Press eksentrik

Schuler PD 63-250

Kondisi: bekas, Tahun pembuatan: 1970, Pressure: 63 t Psdpfecxxx Hox Agdjrb Throat depth: 250 mm Stroke: 8–100 mm Table depth: 710 mm Table width: 500 mm Ram dimensions: 450 x 280 mm Ram adjustment: 63 mm Stroke rate: 140 strokes/min Total power requirement: 7 kW Machine weight approx.: 3.5 t

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Electronic saw height adjustment Working area, square max.: 170x170 mm Working area, flat max.: 300x150 mm Working area, round max.: 200 mm Saw feed: 0 – 40 mm/s, stepless adjustment Cut length: 5-950 mm (9999 mm with multiple stroke) Feed speed max.: 500 mm/s Pedpjuiy Hrjfx Agderb Weight approx. 1,900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After a comprehensive retrofit, the machine is in like-new condition both technically and visually. Thanks to its features and robust design, it is highly efficient and suitable for a wide range of applications. The programmed HMI control enables easy and highly profitable operation. The soundproof enclosure minimizes noise emissions. The machine is completely overhauled in our facility according to customer requirements. The overhaul includes, among others, the following upgrades: - Conversion to Siemens S7 PLC - Upgrade to Siemens HMI operator interface - Replacement of the ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of wear parts - Refurbishment of the enclosure Additional features: - Soundproof enclosure - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor and wear parts are excluded from the warranty. Options: - Multiple clamping device for parallel sawing of several workpieces - Flat magazine for automatic loading of material up to 6 m in length - Roller conveyors for raw material - Reinforced motor 18.0 kW (frequency controlled) - Delivery and installation at your site - Training for your personnel

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Control System: Siemens S7 PLC Max. Saw Blade Diameter: 500 mm Motor Power: 4.0 kW Saw Blade Feed: Infinitely adjustable 0–40 mm/s Electronic Saw Height Adjustment Working Range Square 90° max.: 130 x 130 mm Working Range Flat 90° max.: 190 x 130 mm Working Range Round 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. The following components have been renewed, among others: Conversion to Siemens S7 PLC control Upgrade to Siemens HMI operator interface Upgrade to servo-driven pusher New electrical components New pneumatic lines New pneumatic components Prsdouiy Ngjpfx Agdob Conversion to valve manifold technology Optimized extraction performance New minimum-quantity lubrication system Replacement of general wear parts Overhaul of the operator cabin Additionally, the machine is equipped with: Minimum-quantity lubrication system Saw kerf expansion (for high-quality cut surfaces without scoring) Pre-feed magazine for gentle handling of painted/anodized surfaces Scrap ejector integrated into pusher Foldable scrap tray Options: Magazine width 3000 mm Pusher length 6000 mm Pusher length 8000 mm Reinforced motor 5.5 kW Mass clamping device for parallel cutting of multiple workpieces Online support connectivity Delivery and installation at your site Staff training

Kondisi: bekas, Tahun pembuatan: 1996, Pressing force: 80 t Throat depth: 320 mm Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table size: 830 x 610 mm Ram surface: 650 x 400 mm Frame opening (rearward): 630 mm Total power requirement: kW Machine weight approx. 8.1 t Space requirements approx. W 1.2 x D 1.9 x H 3.3 m Equipment: - With gear drive - Fixed table - Automatic stroke adjustment - Automatic ram adjustment - Hydraulic overload protection - Ejector - Central grease lubrication - Cover plate for drop-through hole - Infinitely variable speed control via frequency converter Psdpfx Aotycdkjgderb - The machine will be technically inspected and overhauled in-house, and will receive a new control cabinet with safety controls and touchscreen - Current accident prevention inspection (UVV) including brake time measurement

Kondisi: bekas, Pressure: 55 t Outreach: 250 mm Stroke: 10–90 mm Pedocp Apyopfx Agdsrb Table size: 640 x 495 mm Strokes per minute: 120 spm Slide adjustment: 55 mm Slide area: 290 x 210 mm Slide bore: 40 H7 mm Passage opening in table: 220 x 190 mm T-slots: 22 mm Clamping plate: 620 x 485 x 65 mm Total power requirement: 4.5 kW Machine weight approx. 3.4 t Space requirement approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination - Centralized lubrication system by Vogel - Balluff cam controller - Height-adjustable table - Mechanical overload protection in the ram (shear plate) - Control cabinet with touchscreen - Foot switch

Kondisi: bekas, Tahun pembuatan: 2014, Suitable for the extraction of oil mist. Nominal air flow: 950 m³/h Noise level: 71 dB(A) Psdpfx Agjwnprxoderb Speed: 2850 rpm Dimensions (W x D x H approx.): 525 x 592 x 781 mm Weight approx.: 55 kg Connected load approx.: 0.75 kW (400 V / 50 Hz) Colour: Grey

Kondisi: baru, Tahun pembuatan: 2024, 20 t pressing force Pedpfxovfhqij Agdsrb Outreach: 155 mm Stroke: 6–60 mm Stroke rate: 84–210 strokes/min Ram adjustment: 50 mm Installation height (with ram adjustment at top): 300 mm Table surface: 300 x 450 mm Table height: 840 mm Pass-through opening in table: Ø 90 mm Ram surface: 190 x 278 mm Pin bore in ram: Ø 25 mm Total power requirement: 1.5 kW Machine weight approx.: 1.0 t Space requirement (LxWxH): approx. 1100 x 1100 x 1900 mm Machine number: 16144 LED machine lamp Stroke rate frequency-controlled Sick light barrier for protection and cycle operation 4x programmable electronic cams 4x freely programmable tool safeties Machine feet Two-hand operation Foot operation Central lubrication Pneumatic clutch-brake combination Approved for manual loading/unloading operations

Kondisi: baik (bekas), gaya penekanan: 80 t, kedalaman tenggorokan: 400 mm, penyesuaian silinder hidrolik: 80 mm, Pressing force: 80 tons Table area: 750 x 550 mm Ram adjustment: 80 mm Stroke length: 8 - 112 mm Strokes per minute: 78 spm Predpfjugtkxex Agdeb Throat depth: 400 mm Equipped with: - Air clutch - Safety guard Country of origin: Germany Machine dimensions (LxWxH): 2000 x 1200 x 2900 mm Approximate machine weight: 7000 kg

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1980, Meja kerja 500mm x 1200mm Pergerakan lengan 600mm Penjepit alat MK 4 Pedjx N Ih Iopfx Agdorb Kapasitas pengeboran 32mm pada baja Perangkat pembuat ulir Perangkat pendingin Pelindung pada bor Direkondisi total pada 2026

Kondisi: baru, Tahun pembuatan: 2026, Vollautomatisches Schneiden von großen Aluminiumprofilen mit benutzerfreundlicher Automatisierung. Legen Sie beliebige Aluminiumprofile ein – die Maschine erkennt sie automatisch und führt die Zuschnitte mit hochpräziser Servomotor-Materialpositionierung gemäß Arbeitsauftrag durch. Excel-Joblisten können zur effizienten Eingabe umfangreicher Zuschnittlisten per WIFI importiert werden. Optional vollautomatischer Inline-Optimierer: Automatische Messung der Aluminiumprofil-Längen mittels Lasersensor und fortlaufende Listenoptimierung basierend auf der gemessenen Länge zur Minimierung von Verschnitt. Automatischer Druck von Auftrags-/Teilenummer-Etiketten für jedes produzierte Teil (optional). • Vollautomatischer Schneidbetrieb mit Profilschub und Längenzuschnitt. • Intuitive Bedienoberfläche für den vollautomatischen Betrieb – Auftrag eingeben und Zuschnitt in wenigen Sekunden starten. • Vereinfachte Bearbeitung von Einzelteilen, Serien oder umfangreichen Excel-Auftragslisten. • Gebündeltes oder Mehrfachstangenschneiden und -zählen. • Fernübertragung der Excel-Joblisten per WIFI mit flexibler Datenzuordnung. Prjdpfxsl Sm Elo Agdjb • Komplett einstellbare Säge- und Vorschubgeschwindigkeit für maximale Prozessleistung. • Automatikmodus mit Aluminium-Lasermessung und Optimierung für minimalen Verschnitt (optional). • Automatischer Etikettendruck für Teile basierend auf den Jobdaten (manuelle Etikettenanbringung, optional). • Direktdruck auf das Material inline, ohne Bedienereingriff (optional). • Barcode- oder QR-Code-Druck bzw. -Scan zur Auftragserfassung (optional). • Automatisierte Servo-Verstellung des Sägegehrungswinkels bis ±75° (optional). Ideal geeignet für: • Serienfertigung von Aluminiumprofilen • Herstellung von Gehrungs-Konstruktionen aus Aluminium • Fertigung von Fenstern und Türen • Herstellung von Jalousien, Rollos und Möbeln • Bau von Aluminiumkonstruktionen • Herstellung von Aluminiumfassaden Modell: A700 Länge: 3 m Materiallänge: 1680 mm Schubkraft: 20–40 kg Software: Optimierer HOCHWERTIGE, IN AUSTRALIEN HERGESTELLTE MASCHINEN.