 360 mm Max. working pressure: 60 kg·f/m² Hydraulic motor: 1.5 kW, 3-phase/4-pole, 200 V Weight: 350 kg Machine height (without table): 1415 mm Machine length: 950 mm Machine width: approx. 700 mm Worktable with rollers or leveling screws

Kondisi: baik (bekas), Hydraulic Punch Press Type HE Rjdpfed A Tp Tsx Ahwop - Punching force up to approx. 20 t - Power approx. 3 kW - Stroke approx. 100 mm - Table dimensions approx. W: 400 mm D: 300 mm - Installation height approx. 230 mm - Two-hand safety control system - Setup mode via foot switch Additional hydraulic and pneumatic punch presses in stock. Do you need the matching punching tool? – Let us know. We will gladly provide you with a suitable offer.

Kondisi: bekas, Tahun pembuatan: 2001, nomor mesin/kendaraan: 13242, Data teknis: - Gaya tekan: sekitar 20 kN - Langkah kerja: sekitar 6 hingga 58 mm - Kedalaman ruangan: sekitar 160 mm - Ukuran meja: 300 x 280 mm - Penyesuaian tinggi pemasangan dengan engkol tangan: 100–320 mm - Penjepit alat: 15 mm - Masukan udara: 7 bar Rjdpsx E Ub Hefx Ahwjp - Rangka mesin - Kebutuhan ruang: sekitar P 800 x L 800 x T 1600 mm - Berat: sekitar 60 kg