Mesin bor

SCM Cyflex H800

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, I am selling a vertical throughfeed CNC machining center Vitap Point K2 2.0, year of manufacture 2019. Kdjdpfxovx Dz Dj Ag Rei Configuration: - 1 pc. milling spindle, 5.0 kW - 12 + 4 + 4 pcs. drilling spindles - 1 pc. grooving saw Return system: draws the elements back to the operator or discharges them to the rear as a throughfeed machine. Element max. size: x 1250 x 50 mm Element min. size: 270/400 x 185 x 4 mm Overall dimensions: 2900 x 1650 mm Total weight: 950 kg Supplied with full documentation and CE certificate. Very good condition. Immediately available.

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 1999, Fungsionalitas: tidak berfungsi, Mesin prisma Storti 4x35 HP Masuk rol Keluaran Kdodpfolxqk Rsx Ag Rsi Kabinet kontrol Mesin untuk restorasi

Kondisi: sangat baik (bekas), VK450 2RE log debarker. Equipped with two rotors. One is a stump grinder rotor. The other is a debarking rotor. Minimum-maximum log diameter: 8-45 cm. Minimum log length: 3 m. Comes complete with original VK centering conveyor. Will be sold after complete overhaul. Kedpfx Agoulv Hzo Rjdi

Tahun pembuatan: 1993, Kondisi: bekas, • Working width (mm): 2200 Kjdpen I Twyefx Ag Rsdi • Motor power (kW): 22 • Upper rollers: with PU rings • Lower rollers: corded • Saw shaft: included

Kondisi: baik (bekas), Tahun pembuatan: 1994, 2-sided planer, top and bottom Constant table height (always consistent feed height) Max. planing width: 600 mm Max. planing height: 280 mm Ksdpfjhuthyjx Ag Rodi Cutterheads with strip knives Immediately ready for operation

Kondisi: bekas, Tahun pembuatan: 2008, Used machine Year of manufacture: 2008 Edge Control system with 18.5" touchscreen color display 16:9 Swiveling control panel Program memory Motorized pressure bridge adjustment Feed via transport chain Feed rate: 8-18 m/min Extendable workpiece support Motorized adjustable infeed fence Jointing unit 1961 Diamond jointing cutter for climb and counter-rotation Automatic adjustment to workpiece height Edge feeding unit 1903 Pre-trimming up to 3 x 45 mm (material dependent) 1905 Multi-System glue application system Automatic glue height adjustment with sensor nozzle Pressure regulator for adjusting cartridge pressure PUR adhesives can be used Pressing unit 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable Multi-function unit 1824 MOT 4 with multi-profile cutter, profiles 1,2,3 mm Corner copier unit 1832 Corner copying function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers and pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper Flat scraper 1964 for removing glue residue for a clean glue joint With extraction hoods Spray unit 1856 for infeed and outfeed zone Buffing unit 1940 for finishing and edge polishing Kdsdpfx Aev Sv Enjg Rei ----- Technical Data ----- Edge thickness, coil material: 3 mm Edge thickness, strip material: 8 mm Max edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8-18 m/min Distance to workpiece support: 470 mm Support plate diameter for edge material: 800 mm Cutting knife for coil material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.35 kW Corner copying power: 0.22 kW Extraction port, jointing unit: 120 mm Extraction port, milling unit: 70 mm Extraction port, scraper unit: 70 mm Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Photo of operating hours taken in 2022 Availability: short-term Location: Röllbach

Kondisi: baik (bekas), BRANDT Highflex 1440 Edgebander Well-equipped, available for inspection before purchase. Pre-milling cutters Glue application Pneumatic pre-cut guillotine Pressure rollers Finishing saws Top and bottom pre-milling unit 2 x multi-function milling units Profile scraper Flat scraper Polishing unit The machine features NC control for the milling units and a pneumatic package. Max workpiece height: 60mm Kdjdpfx Agjt Hxxpj Rsi Max edge tape thickness (coil): 3mm Feed speed max: 14m/min Well-maintained machine, in very good condition.

Kondisi: baik (bekas), Tahun pembuatan: 2019, CNC through-feed machining center with dual clamp drive in X-direction and portal design in Y-direction. The second gripper allows for trimming up to 15 mm, as well as continuous milling movement in the X-direction. The workpiece length (X-direction) is measured using a sensor. Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, max. 24,000 rpm 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Kjdpfexrahcsx Ag Rodi Single pick-up station for ergonomic loading or unloading of tools into the machine. Can also be used as an additional tool position for 11 virtual tools. Automatic tool length measurement system in Z-direction Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables front and rear, foldable Machine software WOODFLASH with - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workplace license Dongle upgrade 3D simulator with collision checking for WOODFLASH on the machine Workpiece release at the rear of the machine Machine supplied without tools and HSK adapters

Kondisi: bekas, Tahun pembuatan: 2020, tinggi total: 2.100 mm, panjang total: 2.000 mm, lebar total: 2.500 mm, Price: On request - Machine available from: 2025-12-15 - Year of manufacture: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate available: No - Serial number: 1000040377 - Main motor power [kW]: 10 - Number of controlled axes [pcs.]: 3 - Working area X [mm]: 975 - Working area Y [mm]: 1321 - Working area Z [mm]: 243 - Number of milling spindles [pcs.]: 1 - Tool holder interface: ISO30 - Spindle diameter [mm]: 16 Kdodpfx Aox Ad R Nog Rsi - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 18000 - Horizontal boring machine: Yes - Horizontal boring spindles [pcs.]: 10 - Vertical boring machine: Yes - Software: Biesse works - Saw unit present: Yes - Safety device: - Spindle speed control: variable - Voltage [V]: 400 - Power consumption [A]: 18 - Fuse [A]: 32 - Power [kW]: 10.0 - Transport dimensions: 2000mm x 2500mm x 2100mm (L x W x H) - Number of transport packages [pcs.]: 2 Financial information Value added tax: The indicated price is plus VAT VAT/margin taxation: VAT is deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Glenn Smeets

Kondisi: sangat baik (bekas), Maggi Boring System 35 Multi-Spindle Boring Machine Number of spindles: 35 Spindle pitch: 32 mm Distance between first and last spindle: 1088 mm Maximum drilling depth: 85 mm Spindle speed: 2800 rpm Number of pneumatic clamps: 4 Operating pressure: 6–8 bar Kdsdpfxjvx Aqds Ag Rji Air consumption per cycle: 15 l Number of motors: 2 × 1.5 kW Weight: 450 kg CE certificate