Mesin pengikat tepi

Schugoma LAS2407

Kondisi: bekas, Tahun pembuatan: 2015, POWER PC 85 + WOODWOP 6.0 kontrol (diperbarui 2023) Dimensi kerja: 3050 x 850 mm Ketebalan kerja: 12–60 mm Kepala bor dengan 19 spindle independen, tersusun sebagai berikut: – 8 spindle vertikal pada sumbu X – 5 spindle vertikal pada sumbu Y – 4 spindle horizontal pada sumbu X – 2 spindle horizontal pada sumbu Y 1 mesin frais vertikal 3-sumbu dengan pergantian alat otomatis Penukar alat otomatis 4-posisi 1 unit mata gergaji terintegrasi – diameter: 100 mm Daya total: 12 kW Berat: 1450 kg Iodpexp Rqijfx Aa Noal

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, The Cormak MJ45-KB4 panel saw with scoring unit is an advanced woodworking machine, also known as a panel saw with scorer. It is an ideal solution for cutting and processing various materials, primarily wood, chipboard, MDF, and other wood-based panels. Construction and Design: The Cormak MJ45-KB4 is a robustly constructed woodworking machine featuring a durable steel frame for stability during operation. The large work table rides on hardened steel rods, with a carriage length of 3200 mm, equipped with cutting units to ensure efficiency and accuracy. Main Cutting Unit: Scoring Unit: A key feature of this saw is the scoring unit, which pre-cuts the underside of the board to relieve internal stress within the wood. This prevents splintering and reduces the likelihood of material deformation after cutting. The scoring motor’s power of 0.75 kW ensures reliable scoring performance. Main Saw Blade: The Cormak MJ45-KB4 panel saw comes with a primary circular saw blade powered by an electric motor, enabling precise cuts through various materials. With a blade diameter of 350 mm, the maximum cutting height reaches up to 105 mm. Manual Scoring Adjustment: The straightforward and effective manual adjustment of the scoring unit allows for quick and accurate setup. Index stops make it easy to return to previous settings, while the intuitively located adjustment controls allow operators to make changes without interrupting workflow. Panel Saw Features: Large Working Surface: Equipped with a spacious working area, this panel saw enables comfortable handling of large material sheets. Smooth Carriage Travel: The feeding system uses precision-hardened steel guides with steel ball bearings for effortless longitudinal cutting, even with large panels or plywood sheets. Angle and Depth Adjustment: The cutting angle and cutting depth can be easily adjusted, allowing customization for specific project requirements. Iodpotz Smijfx Aa Njal Safety Systems: The panel saw is fitted with safety features such as blade guards and emergency stop systems for safe operation. Applications: Panel saws with scoring units are mainly used in woodworking and window manufacturing workshops for cutting wood and wood-based materials. They are particularly suitable for cutting boards, chipboards, MDF panels, and similar materials. The Cormak MJ45-KB4 stands out for its high precision. Technical Specifications: Table dimensions: 990 x 575 mm Sliding table length: 3200 mm Cutting width at rip fence: 1250 mm Cross-cutting capacity at crosscut fence: 3100 mm Saw blade tilt: 0° - 45° Saw blade diameter: Ø350 mm Saw blade bore: Ø30 mm Saw blade cutting height: 0-105 mm Saw blade cutting height at 45°: 0-73 mm Main saw spindle speed: 4000 / 6000 rpm Scoring blade diameter: Ø125 mm Scoring blade bore: Ø20 mm Scoring spindle speed: 8000 rpm Main motor power (S1/S6): 5.5 kW / 9 HP Scoring motor power (S1/S6): 0.75 kW / 1.2 HP Main dust extraction port diameter under table: 100 mm Blade guard extraction port diameter: 80 mm Machine weight: 680 kg The saw is sold without cutting blades. Price does not apply to machines sold in Poland.

Kondisi: seperti baru (mesin pameran), jam operasional: 6 h, daya: 4 kW (5,44 hp), laju aliran volumetrik: 0,57 m³/jam, tekanan (maks.): 10 batang, jenis pendinginan: udara, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, Kompresor piston industri RENNER dengan pengering pendingin Kapasitas hisap: 700 l/menit (output: 570 l/menit) Tekanan maksimum: 10 bar Tangki tekanan: 270 l Daya motor: 400V 4,0 kW Dimensi: 970 x 795 x 1880 mm Model berdiri untuk aplikasi industri, pelindung sabuk yang kokoh, tangki udara bertekanan galvanis sesuai pedoman AD2000 (dengan lubang inspeksi) dengan pendingin antar dan akhir, bantalan anti-getar untuk pengurangan getaran yang efektif, dengan pengering pendingin, opsonal dengan katup buang kondensat otomatis untuk pengering dan tangki; Ijdpfxod Dhwno Aa Neal Tersedia berbagai model lainnya.

Kondisi: bekas, Tahun pembuatan: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for edge heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical specifications: - Machine table with 13 support rollers for improved workpiece guidance - Edge feed, synchronized with conveyor belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Conveyor feed: - 0.25 kW - Approx. 1250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber coating - Digital counter for height adjustment - Direct glue application to the workpiece: Drip-proof glue pot with bottom glue supply and quick heat-up time after machine standstill - Flush cutting unit: - For workpiece front and rear edges - Automatic sensing on the workpiece - Pneumatic cutting with knife for cuttable edges - Flush trimming unit: - With vertical scanning and horizontal guidance - Reproducible adjustment via digital counters - 2 powerful 0.4 kW high-frequency motors - Infinitely variable speed from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2mm/15° - Central extraction port Ø 100 mm - 2 chip extraction covers with hose Ø 60 mm - Automatic height adjustment of the top cutter with conveyor feed - Continuous workpiece support, approx. 1800 mm long - Extension workpiece support rail, approx. 300 mm extendable - Rotatable foil carousel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm Iajdpfewka S Iox Aa Nel - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Power connection: 400V, 50 Hz, 3Ph + N - Total power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without foil carousel): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: Short notice Location: Flörsheim

Kondisi: baru, Delivery pressure: 11 bar Intake capacity: 480 cm³ Volume flow: 360 Tank capacity: 270 l / bar Number of cylinders: 1 pc. Motor: 400 Volt / 3.0 kW V / kW Iaodpfx Aaovkizge Nel Speed: 892 rpm Machine weight: approx. 200 kg Dimensions (L x W x H): 1.6 x 0.7 x 1.2 m

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, SCHEER FM 16 Panel Saw System – DNC 3100 x 3100 As-new condition – Machine No. 33542 The SCHEER FM 16 is a high-performance, electronically controlled panel saw featuring state-of-the-art drive technology and an intuitive control system. The machine has been completely overhauled and newly painted – its condition is virtually as-new. Ideally suited for precise, automated cutting of wood-based panels in continuous industrial operation. Key technical data: Cutting length: 3,100 mm Saw depth / blade projection: 80 mm Main saw motor: 7.0 kW Scoring saw motor: 1.1 kW (can be switched on/off) Feed speed: 2 – 40 m/min (infinitely variable) Iedpfx Aaeunwk To Njal Return: Rapid traverse, automatic lowering Operator interface: SCHEERWIN, graphical, document-oriented (64-bit), running on Windows 10 Drive system: Küenle inverter with Stöber synchronous servo drives incl. absolute encoders – for highest positioning accuracy and dynamic control Features & equipment: Longitudinal panel saw FM 16-3100 with hardened guides and automatic forward/reverse Material feed table HP 5021 with 6 clamp grippers, servo drive & measuring accuracy of 0.05 mm Automatic angle pressure device WP, adjustment range 2,400 mm Off-cut device SP 5000 for minimum off-cuts as small as 5 mm Angle stop table HP 5024 (1,800 x 800 mm), steel angle with Pertinax surface Workpiece support table HP 5025 (1,800 x 800 mm), also with Pertinax surface Air cushion system in the front tables incl. radial fan Saw blades included: KSB 4005 for main saw (305 mm dia., Z = 60) KSB 4006 for scoring saw (200 mm dia.) Condition & Service: Condition: Factory reconditioned & as-new Functionality: Fully operational Warranty: 12 months Reliability in intensive use: This machine operates reliably worldwide—even under extreme conditions. Whether in Africa’s dry climate or in high humidity environments in Southeast Asia (e.g., Thailand), the SCHEER FM 16 runs flawlessly in 3-shift systems—365 days a year—and impresses with its exceptional precision, stability, and durability. Warranty: We are so confident in the quality and robustness of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excluding electrical supplied parts and consumables.) Flexibility & customization: We offer various models and configurations for every budget. Custom solutions tailored to your individual requirements are also available. 📞 Contact us for a personalized offer or to schedule a viewing. Machine available ex stock. Delivery, commissioning, and training available as options.

Kondisi: bekas, nomor mesin/kendaraan: 007361, arbeitsbereich_achse_x_3050_y_850_spindel_9kw_3achsen_19bohr_3wz plaetze Iodpfxox A Tibs Aa Njal

Kondisi: siap digunakan (bekas), Technische Daten Iaedouaz H Iopfx Aa Njl Verfahrwege: X-Achse: 3.290 mm Y-Achse: 1.100 mm Z-Achse: 326 mm Werkstückdurchlass: 170 mm Elektrospindel: 5-Achs-Spindel, 11 kW HSK F63 Werkzeugaufnahme Revolver-Werkzeugmagazin mit 16 Werkzeugplätzen Werkzeugmagazin am Ende des Arbeitstisches, 10 Werkzeugplätze Bohrkopf BH26 2L: Vertikale und horizontale Bohraggregate sowie Nutaggregat 16 vertikale Bohrer, 32-mm-Teilung (je 8 in X- und Y-Richtung) 8 horizontale Bohrer, 32-mm-Teilung (je 4 in X- und Y-Richtung) 2 Nutmesser, Ø 120 mm, zur Nutbearbeitung in X und Y (Nutzschnitt 25 mm) Unabhängige Z-Bohrgruppe zur Optimierung der Bearbeitungszeiten Arbeitstisch: CNC-gesteuerter Arbeitstisch mit motorisch verfahrbaren Trägerbalken 6 ATS-Balken mit automatischer Positionierung (EPS) und Saugern 3 verfahrbare Sauger pro Balken mit motorischem Antrieb 1 Vakuumpumpe, 250 m³/h Steuerung: Über Windows PC RM850 Fernbedienung mit integriertem LCD-Display 2 Fußschalter für Zyklusstart Gesteuert über BiesseWorks Software Software-Version BiesseWorks Advanced: Programmierung und Optimierung von Bohr-, Schnitt-, Fräswegen sowie Werkzeugwechsel Individuelle parametrische Makros Dateiimport über Netzwerk und/oder USB 3D-Simulation für Werkstück und Werkzeugwege Parametrische Programmierung des Werkstücks Kollisionsüberwachung Werkzeugsätze und parametrische Konen im Lieferumfang Leistung und Motoren: Spannung: 400 V Anschluss: 3-phasig Leistung: 17 kW Motorleistung: 18 PS Abmessungen: Länge: 5.412–5.912 mm Breite: 5.120 mm Höhe: 2.910 mm

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang pemotongan (maks.): 3.300 mm, diameter mata gergaji: 315 mm, ketinggian potong (maks.): 82 mm, kecepatan pemakanan sumbu X: 100 m/menit, laju pemakanan sumbu Z: 150 m/menit, panjang total: 3.300 mm, lebar total: 3.350 mm, berat keseluruhan: 3.000 kg, penggerak gergaji: 9.000 W, daya: 9 kW (12,24 hp), kecepatan rotasi (maks.): 4.400 rpm, kecepatan mata gergaji: 4.400 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, SCHEER PA 4500 – 3300 x 3350 S7WIN10 Year of manufacture: 2025 | Condition: NEW | Control: PA-WIN10 + SIMATIC S7 | High-Performance Panel Saw System for Maximum Precision & Efficiency The SCHEER PA 4500 is a robust, industry-proven panel dividing saw designed for precise machining of coated and uncoated wood-based panels. Engineered for demanding applications, its standard configuration already meets all requirements for modern cutting operations. Main Technical Data: - Cutting length (max.): 3300 mm - Cutting height (infinitely variable): up to 82 mm - Main saw blade: Ø 315 mm | 60 teeth | Cut width 3.2 mm - Scoring saw blade: Ø 200 mm | conical | Cut width 3.2–4.0 mm - Main saw motor: 9.0 kW - Scoring unit motor: 1.1 kW - Saw carriage drive: 2.32 kW - Main saw blade speed: approx. 4400 rpm - Saw carriage feed: 0–100 m/min (variable adjustment) - Saw carriage return: 150 m/min (lowered) - Electrical connection: 400V / 50Hz / 3Ph - Pneumatics: 6 bar, 15 NL/cycle - Extraction: 3 x 140 mm | Capacity: 3300 m³/h at 20 m/s - Working height: approx. 930 mm - Angle stop: left Machine Concept & Highlights: - Heavy-duty cast honeycomb frame for vibration damping - Absolute value encoder for highest positioning accuracy (no referencing required) - Distance- and time-optimized saw carriage movement - Automatic oil mist lubrication & guideway blow-off - Program-controlled saw blade adjustment (height & scoring side) Iaedpfowrpcxjx Aa Njl - ProLock quick-change system for the saw blade - "Dust-tested" – emissions only 0.65 mg/m³ Machine Equipment: - 1x Angle pressure device WP 8500-1400 Adjustment range: 0–2200 mm Pressure force: approx. 480 N Cycle-controlled retraction function for panel handling - 1x Feed table HP 5130 – 33 x 33 Rear-mounted with hardened guides & racks Roller conveyor system for smooth panel transport - 6 clamp fingers (spacing: 70 / 262 / 454 / 838 / 1173 / 2630 mm) Servo drive with ±0.1 mm accuracy - 1x Angle stop table HP 5137-1-1465 - 1x Workpiece support table HP 5135-1-1465 Each with Pertinax coating, 1465 x 800 mm - 1x Air cushion system LK 5169 Central radial fan, max. pressure 2800 N/m² - 1x Control cabinet Dust-tight, separately mounted, vibration-protected - 19" TFT flat panel monitor, keyboard, trackball Control & Software: - SIMATIC WinLC RTX soft PLC with S7 functionality - PA-WIN10 user interface on Windows 10 Professional (64 bit) (upgrade to latest Windows version possible at any time) - True-to-scale real-time simulation and graphical cut pattern editor - Integrated interfaces (label printing, panel storage management, etc.) - Network-compatible, future-proof, and modularly expandable Operating Modes & Operation: - Manual mode: single cut, chain dimension, trimming, remnant cutting - Automatic mode: processing of cut plans, online order processing - Editor: batch list-based planning & optimization - Maintenance & diagnostics: saw blade measurement, single component control, etc. 📞 Contact us for a personalized quote or to arrange a viewing. Delivery, installation, commissioning, and training are optionally available.

Kondisi: bekas, Tahun pembuatan: 1996, Used machine Year of manufacture: 1996 with heated infeed rail Gluing station with electronic temperature control and reversible feed function (forward and reverse) - End trimming unit - Milling unit - Profile scraper - Buffing station - Edge thickness: 0.4 - 5 mm - Panel thickness: up to 50 mm - Minimum part length: 150 mm - Minimum part width: 60 mm - Workpiece thickness: 8 - 50 mm - Feed speed: 12 m/min Iajdpfxskwg Tbj Aa Nel Dimensions (L x W x H): approx. 4000 x 1260 x 1600 mm (Width can be reduced to 800 mm for shipping by removing the extendable support) Availability: by arrangement Location: Hochheim