Trailer truk bak jungkit

Schwarzmüller SPA 3/E Kippauflieger / Swiss-Vehicle

Kondisi: bekas, Tahun pembuatan: 2020, Fungsionalitas: belum diuji, tinggi total: 6.400 mm, lebar total: 4.500 mm, panjang total: 3.800 mm, kecepatan operasi: 110 mm/dtk, kecepatan mundur: 180 mm/dtk, tabel jarak ke piston: 1.500 mm, We are offering a newly built machine of the type shown here. The machine was commissioned in 2020 and can be inspected at the customer’s site. Technical Data: - Pressing force: 800 tons - Opening force: 80 tons - Motor power: 55/75 + 55/75 kW - Ram stroke: 1,000 mm Bcedpfx Aewlrv Uohwsw - Fast advance speed: 110 mm/s - Working speed: 6 mm/s - Return speed: 180 mm/s - Guide column diameter: 250 mm - Maximum pressure: 250 bar - Usable table area: 3,500 x 2,000 mm - Lower table travel: 2,000 mm - Distance between columns: 2,000 mm - Daylight opening: 1,500 mm - Total front width: 3,800 mm - Total side length: 4,500 mm - Overall height: 6,400 mm - Weight: 134,600 kg The MV-800E/NC-SINCRO press was specifically developed for the setting and testing of molds, dies, and stamps. The four columns, each with a diameter of 250 mm and made from C45E steel, are manufactured for heavy-duty applications. It features an optimized hydraulic system operating at up to 250 bar, ensuring long service life and reliability. The machine complies with all relevant safety and health requirements according to CE regulations. STRUCTURE AND TABLE • Frame designed to withstand 600 tons of concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table area: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC SYSTEM • Two double-acting hydraulic cylinders, each with 400 tons force. • Single-stage hydraulic power unit with automatic shut-off of advance speed and independent operation, equipped with a decompression system and proportional pressure pre-fill valves. Digital potentiometers on the upper table for displacement control and an electronic synchronizing system for compensation of off-center or unbalanced loads. • The press is equipped with a lateral pressure switch for optimal pressure adjustment for each job. • Glycerin pressure gauge with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electrical system allowing operation with one or two main cylinder advance speeds. • The press offers both manual and automatic cycle modes (activated via a test selector switch): - Manual cycle allows step-by-step execution of all press movements at low speed. - Automatic cycle allows the press to run a complete production cycle. • Electrical safety system for upper table fall protection. • Lower table with hydraulic extraction and mechanical stops. • The machine is equipped with an operator panel featuring a touchscreen display for input of operating and calibration data. • 2 safety light curtains (category IV, 1,000 mm) installed at the front and rear. • Electrical components by Siemens, manufactured to IP55 protection class in accordance with applicable CE regulations and standards. • Electrical and hydraulic functions are redundant and self-monitored. Includes an additional safety block and self-check devices for operation and safety. Includes verification and certification of proper function and safety distance for light curtains. • Safety is ensured by a laser and area protection system with category IV light curtains.

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 5.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2089, tinggi total: 5.000 mm, tinggi meja: 1.000 mm, lebar total: 3.000 mm, gaya penekanan: 250 t, berat keseluruhan: 25.000 kg, MIB HYDRAULIC PRESS Bodpfx Ahjv Hbh Rewscw YEAR: 01/2000 CAPACITY: 250T MACHINE TO BE RECOMMISSIONED, COMPLETE

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 400 t, lebar meja: 2.000 mm, panjang meja: 1.000 mm, kecepatan operasi: 106 mm/dtk, kecepatan mundur: 125 mm/dtk, panjang langkah: 750 mm, kecepatan penekanan: 12 mm/dtk, Perlengkapan: penghadang cahaya keselamatan, HYDRAULIC C-FRAME PRESS FOR STRAIGHTENING RAILWAY TRACKS We are offering a new or rebuilt version of this press. The press will be available for sale by the customer in Q2-Q3 2026, as the project timeline has been extended. The hydraulic press CF-400E/NC is part of the CF/NC series and has been specifically developed for the straightening of railway rails. It is equipped with an upper and lower table made from machined C45E steel with DIN 650 T-slots. The press uses an optimized hydraulic system with a pressure of less than 255 bar, ensuring long service life and reliable performance. It meets all essential safety and health requirements as per CE regulations. TECHNICAL DATA Pressing force T 400 Motor power kW 22 Variable working speed mm/s 4-12 Approach speed mm/s 106 Return speed mm/s 125 Maximum pressure Bar 255 Stroke mm 750 Lower table mm 2,000 x 1,000 Ram plate mm 2,000 x 1,000 Maximum vertical clearance mm 1,000 Working height mm 960 Total height mm 3,560 + 600 Weight kg 39,500 STRUCTURE AND TABLE: • The C-frame is fully welded and made exclusively from S355JR steel. • Stabilized and machined after welding to ensure perfect parallelism and precision. • Calculated and designed using finite element analysis software. • The upper table ensures perfect alignment thanks to four lateral cylindrical guides (80 mm diameter) fitted with maintenance-free bimetallic bushings. CYLINDER AND HYDRAULIC UNIT • Main cylinder is single-acting, jacketed, with a chrome-plated piston and maintenance-free, wear-resistant guides. • Two side-mounted double-acting cylinders with chrome-plated pistons and wear-resistant guides allow rapid advance and return speeds. • Equipped with two independent hydraulic safety blocks. • Motorized hydraulic unit with pre-fill valve for advance and return. Constant power pump with variable flow rate. • Fitted with a directional valve, pressure relief valve, decompression valve, and an air-oil cooling system. Bcedpowkv A Nefx Ahwow • Glycerin manometer with tonnage indicator. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS safety PLC, model SIMATIC S7 1200, and a 7” touchscreen, model KTP-700 COMFORT, installed in the control cabinet. Allows programming of semi-automatic and automatic operating modes, output, stroke, and dwell time. Offers a storage capacity of 300 recipes, with each recipe allowing pre-programming of all parameters. • All electrical and hydraulic controls are redundant and self-monitored. Includes an additional safety block and built-in self-monitoring devices for controls and safety circuits. Includes verification and certification of correct functionality and safety distances for light curtains. • Operation via a low-voltage electric foot pedal. • For safety, the system is equipped with Category IV safety laser and workspace protection with light curtains.

Kondisi: bekas, berat muatan maksimum: 33.780 kg, berat keseluruhan: 39.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 10/2013, inspeksi berikutnya (TÜV): 01/2027, volume ruang muat: 24 m³, Perlengkapan: ABS,

Kondisi: bekas, berat muatan maksimum: 29.200 kg, berat keseluruhan: 35.000 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 07/2010, inspeksi berikutnya (TÜV): 04/2022, panjang ruang muatan: 7.300 mm, lebar ruang muat: 2.300 mm, tinggi ruang muatan: 1.400 mm, volume ruang muat: 24 m³, Perlengkapan: ABS,

Kondisi: bekas, jarak tempuh: 210.000 km, daya: 330 kW (448,67 hp), pendaftaran pertama: 05/2019, jenis bahan bakar: diesel, berat keseluruhan: 41.000 kg, konfigurasi gandar: 3 gardan, inspeksi berikutnya (TÜV): 03/2028, warna: hijau, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2019, Perlengkapan: ABS, pendingin udara,