Pusat permesinan

BIESSE ROVER A 3.30

Tahun pembuatan: 2008, Kondisi: diremaj di bengkel (bekas), nomor mesin/kendaraan: 22589, MC dengan meja melintang Model: Rover A3 30 Redpfjlu Hhcex Ad Rsr Tahun: 2008 4 sumbu Area kerja: x=3060 mm y=1260 mm z=150 mm 6 balok kerja L = 1200 tersedia pada Agustus 2023 Perkakas tidak termasuk

Kondisi: bekas, Tahun pembuatan: 2002, Turning diameter: 820 mm Turning length: 2,000 mm Control: SIN 810 D Centre height over flat bed: 400 mm Swing diameter over cross slide: 500 mm X-axis travel: 540 mm Z-axis travel: 2,100 mm Feed rate X/Z-axis: 0.01 - 50 mm/min Rapid traverse X-axis: 5.00 m/min Rapid traverse Z-axis: 10.00 m/min Feed force, facing: 12,500 N Feed force, longitudinal: 20,000 N Spindle speeds: 6.4 - 1,600 rpm Spindle speed, gear stage 1: 6.40 - 376 rpm Spindle speed, gear stage 2: 27.40 - 1,600 rpm Drive power at 60% / 100% duty cycle: 46.00 / 37.00 kW Torque at 60% / 100% duty cycle: 5,073 / 4,069 Nm Constant cutting speed: 1 - 9,999 m/min Spindle nose according to DIN 55027 - Size 11 Spindle diameter at front bearing: 170 mm Spindle bore: 128 mm Tailstock quill taper: MK 6 Rodpfow Dvipjx Ad Rjr Quill diameter: 125 mm Quill stroke: 280 mm Thread pitch: 0.1 - 400 mm Total power requirement: 35.00 kW Machine weight: approx. 11.00 t Space requirements: approx. 6.00 x 3.00 x H2.60 m Equipment: SIEMENS Sinumerik 810D control, chip conveyor, tailstock, extraction unit, 2 steadies included. Spindle bearings overhauled by OEM 04/2023 Machine can be inspected under power.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, daya: 160 kW (217,54 hp), tegangan masuk: 380 V, masa garansi: 12 bulan, tahun perombakan terakhir: 2023, Perlengkapan: dokumentasi / manual, 1 Pellet press brand: Buhler DPAB Die inner diameter: 660 mm Die running surface: 138 mm Press is equipped with 1 motor, 160 KW. Press door is made of stainless steel and features an overload flap in the door. 2-roller pellet press with 2 rollers on the press, overhauled in either a dimpled or grooved design. Press is complete with die lifting device and tools included. The press has been fully refurbished and fitted with new bearings and wear parts, such as front and rear scrapers, die retaining ring, etc. Also fitted with new V-belts. All safety requirements will be observed and suitable switches for Rjdpfx Adorah Eve Rjr friction protection, door safety switch, and inspection hatches will be installed.

Kondisi: bekas, Achse X 30,0 in 762 mm Achse Y 16,0 in 406 mm Achse Z 16,0 in 406 mm Zur Inspektion bereit Bereit zur Auslieferung Rsdpfoiypzdsx Ad Rjr

Kondisi: bekas, Tahun pembuatan: 2017, Direct numerical control (NC HOPS) with Campus software Working area X-axis: 3400 mm Working area Y-axis: 1600 mm Working area Z-axis: 300 mm Worktable with 6 adjustable rails Equipped with 3 suction cups per rail for holding the workpiece 1 electrospindle with 5 axes, 10 kW, with automatic tool changer, cone type HSK F63 Rodowwiybspfx Ad Rer Drilling head with 24 spindles as follows: - 12 vertical spindles (Y-axis) - 6 vertical spindles (X-axis) - 4 horizontal spindles (Y-axis) - 2 horizontal spindles (X-axis) Automatic tool change system with 18 positions – located at the rear of the machine Front guarding and safety system with mats and safety fences Automatic lubrication system Air conditioning unit for the control cabinet 1 vacuum pump

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, I am selling a vertical throughfeed CNC machining center Vitap Point K2 2.0, year of manufacture 2019. Configuration: - 1 pc. milling spindle, 5.0 kW - 12 + 4 + 4 pcs. drilling spindles - 1 pc. grooving saw Return system: draws the elements back to the operator or discharges them to the rear as a throughfeed machine. Element max. size: x 1250 x 50 mm Element min. size: 270/400 x 185 x 4 mm Overall dimensions: 2900 x 1650 mm Total weight: 950 kg Supplied with full documentation and CE certificate. Very good condition. Immediately available. Rodpfx Adjvx Dz Do Rer

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: CDE:D09C236, CORIS / HERMES 9600 płuczka i linia napełniająca do fiolek, wyprodukowana we Francji. W skład zestawu wchodzą: Rjdpfortnlajx Ad Rjr - maszyna do wydmuchiwania butelek, z 2 formatami (60 ml i 30 ml), - maszyna napełniająca HERMES 2009 z 2 pierścieniami napędowymi po 10 gniazd, - podajnik nakrętek, - przepływ laminarny, - części zamienne, - przenośnik taśmowy 2200 mm x 40 mm, sprzedawane bez pompy perystaltycznej. Rok produkcji: 2010 STAN BARDZO DOBRY

Tahun pembuatan: 1997, Kondisi: baik (bekas), • Working width (mm): 1300 • CSD system Rsdpfx Adoidi Ivo Rjr • Cross-belt sanding unit • Longitudinal sanding unit – shoe • Brushing unit • Ionization

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2025, Diese 3-Achs QUICK CNC UE-481 wurde 2025 hergestellt. Sie verfügt über einen Arbeitsbereich von 1300 x 2500 x 200 mm, eine 9 kW Hochleistungsspindel sowie einen linearen Werkzeugwechsler. Der Vakuumtisch ist in 6 Zonen unterteilt und wird durch eine Becker Vakuumpumpe mit 250 m³/h unterstützt. Die Maschine ist mit einem 3-seitigen Sicherheitszaun inklusive Frontlichtschranke, Werkzeugen und einer Absauganlage ausgestattet. Wenn Sie hochwertige CNC-Frästechnik suchen, ist die von uns angebotene QUICK CNC UE-481 eine ausgezeichnete Wahl. Kontaktieren Sie uns für weitere Informationen. Rsdjx D Dnqopfx Ad Ror Anwendungsbereiche CNC-Holzbearbeitung

Kondisi: sangat baik (bekas), Three-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Movable horizontal table (workpiece), stationary working head Control (BiesseWorks software), with separate electrical and control panel Working head safety enclosure, safety tread mats Entry support table (workpiece support) No. 2 workpiece clamping vices within the working area Exit table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm 3000 x 1300 x 60 (approx.) Total connected load (kW) 24 WORKING UNITS (TOP): Independent vertical drilling spindles No. 29 Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW) WORKING UNITS (BOTTOM): Independent vertical drilling spindles No. 29 Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW) Rodpowb Allofx Ad Rsr