Mesin pemotong plat

SCM Gabbiani P80

Kondisi: bekas, Tahun pembuatan: 2023, Exhibition Machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Model: GABBIANI P80 Year of manufacture: 2023 1.00 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm: 80 Working table height mm: 950 Number of standard clamps: 5 Number of clamps for versions 33/38/43: 9 / 10 / 10 Number of clamps for versions 33/38/43 with FlexCut 1 unit (single clamp with double fingers included): 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm: 3300x2100 Version 33 (Opt.) mm: 3300x3200 Version 38 mm: 3800x3200 Version 38 (Opt.) mm: 3800x3800 Version 43 mm: 4300x3200 Version 43 (Opt.) mm: 4300x4300 AXIS SPEEDS Variable saw carriage speed m/min: 6 – 60 Variable pusher speed ( ) m/min: 60 MAIN SAW BLADE Motor power (S6 -40%) - 50Hz (star-delta start) kW (HP): 7 (9) (11) Rotation speed – 50Hz rpm: 4650 Saw blade diameter mm: 340 Main saw blade shaft diameter mm: 80 SCORING SAW Motor power (S6 -40%) - 50Hz kW (HP): 1.5 (2) Rotation speed – 50Hz rpm: 5850 Scoring blade diameter mm: 200 Scoring saw spindle diameter mm: 80 INSTALLATION Installed power kW: 12÷15 Machine base voltage Euro voltage (400 V / 50 Hz) Compressed air requirement NL/min: 300 Required air pressure bar: 7 Extraction air requirement m³/h: 2440 Extraction air speed m/sec: 20 Extraction spigot diameter mm: 4x120 ( ) Note: For countries where EC standards apply, the forward feed speed of the pusher is limited to 25 m/min. GENERAL CHARACTERISTICSAutomatically controlled horizontal panel saw with PC/PLC control unit, for cutting panels of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame constructed as steel tube design - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal fence on the left sideSaw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring blade - Vertical lift of the saw blade on linear ball guides and shoes - Guide wheels made of hardened and ground steel - Balanced mass distribution for best cutting quality - Direction of travel against the longitudinal fence - Saw carriage drive via rack and pinion - Carriage runs on cylindrical guides - Cylindrical guides made of hardened and ground steel (5 years warranty), protected by special dust wipers - Pneumatic switch for fast and safe change of main saw blade and scoring bladePressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to avoid collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam for cleaning the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Slides on linear ball guides and shoes.* Travel: 1200 mm* Minimum working width: 60 mm* Maximum working width: 1200 mmPositioning pusher and rear section of the machine - Positioning pusher over the entire length with motor drive via a robust shaft. Positioning pusher... Hsdpfxox Twcve Abyon

Kondisi: sangat baik (bekas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.4 / 3 Edge thickness in strips (min/max) mm 0.4 / 8 (12)* Panel thickness (min/max) mm 8 / 60 Control system "StarTouch" + "Touch 7" Feed speed m/min 12-18 Pressure belt driven (C.N.) Spraying unit (for liquid anti-adhesive) AAR Adjustable stop ruler, C.N. controlled "EASY SIZE PLUS" Jointing unit 2 x Kw Radiator for edge warming Gluing unit (P.U.R. glue + pre-melter) "VC/800" - "VC/6" + "AirFusion AF15" Edge pressure zone (C.N.-controlled) Edge magazine for rolls - 1 Cut-off unit K/SEL Pre-milling unit RS/K Milling unit RI/800 (3 pos.) Multi-function unit (radius and profile milling unit) "4 EDGE" KIT Spraying units (for sliding fluid) Profile scraper unit RAS/1000 Flat scraper unit RCA/2C Universal milling unit for grooving/rebating and profiling K-100 (1 x Kw 1.8) 90° Hjdpoxlqntefx Abyon Hot air radiator - edge trimmer Return direction "SAG" Mod. SPINNER 47 / 63

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Sale on behalf of customer. SCM Gabbiani P80 Panel Saw – Year of manufacture 2021 – 4300 x 4300 mm For sale is a state-of-the-art SCM Gabbiani P80 panel sizing saw from 2021, in very well-maintained condition. The machine has been used in ongoing joinery operations and impresses with its precision, speed, and high reliability during daily use. Technical Data: Cutting length: 4300 mm Cutting width: 4300 mm (large version) Cutting height / blade projection: 80 mm Main saw blade diameter: Ø 340 – 370 mm Scoring saw blade diameter: Ø 200 mm Main saw blade speed: approx. 4,650 rpm Scoring unit speed: approx. 5,850 rpm Drive & Power: Main motor: approx. 7.5 – 15 kW (depending on version) Scoring unit: approx. 1.3 – 1.5 kW Total connected load: approx. 12 – 15 kW Voltage: 400 V / 50 Hz Speeds: Saw carriage: 6 – 60 m/min (infinitely variable) Pusher speed: up to 60 m/min Pneumatics & Extraction: Compressed air requirement: approx. 300 NL/min / 7 bar Extraction capacity: approx. 2,200 – 2,400 m³/h Extraction connections: 4 x 120 mm Equipment & Features: Air cushion tables for easy handling of large panels Floating clamps for precise cutting Scoring unit for chip-free cuts PC/PLC control (Maestro system possible) Rugged industrial design for high utilization High repeat accuracy and cutting quality Material Application: Suitable for: - Chipboard - MDF / HDF Hsdpfjylp S Eox Abyjn - Multiplex / plywood - Coated panel materials The machine is fully functional and ready for operation. Viewing possible at any time by appointment. Location: Germany If interested, please feel free to contact us – further pictures, videos, or details are available upon request. Dismantling and delivery available for an extra charge.

Kondisi: bekas, Tahun pembuatan: 2026, jam operasional: 15 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 204065, Used machine: CNC cutter/plotter. Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system using CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a driven rotary knife, electrically oscillating knife, and a milling cutter (including suction device) • Multifunctional tool head for up to 2 interchangeable tools • Powerful vacuum blower for material fixation • Standard with grey conveyor table. Green-blue exchange conveyor possible (offers high contrast for dark materials) Additional tools optional (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal cutting tool (drag knife) • KCT kiss-cut tool • CTT creasing tool • V-Cut angle-cutting knife Hedpfx Aboif Ek Rjyon • Printer registration mark detection • Camera registration • Punching tool for notches or holes • Milling spindle with suction device User-friendly: • Easy tool exchange, "PLUG & CUT" • Intuitive user interface • Simple blade change • Vacuum zones activated by click Quick payback: • Low cost with high added value • Optimal material utilization through "nest expert" software modules (not included) • High speed • Consistent precision Technical Data: • Short cutting times thanks to high positioning speeds up to 90 m/min • Repeatability +/- 0.25 mm • Cuts single or multiple layers • Suitable for sheet and roll materials (can be extended with matching unwinder) • Quick ROI (Product photo as example) The machine is CE certified.

Tahun pembuatan: 2006, Kondisi: hampir baru (bekas), Contenitore con volume di 32 m³ Hodpfx Abofhb Tkoyon

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, daya: 8 kW (10,88 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, Perlengkapan: dokumentasi / manual, OPTIMAT BHX055 Hedpfx Asyvh Dpobyen

Tahun pembuatan: 2023, Kondisi: baru, lt- Tik pasiūlymai klientams iš Baltijos šalių: Lietuva, Latvija, Estija. Hodpfx Aboixz D Ueyen Guillotine RAPIDO – tai greitas ir patikimas kirpimo (giljotininis) presas. Priklausomai nuo lakšto ilgio, siūlomos giljotinos su skirtingais darbiniais ilgiais: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Įrenginys gali atlikti iki 35 pjūvių per minutę. Pavaros sistema su ekscentrikais, stūmoklinėmis traukėmis ir presavimo atrama, kurią galima nustatyti vos 2,5 cm nuo peilių, leidžia lengvai ir greitai apipjauti siauras juostas. RAPIDO giljotininis presas komplektuojamas su atraminėmis liniuotėmis iš abiejų pusių ir LED pjovimo linijos apšvietimu. Galimi darbiniai ilgiai: 2600 mm / 3200 mm / 4100 mm lv- Piedāvājums tikai klientiem no Baltijas valstīm: Lietuva, Latvija, Igaunija. Guillotine RAPIDO ir ātra un uzticama šķērsgriezēja giljotīna. Atkarībā no lokšņu garuma ir pieejamas giljotīnas ar dažādu darba garumu: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Iekārta var veikt līdz 35 griezumiem minūtē. Piedziņas sistēma ar ekscentriem, nospiešanas stieņiem un noturēšanas mehānismu, ko iespējams novietot līdz 2,5 cm tuvumā no asmeņiem, ļauj viegli un ātri apgriezt šauras lokšņu strēmeles. RAPIDO giljotīnas šķērsgriezējs aprīkots ar paralēlām lineālēm abās pusēs un LED griešanas līnijas apgaismojumu. Pieejamie darba garumi: 2600 mm / 3200 mm / 4100 mm et- Pakkumised ainult Balti riikide klientidele: Leedu, Läti, Eesti. Guillotine RAPIDO on kiire ja usaldusväärne lõikamismasin. Sõltuvalt lehtmaterjali pikkusest on saadaval giljotiinid erineva töölaiusega: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Masin suudab teha kuni 35 lõiget minutis. Ajamisüsteem koos ekstsentrikute, tõmbevarraste ja hoidursüsteemiga, mida on võimalik asetada kuni 2,5 cm kaugusele teradest, võimaldab hõlpsalt ja kiiresti kitsaste ribade kärpimist. RAPIDO giljotiinlõikur on varustatud mõlemal küljel paiknevate ristjoone lattidega ja LED-lõikeliini valgustusega. Saadaval töölaiused: 2600 mm / 3200 mm / 4100 mm

Kondisi: diremajakan ulang (bekas), VERSCHIEDENE MOTORENTYPEN UND SCHLITTEN FÜR CELASCHI DET GEBRAUCHT, KOMPLETT GENERALÜBERHOLT Hodpfx Abedvlcyjyen

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: HBC 140 2x75kW 2001 (210-008-01), gaya penekanan: 155 t, berat bal: 1.500 kg, tekanan: 250 batang, daya: 150 kW (203,94 hp), tahun perombakan terakhir: 2024, Perlengkapan: dokumentasi / manual, Verkocht door Bollegraaf Recycling Solutions, de oorspronkelijke fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Balenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststof ventiel Anti-rattenbekabeling 0 uur na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de 'Bollegraaf OEM Gecertificeerde Revisiestandaarden'. Dit bevat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de daadwerkelijke revisie plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na de demontage worden de toleranties van alle stalen componenten gemeten en waar nodig opnieuw gelast. Dit geldt in ieder geval voor de volgende onderdelen: • Persplunjer • Frame • Kanaal • Voordruk-klep Na demontage en inspectie wordt de persplunjer opnieuw opgelast en voorzien van nieuwe plunjerwielen. De beschermroosters en de voordruk-klep worden uitgedeukt en waar nodig gerepareerd. Opnieuw gespoten Hedpfjtvau Ajx Abysn Na het meten van de toleranties en eventueel las- en herstelwerk worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydraulische leidingen en slangen worden vervangen. De hydraulische componenten worden gereviseerd. De hydraulische olie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitdozen worden vervangen en teruggeplaatst op eenvoudig toegankelijke posities. Slijtagedelen: Alle slijtagedelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtagedelen van (beide) naaldinstallaties en knopers worden vervangen. Cilinders: De cilinders worden gereviseerd en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC Kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vernieuwd. De PLC en HMI (‘human interface’) worden vervangen door de nieuwste Schneider M340-versie inclusief de nieuwste software.

Kondisi: baru, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" configuration - Control console "eye-S" (control panel) - Human-Machine Interface software (HMI) "Maestro active edge" - Fine trimming and radius scraper unit, radius = 1 mm - Fine trimming and radius scraper unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer at the infeed fence - "SAVENERGY" kit - Interior lighting for the cabin and edging area Hedpfx Ajwkf Ihjbysn - "Nesting" tracing rollers - Release agent spray unit "AAR" 1 - Edge finishing spray unit - Spray device for sensitive edges - Jointing unit "RT-V1" - "EASY SIZE" device - Glue application unit "VC-VM" - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - End trimming unit "K-2 Radius" - Bevel and radius trimming unit "R-HP Multiedge 2R" - Corner rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit, automatic straight/R/R positioning, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Surface scraper "RC-N" - Buffing unit "SP-V" The machine is brand new and still in its original packaging. Promotional machine offered at a special price.