Mesin cetak kolom ganda

SCHULER EBS4-800-3,5-700

Kondisi: bekas, Tahun pembuatan: 2004, en_VErnGNwKJDgr1wSjQd5yMZ Nkedpfx Ahjv Svarswou

Kondisi: bekas, Tahun pembuatan: 1988, Pressing force 400 t Upright distance 1,100 mm Stroke 250 mm Stroke rate 25 - 75 /min Distance table/ram, max. stroke up, adj. up 900 mm Table surface 1,100 x 965 mm Ejector force in table 30 t Ejector stroke in table 80 mm Ejector force in ram 3 t Ejector stroke in ram 60 / 70 mm Nodpjvuuknefx Ahwsku Ram surface 980 x 800 mm Lateral gap between uprights 800 mm Ram adjustment 20 mm Drive power 80.0 + 5.5 kW Weight 47.0 t Space requirement (W x D x H) 3.5 x 3.3 x 6.0 m Control cabinet weight 1.4 t Space requirement control cabinet (W x D x H) 4.9 x 0.5 x 2.6 m Multi-stage cold forming press with articulated drive with steplessly adjustable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the ram, motorized ram adjustment, pneumatic balance cylinder in the press frame, cam-controlled ejector in the table (30 t / 80 mm), pneumatic ejector in ram (3 t, 60 mm), motorized centralized lubrication system Can be offered without commissioning or alternatively with new Siemens S7-1500 F control system

Kondisi: bekas, Tahun pembuatan: 1988, 0001 Nodpfx Ahovut Hnsweku

Kondisi: bekas, Tahun pembuatan: 2003, Pressing force 400 t Frame gap 1060 mm Stroke 450 mm Strokes per minute 15 - 30 Distance table/ram, max stroke up, adjustment up: 1160 mm Table area 1000 x 700 mm Ejector force in table 2 x 16 t Ejector stroke in table 125 mm Nodpfx Ahovzxpujwsku Cushion force in table 120 t Cushion stroke in table 2 mm Ejector force in ram 2 x 4 t Ejector stroke in ram 100 mm Ram area 1000 x 700 mm Lateral frame passage 630 mm Drive power 55.0 kW Weight 50.0 t Year of manufacture 1986 - Overhauled 2003 Multi-stage press with automatic parts feed, transfer system, cushion in table (2nd stage) as is, stored disassembled, WITHOUT commissioning

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), Used hydraulic press SACK & KIESSELBACH TRP 200. Originally designed as an automatic transfer press, it was converted to manual operation in 2012 but can be retrofitted for automatic operation again. The press remains installed, under power, and is in very good condition. Njdpfxjhtaaqs Ahwjku Press force in t: 200 Oil capacity in litres: 1100 Stroke in mm: 300 Table dimensions (LxW) in mm: 600 x 600 Installation space in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12,000 Operating pressure in bar: 6 Rapid approach speed in mm/sec: 375 Working speed in mm/sec: 18 - 40

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Produsen: MURARO Model: ID500/250 Tahun: 2001 Kondisi: Bekas Nomor stok: Cod. 0114 Tekanan maksimum slide atas: 500 ton Stroke slide: 900 mm Celah vertikal maksimum: 1.500 mm Ukuran meja: 2.700 x 1.600 mm Ukuran slide: 2.700 x 1.600 mm Nksdpfx Ahsx R U R Eowou Ukuran meja penahan lembaran: 2.450 x 1.250 mm Kecepatan mendekat slide: 650 mm/detik (pendekatan) Cushion penahan lembaran – total gaya: 250 ton Stroke cushion penahan bawah: 400 mm Tinggi mesin press dari lantai: 5.600 mm

Kondisi: bekas, Tahun pembuatan: 1979, Pressure 160 t Gap between uprights 1620 mm Stroke 600 mm Distance table/ram, stroke at top 800 mm Table area 1600 x 1100 mm Table height above floor 750 mm Cushion pressure in table 63 t Cushion stroke in table 180 mm Cushion area in table 1300 x 750 mm Lateral upright clearance 600 mm Ram area 1600 x 1100 mm Oil capacity 1160 l Drive power 30.0 + 16.0 kW Weight 23.6 t Space requirement (WxDxH) 2.9 x 2.3 x 4.65 m Height above floor 4.26 m Approved for manual loading/unloading in accordance with German accident prevention regulations (UVV) with oil-hydraulic drive, hydraulic cushion in table No foundation pit required Can be offered as is, with commissioning, or alternatively with new Siemens S7-1500 F control system Nodpfx Aevut Ryjhwoku Video at the seller available prior to dismantling

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 1.000 t, lebar meja: 1.500 mm, panjang meja: 2.000 mm, gaya penarikan balik: 350 t, panjang langkah: 1.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHSP 1000/350 H-Type Hydraulic Deep Drawing (Stamping) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting (ram + blank holder) system architecture for high-tonnage sheet metal forming, deep drawing, and stamping applications. The eight-guideway H-frame construction ensures high rigidity during pressing operations, maintaining parallelism and perpendicularity tolerances even with large table dimensions. The CHSP 1000/350 model, featuring a 1000-ton main ram and 350-ton blank holder (cushion) capacity, is specifically designed for deep drawing processes requiring controlled material flow, especially in the automotive, white goods, defense, and heavy industry sectors. The stress-relieved steel welded frame offers long-lasting and reliable operation. ⚙️ Standard Equipment • Steel construction, eight-guideway H-frame press body • Stress relieved by vibration • Bronze Zr14 slideway bushings • Welding applications certified by TÜRK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning • Display of hydraulic unit oil temperature and system status on the panel • Off-line filtration and cooling system • SIEMENS – SCHNEIDER switching components • Safety systems for operator protection 📐 Technical Specifications – CHSP 1000/350 Type: Steel construction, eight-guideway H-frame press body Frame Material: St52 – ERDEMİR Slideway Bushings: Bronze Zr14 Capacity (Ram): 1000 Tons Capacity (Blank Holder): 350 Tons Movable / Fixed Table: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/m Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight (Min / Max): 100 / 1100 mm Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Nedpfxox N Uile Ahwoku Main Cylinder: Ø500 mm – Ck45 (2 units) Blank Holder Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 65 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.