Suku cadang mesin edge banding.

Scm Bordatrici, Squadraborda, Squadratrici

Kondisi: bekas, Tahun pembuatan: 2022, Mesin dalam kondisi sempurna di bengkel kecil yang bergerak di bidang pengerjaan kayu. Knedjy S U Duopfx Ankjc

Kondisi: seperti baru (mesin pameran), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE. The line consists of the following machines: VZ0200A) Infeed station with double loading unit “BARGSTEDT” Model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge-banding machine “HOMAG” Model KFL 525/8/A3/15 VZ0200C) Turnover station (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge-banding machine “HOMAG” Model KFL 526/10/A3/30 VZ0200E) Turnover station (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDL 510/25/12 VZ0200F) Sword brush “WANDRES” Kedpfxedt Rgvs Ankonc VZ0200G) Stacking station with double buffer unit “BARGSTEDT” Model TSP 410/D/25/12

Kondisi: baru, Tahun pembuatan: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Jointing unit Whispercut Corner rounding unit radius: R = 2 mm Quick-change system for corner rounding Corner rounding motor with radius: R = 1 mm Multi-radius scraper (R1/R2) Chassis Knsdpfsg Tu Rkox Ankjc Release agent spray unit Cleaning agent spray unit Edge protection spray Nesting Pneumatic 3-point adjustment Multifunctional milling unit (R2/R1/Chamfer) Equipment for short workpieces

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, daya: 5 kW (6,80 hp), ketinggian potong (maks.): 200 mm, lebar pemotongan (maks.): 1.300 mm, diameter mata gergaji: 550 mm, panjang pemotongan (maks.): 3.200 mm, lebar potong di pagar rip: 1.300 mm, panjang meja geser: 3.200 mm, Exhibition machine F 45 Elmo Drive - Tilting +/- 45° - Cutting height 200 mm - Scoring unit preparation No. M24038 - Double roller carriage with 3200 mm - Mitre angle stop 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Template holder - On/off switch on the double roller carriage - Front support roller Ksdouh R R Espfx Ankonc

Kondisi: bekas, Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 2.200 kg, Spitzenweite 1200 mm Drehzahl A) 70 - 380 U/min. Drehzahl B) 380 - 2000 U/min Gewicht 2,2 t Drechselbank +++++ Bitte beachten Sie, dass die Maschine im demontierten und verladebereiten Zustand ist. Aus diesem Grund ist eine Vorführung unter Strom oder die Knodpfxok Sat Ds Anksc Fertigung eines Videos nicht möglich. Darüber hinaus enthält unsere Anzeige die aussagefähigsten Fotos von bestmöglicher Qualität. Die Zusendung weiterer Bilder ist leider nicht möglich. +++++

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Mesin Edgebander BIESSE Akron 1440A Kjdpfxoyh A I Ae Anksnc Ketersediaan: April/Mei 2026 Sertifikat CE Tahun produksi: 2017 Mesin dapat diperiksa sebelum pembelian

Kondisi: bekas, nomor mesin/kendaraan: 008350, Jenis tepi yang dipasang: tepi tipis, tepi tebal, kayu solid Sistem perekat: PUR, udara panas Pemotongan alur sambungan: ya Unit multifungsi: ya Kecepatan umpan maksimum: 20 m/menit Ketebalan papan maksimum: 60 mm Unit kerja: 7 unit Knjdpfxjx A Tgys Ankoc

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8153336470, berat keseluruhan: 616 kg, laju aliran volumetrik: 399 m³/jam, tekanan (min.): 4 batang, tekanan (maks.): 13 batang, tingkat kebisingan: 67 dB, jenis pendinginan: udara, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, We are a company specializing in the compressed air industry for over 20 years. Our professional service level and the high-quality products we offer—market-proven—guarantee a successful partnership with you. We offer a NEW Atlas Copco GA37VSDs FF rotary screw compressor (variable speed drive, with integrated dryer). This machine is equipped with a frequency inverter (VSD), built with the latest technologies, which translates into greater efficiency and performance: - On average, 20% lower specific energy consumption (SER) than previous GA VSD series models. - The eco-friendly and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models operating on idle. - Additionally, performance increase (FAD) of up to 12% regardless of energy savings. - Efficient fan motor (ERP 2015 compliant) reduces energy usage and noise level. - The highest efficiency iPM motor (up to 94.5%), exceeding IE3 efficiency levels. Built to work hard for your success. Kodpfxewlp Hds Ankonc The GA series oil-injected rotary screw compressors provide market-leading efficiency, high productivity, and low maintenance costs—even under the toughest conditions. Technical Data: - Capacity at 4 bar: 15.69–13.75 l/s / 0.94–7.85 m3/min - Capacity at 7 bar: 15.67–129.35 l/s / 0.94–7.76 m3/min - Capacity at 10 bar: 15.68–110.79 l/s / 0.94–6.65 m3/min - Max pressure: 10 bar (13 bar version available on request) - Voltage: 400 V - Motor: 37 kW - Noise: 67 dB(A) - Weight: 616 kg - Motor with internal permanent magnets (iPM) - Compression element - Direct drive - Innovative fan - Durable oil separator/filter - Electronic condensate drain with zero compressed air loss - Elektronikon controller - Inlet valve - VSDs module - OEM code: 8153336470 If you are unsure whether this machine is suitable for you, or can’t find the right compressor, CALL US! We can advise you on choosing the right equipment. Feel free to check out our full product range.

Kondisi: baru, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel unit 2 combination unit with pad Pad pneumatically pressed Abrasive belt dimension: 970 x 2150 mm Total power of two sanding units: 11 kW Feed belt speed (inverter-controlled): 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Diameter of sanding rollers: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the abrasive belt without the use of compressed air (ECO GEAR SYSTEM) Infinitely variable feed belt speed via inverter: 4-20 m/min Ksdpsg A D Ansfx Ankonc Automatic star-delta starter Steel roller on the first unit, rubber-coated roller on the combination unit Electronic table height display Automatic material thickness sensor and table positioning system Safety switches Automatic machine switches Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application for straight workpieces (EVA/PUR glue pot with drainage function optional), 2-motor high-frequency end trimming station, HF combination milling unit, corner copying unit, chain feed system, motorized top pressure with encoder and double ball bearing pressure rollers, extendable workpiece support rail, signal lamp for workpiece sequence, integrated section control for contactless operation of machining functions, as well as L-Motion control (6 axes). Suitable for ABS, PVC, melamine, and thick wood veneer edge banding tapes, as well as fixed lengths of 0.4 – 3.0/6.0 mm and workpiece heights from 10 to 60 mm. Knjdjl Rix Ejpfx Ankec • Two counter-rotating, operation-controlled pre-milling units with diamond-tipped spiral milling cutters ensure clean and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the pot). Fine, adjustable adhesive application via glue roller, separate temperature setting for the glue roller, electronic temperature control with automatic standby function (prevents glue burning if the machine is unused for extended periods while still powered on). Optional: EVA/PUR glue pot with drain/cleaning function for quick color changes Optional: Quick-change glue pot system • Pressure section consisting of a driven pressure roller synchronized with the glue applicator roller and two smaller, oppositely conical, spring-loaded pressure rollers ensures optimal joining of the edge material with the workpiece. Motorized adjustment of the pressure zone (1x L-Motion) • High-frequency end trimming saw with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades. Pneumatically tiltable from the operator panel. • High-frequency combination milling station: 2 powerful 0.55 kW HF motors with HM-WPL special cutters. Motorized adjustment of the milling station (4x L-Motion) • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge banding; not recommended for soft and postforming profiles. Option for single-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1x L-Motion) • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module • Standard equipment includes LED lighting and LED-Motion system • Optional: Motorized infeed fence adjustable from the control panel (1x L-Motion) Optional finishing units (3 free slots): -Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder. The operator panel allows pneumatic switching between radius R1 and R2. -Flat scraper unit: Removes glue residues from the workpiece surface at the glue joint with a lightly pulling cut, pneumatic ON/OFF control via air cylinder -Polishing unit: 2 motors 0.09 kW, 1,500 rpm ensure an excellent finish