Garis tekan

SCHULER E4-600-3.35-762

Tahun pembuatan: 1990, Kondisi: hampir baru (bekas), Gebrauchte Schuler Hydraulikpresse zu verkaufen Hersteller: Schuler Crjdpehcnxrefx Anzog Modell: Schuler EB 2-500-2,75-0,85 H-Rahmen-Hydraulikpresse Presskraft: 500 Tonnen Tischabmessungen (x-y/mm): 3000 × 1800 Stößelabmessungen (x-y/mm): 3000 × 1800 Hub (x/mm): 850 Hübe pro Minute: von 12 bis 24 Steuerung: Siemens S7 Neue Hydraulikpressen verfügbar

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Pressing force: 320 t Sheet thickness: 0 mm Strokes per minute: 80 spm Crodpovwgl Njfx Anzeg Total pressing force: 320 t Stroke: 30 - 80 mm Clamping area (lower table): 630 x 740 mm Clamping area (upper table): 630 x 630 mm Total power requirement: 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in as-new condition with new CE marking. MAIN RAM Total force (nominal): 320 t Minimum stroke: 30 mm Stroke: 80 mm V-RING Nominal force: 160 t Stroke: 30 mm COUNTER RAM Nominal force: 80 t Stroke: 30 mm TOOL DIMENSIONS Lower table - width: 630 mm Lower table - depth: 740 mm Upper table - width: 630 mm Upper table - depth: 630 mm Max. daylight: 320 mm ELECTRICAL SPECIFICATIONS Total power consumption: 60 kW

Kondisi: diremajakan ulang (bekas), EXZENTERPRESSE SGP TYP: PEZZ 500/1700/1000 PRESSKRAFT: 500 t TISCH: 1700 x 1000 mm HUBLÄNGE: 20–153 mm Credpfxehqqnzo Anzeg STÖSSEL OBEN-TISCH: 800 mm STÖSSEL UNTEN-TISCH: 700 mm GEWICHT: 40 t HERGESTELLT IN ÖSTERREICH

Kondisi: bekas, Lasko Hammer KGK 063 Impact force: 630 mkp Maximum stroke: 630 mm Ram weight: 630 kp Overpressure – Filling pressure: 5 bar Csdpfx Aju Eb Nijnzjrg

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 independent - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - CNC control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar feeder Credjuhauyepfx Anzog - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip evacuation system: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X and Z axes CNC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: X and Z axes CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: X and Z axes CNC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled with counter spindle - Slide unit 6.2: X and Z axes CNC-controlled EQUIPMENT - CNC control: SIEMENS 840D - Counter spindle - Polygon turning unit: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit - Parts removal Cjdpfxsuhatpo Anzjrg - Parts ejector - Fire protection system: KRAFT UND BAUER * Note: Functionality not guaranteed. Must be checked by a qualified company commissioned by the buyer.

Kondisi: bekas, Double-column hydraulic press SMG Type HBP 200 - 2000 / 2000 Serial No. 7.4117 Year of manufacture: 1986 - Refurbished in 2000 Pressing force: 200 tons Distance between uprights (front): 2050 mm Clearance between uprights (lateral): 2030 mm Table size: 2800 x 2000 mm Ram area: 2000 x 2000 mm Ram stroke: 700 mm Maximum installation height: 1850 mm Table height above floor: 750 mm Ram return force: 33 tons Rapid advance speed: 500 mm/s Pressing speed: 72/36 mm/s Return speed: 420 mm/s Safety distance: 230 mm Main motor power: 75 kW Control pump motor power: 11 kW Power supply: 380 Volt, 50 Hz - 8-way flat guide for ram - Clamping plate with 22 mm T-slots on ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in top dead center Credjdzp Tcjpfx Anzsg - Travel measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS PLC S7 - Free-standing control cabinet - Two-hand control console, free-standing - Ground-level installation - Central lubrication system - Operating manual with circuit diagrams Space requirement (upright): L x W x H 3700 x 2900 x 5900 mm Total machine height with motor: 5900 mm Space requirement for horizontal transport: L x W x H 5900 x 3250 x 2950 mm Weight: 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000 onwards, the machine was used as a try-out press in a toolmaking facility. Good condition

Kondisi: baik (bekas), en-GB: Manufacturer: WMW Zeulenroda Model: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height: 850 mm Bolster plate thickness: 100 mm Throat depth (C side): 360 mm Specifications Metric | US Standard Capacity: 160,000 Table length: 1,250 mm Table width: 600 mm Ram stroke: 500 mm Approach speed: 100 mm/min Working speed: 10 mm/min Return speed: 125 mm/min Motor power: 22.5 kW Dimensions (approximate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Cjdjwp Nv Hopfx Anzorg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. As such, no representation or contractual obligations are implied. We recommend verifying all critical details.

Tahun pembuatan: 1980, Kondisi: bekas, Pressure 80 t Reach - mm Stroke 50 mm Table area 875 x 695 mm Ram area 350 x 355 mm Ram adjustment 71 mm Strokes per minute 30 - 90 spm Frame opening 450 mm Machine weight approx. 6.2 t Space requirements approx. 2.0 x 2.1 x 3.2 m Installation height (stroke bottom, ram adjustment top) 480 mm Codpfx Anjdlcy Hozjrg Additional information: - The machine is currently undergoing partial overhaul - The machine has been newly equipped with the following components: * Separate free-standing control cabinet with touchscreen incl. wiring * New paintwork of individual components in disassembled state After the partial overhaul, the machine will be safe for manual loading operations with open tools. Before delivery, a current accident prevention inspection (UVV) and brake time measurement will be carried out.

Kondisi: siap digunakan (bekas), Pressing force: 1600 kN, throat depth: 450 mm, installation height: 560 mm, ram stroke: 8–160 mm, control system: SCHMERSAL SEPG 05.3.2.0.22/95, weight: 16.2 t, including documentation. Codshz Ua Sepfx Anzsrg