Bander tepi (Edge bander)
SCM olimpic k 360

EXW harga tetap ditambah PPN

€26.500

Tahun pembuatan

2017

Kondisi

Bekas

Lokasi

Saint-Nicolas-de-Redon Prancis

Bander tepi (Edge bander) SCM olimpic k 360

Data mesin

Nama mesin:: Bander tepi (Edge bander)

Pabrikan:: SCM

Model:: olimpic k 360

Tahun pembuatan:: 2017

Kondisi:: baik (bekas)

Harga & Lokasi

EXW harga tetap ditambah PPN

€26.500

Lokasi:: RUE DES PINS 2, 44460 SAINT NICOLAS DE REDON, France

Hubungi

Rincian penawaran

ID iklan:: A15333196

Pembaruan:: terakhir pada 10.06.2026

Deskripsi

NUMERICALLY CONTROLLED EDGE BANDER WITH EDGE TRIMMER (SPINDLES) & CORNER ROUNDING UNIT

Brand: SCM
Model: K 360 HP-T-ER1 Serial No.: AH/120944
Ref: 123304 Year: 2017

MACHINING CAPACITIES:
- Panel height to be processed: 8 - 58 mm
Thickness: 10 to 45 mm when using the corner rounder
- Panel length to be edged: 210 to 2500 mm
- Minimum panel width to be processed: 90 to 1100 mm
- Edge tape thickness (in coils): 0.4 - 3 mm without corner rounding, max 3 mm when using the corner rounder
- Edge strip thickness (in strips): max 6 mm without corner rounding, max 3 mm with the corner rounder
- Edge width: panel thickness + 2 mm on each side
- Feed drive (feed speed): 11 m/min
- Minimum panel distance: 600 mm
- Panel overhang relative to transfer chain (panel projection): 30 mm

MACHINE CONFIGURATION:
- StarTouch control panel
- Pre-set for barcode reader
- Unwinding plate Ø800 mm
- Frontal extension table
- Easy Size: digital positioning of entry fence and panel height
- Anti-adhesive spray unit
- Edge trimmer (Rectifier RT-V) 12,000 rpm
- Infrared panel pre-heating at entry
- Gluing unit (VC-VM) with interchangeable glue pot
for granulate, 1 kg capacity. Warm-up time: 12 minutes
Pneumatic pre-cut guillotine
Digitally positioned pressure unit (press) with 3 rollers,
including 1 motorized and timed roller
- End trimming unit, tiltable 0-20°, 12,000 rpm
- Top/bottom flush trimming unit, digitally positioned
with copying system. 1/4 radius 2 mm cutter (or bevel) 12,000 rpm
- Corner rounding unit R2mm 12,000 rpm, digitally positioned
- Top/bottom radius scrapers R1&2 mm, digitally positioned
- Top/bottom straight scrapers
- Edge finishing spray device (Nebulizer)

ADDITIONAL CHARACTERISTICS:
- Trimmer motors: 2x2 kW
- Saw motors: 2x0.19 kW
- Height adjustment motor: 0.30 kW
- Feed drive motor: 1.1 kW
- Flush trimming (milling) motors: 2x0.65 kW
- CE marking
- Lockable contactor, emergency stop buttons
- Main power supply: 380V, 3-phase, 50 Hz
- Pneumatic supply: 8-10 bar (max), dry air
- Extraction: 1x Ø100 mm and 5x Ø80 mm
Trimmers: 780 m³/h, Flush trimmers: 360 m³/h, Scrapers: 2x360 m³/h

Maximum operational footprint:
10.80 x 2.40 m

Bjdpfx Ajrx S Ipsd Rslk
Transport dimensions (LxWxH):
4.85 x 1.20 x 1.70 m

Weight: 1568 kg

Machine supplied with mounted tooling, manual, spare parts list, and schematics.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2019

19 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+33 2 99 ... iklan

Faks:

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

SCM Olimpic K360 T-ER1 SCM Olimpic K360 T-ER1

Polandia

11.248 km

SCM Olimpic K360 T-ER1
SCMOlimpic K360 T-ER1

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, Mesin pelapis tepi, tahun pembuatan 2017. SCM Olimpic K360 T-ER1 ini memiliki kecepatan umpan 11 m/menit dan dirancang untuk ketebalan tepi antara 0,4 hingga 6 mm. Mesin ini dilengkapi dengan unit pemotong tepi awal dengan kepala berlian yang berputar berlawanan arah, unit perekat EVA, dan unit pemoles. Jika Anda mencari solusi pelapisan tepi berkualitas tinggi, pertimbangkan mesin SCM Olimpic K360 T-ER1 yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Kecepatan umpan: 11 m/menit • Ketebalan tepi: 0,4–6 mm • Ketebalan papan: 8–60 mm • Ukuran benda kerja minimum: 140 x 90 mm • Catu daya: 400 V / 3~ / 50 Hz, 23 A • Fitur: • Pemotong tepi awal: 2 kepala berlian yang berputar berlawanan arah (hingga 3 mm kedalaman pemotongan) • Unit perekat EVA • Zona penekan dengan rol penggerak + 2 rol penekan • Unit pemotong akhir K-2 (lurus/miring, peralihan otomatis) • Pemotongan atas/bawah: rata, radius, chamfer • Pembulatan sudut R1/R2 • Pengikis profil dan datar • Unit pemoles Bljdpfszmgviox Ad Rjk • Sistem cairan anti lengket (2 cairan) • Pengumpan rol tepi

Lihat detail

Iklan kecil

Contamine-sur-Arve

11.428 km

Mesin penggilingan gigi
KOEPFER140 H

Hubungi

Iklan kecil

Staphorst

11.273 km

Mesin penempel tepi
SCMOlimpic K360

€19.500

harga tetap ditambah PPN

Hubungi

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: MR007049, Bekas: Mesin pinggir SCM, dalam kondisi sangat baik. Mesin lengkap, siap langsung digunakan. Bekas: Mesin penempel pinggir (edge banding machine), merek SCM – tipe Olimpic K360 T-ER13 Dilengkapi dengan opsi berikut: - Mesin sesuai standar CE Eropa - Unit semprotan anti-lekat AAR - Unit scraper lem RC-V - Unit sikat SP-V - Kontrol Touch 7 – kontrol layar sentuh 7” (misal: menyimpan hingga 60 program) - AUTOSET untuk T-ER1 3 posisi untuk unit frais penyamarataan R-K 2 posisi untuk unit frais melengkung pengaktifan pneumatik untuk unit scraper lem - Sensor nesting untuk unit pemrosesan Mesin dilengkapi dengan unit-unit berikut: Blodpfxozgwzve Ad Rjk – Unit frais pendahuluan dengan 2 motor – dengan pembersihan udara terkompresi setelah proses frais – Unit semprot, menyemprot setelah frais pendahuluan guna mencegah menempelnya lem di permukaan. – Unit lem, dengan pengaturan suhu ganda untuk pemilihan lem PU atau EVA. – Unit pemotong pita pinggir. – Unit frais dengan rol pemandu yang kokoh, untuk hasil frais yang presisi di sepanjang permukaan. – Unit frais melengkung, untuk pemrosesan sudut membulat atau sudut miring pada ujung panel. – Unit scraper radius untuk hasil akhir yang halus sempurna (R=2). – Unit semprot, untuk membantu pelarutan lem dan memberikan efek kilau. – Unit scraper lem, untuk menghilangkan sisa lem di permukaan. – Unit sikat untuk memoles sisi yang sudah ditempel. Spesifikasi teknis: - Ketebalan pita min./maks.: 0,3-3 mm - Kecepatan feeder : 11 m/menit - Ketebalan panel minimum : 8 mm - Ketebalan panel maksimum : 50 mm - Berat : 1.433 kg - Nomor seri : AH/118707

Lihat detail

Iklan kecil

SCM Olimpic K 360 T-ER1 SCM olimpic k360

Zawisty Dzikie

10.215 km

SCM Olimpic K 360 T-ER1
SCMolimpic k360

€17.200

VB ditambah PPN

Hubungi

Kondisi: bekas, Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, arus masuk: 23 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, ketebalan tepi (maks.): 6 mm, kecepatan pemakanan sumbu X: 11 m/menit, panjang total: 4.200 mm, berat keseluruhan: 1.430 kg, Perlengkapan: Penandaan CE, dokumentasi / manual, We offer this used SCM Olimpic K 360 T-ER1 machine, year of manufacture 2017. Feed speed: 11 m/min Panel thickness: 8–60 mm Edge thickness: 0.4–6 mm Coiled edging: 0–3 mm Strip edging: up to 6 mm Compressed air pressure: 6 bar Minimum workpiece length: 140 mm Minimum workpiece width: 90 mm Distance between consecutive workpieces: 600 mm Power supply: 400V Weight: 1430 kg Machine length: approx. 4.10–4.20 m Equipment: Bljdpfezb Aahox Ad Rjk 1. Pre-milling unit - 2 counter-rotating diamond heads - removal of up to approx. 3 mm of material before edging 2. EVA glue unit - Teflon-coated glue pot - fast heating - possibility to use interchangeable glue pots 3. Pressure zone - powered roller + 2 pressure rollers 4. End cutting unit K-2 - straight or bevel cut - automatic mode switching 5. Top/bottom trimming unit - edging processing for flush, radius, or bevel 6. Corner rounding unit - processing of front and rear corners - radius R1/R2 7. Profile scrapers - edge radius finishing 8. Flat scraper - removal of glue residue 9. Polishers - removal of glue residue 10. Anti-adhesive fluid system - 2 fluid types for easier glue residue removal The machine is fully operational. In continuous operation. Testing possible. If you have any questions or need additional information, please send us a message.

Lihat detail

Iklan kecil

Gabungan planer dan pengental Casadei PFS 520 - sofort verfügbar -

Bitburg

11.321 km

Gabungan planer dan pengental
CasadeiPFS 520 - sofort verfügbar -

€15.990

harga tetap ditambah PPN

Hubungi

Kondisi: baru, Tahun pembuatan: 2025, CASADEI PFS 520 - Surface and thickness planer with 520 mm planing width and motorized thickness table adjustment Robust steel and grey cast iron construction Large, ribbed jointer tables made of grey cast iron, stress-relieved to prevent warping Smooth operation due to high self-weight Four feed speeds Motorized thickness table lift with two speeds and digital display Segmented pressure shoes at the infeed 4-knife cutter block with precision bearings Helically geared steel infeed roller for especially even and gentle wood feed Outfeed roller with rubber coating Large planing fence, tiltable 90°–45°, readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa cutter block: Cutter knives can be changed within seconds When the machine starts, the centrifugal force automatically tensions the knives – self-locking The knife projection adjusts itself automatically without any manual setting or screwing The jointer table is adjusted via a robust and precisely guided parallelogram system, ensuring the distance between the table lips and cutter block remains constant in every position The sturdy aluminum planing fence is anodized as standard, easy to move, and provides a large support area The adjustable tilt from 90° to 45° is easily visible from the workstation Standard with auxiliary fence for safe planing of narrow workpieces Image shows optional equipment The extraction port position remains the same for both surfacing and thickness planing modes Thus, no further extraction hose or cumbersome replugging and routing around the machine is necessary. Technical Data Total length of jointer tables: 2300 mm Infeed table length: 1180 mm Planing width: 520 mm Planing fence dimensions: 1200 x 190 mm Planing fence tilt range: 90–45° Blsdpfx Asbxz S Hsd Rok Min./max. planing height: 3/250 mm Cutter block diameter/number of knives: 100 mm / 4 pcs Feed speed: 5/8/12/18 m/min Cutter block speed: 5000 rpm Motor rating: 400 V / 50 Hz / S6 Extraction port diameter: 120 mm Weight: 1020 kg Top machine Location: Bitburg – immediately available

Lihat detail

Iklan kecil

Willroth

11.237 km

Mesin pelapis tepi
SCMolimpic k 360

Hubungi

Iklan kecil

Willroth

11.237 km

Mesin pelapis tepi
SCMolimpic k 360

Hubungi

Iklan kecil

Saerbeck

11.191 km

Pusat mesin
WeekeBHX 500

€45.000

harga tetap ditambah PPN

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Machining centre Manufacturer: Weeke Model: BHX 500 Blsdjh E Sghopfx Ad Rsk Year of manufacture: 2008 Working area X: 2,500 mm Working area Y: 1,300 mm Working area Z: 4 - 80 mm Number of milling units: 2 Number of drilling units: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Grooving saw: swivels 90° X-axis feed rate: 130 m/min Y-axis feed rate: 80 m/min Z1-axis feed rate: 50 m/min Z2-axis feed rate: 27 m/min Spindle speed: 18,000 rpm Dismantled – immediately available

Lihat detail

Iklan kecil

Memutar mesin bubut otomatis TAKAMAZ Japan XT-6 part loader

Coevorden

11.240 km

Memutar mesin bubut otomatis
TAKAMAZ JapanXT-6 part loader

€73.500

harga tetap ditambah PPN

Hubungi

Iklan kecil

Mesin pelapis tepi Brandt KDF 440 Edition

Jerman

10.817 km

Mesin pelapis tepi
BrandtKDF 440 Edition

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Brandt KDF 1440 Edition only 1,700 operating hours – excellent condition – can also be supplied with the XES 200 Autark pre-heating station (+ €4,500) OVERVIEW OF UNIT CONFIGURATION: JOINTING MILLING UNIT: 2 x 2.2 kW 200 Hz GLUING UNIT: QA 65 N END TRIMMING UNIT, BEVEL/STRAIGHT: 2 x 0.18 kW PNEUMATIC ADJUSTMENT FOR END TRIMMING, BEVEL/STRAIGHT MULTI-STAGE MILLING UNIT: MS 40 (counter-rotation) PNEUMATIC TWO-POINT ADJUSTMENT PROFILE MILLING UNIT: 1 x 0.35 kW WD 60 (suitable for construction flooring) PNEUMATIC TWO-POINT ADJUSTMENT FOR RADIUS/BEVEL MULTI-STAGE SCRAPER UNIT: MZ 40 GLUE JOINT SCRAPER BUFFING UNIT Top pressure: PU rollers instead of standard rollers Additional QA 65 N gluing unit (interchangeable) Release agent spraying unit for workpiece Automatic edge feed Multiple roller tracing for multi-stage milling unit MS 40 + multi-stage scraper MZ 40 Cleaning agent spraying unit WORKPIECE AND EDGE PARAMETERS: – Minimum workpiece width: – For workpiece thickness 8–22 mm: 70 mm* Bsdpfx Adozb Iggj Rolk – For workpiece thickness 23–40 mm: 120 mm* – For workpiece thickness 41–60 mm: 150 mm* *depending on workpiece length – Workpiece overhang: 38 mm – Workpiece thickness: 8–60 mm – Maximum edge height = workpiece height + 6 mm – Edge material (coil): 0.4–3 mm – Max. edge cross-section: – For PVC: 135 mm² – For veneer: 100 mm² – Max. coil diameter: 830 mm – Edge material (strips): 0.4–8 mm – Max. edge cross-section for strips: 360 mm² – Feed speed: 8–14 m/min – Maximum feed speed with profile milling: 11 m/min – Working height: 950 mm – Pneumatic connection: min. 6 bar – Total length: 5,573 mm Complete description: see PDF

Lihat detail

Beriklan di sini