Mesin perapi tepi (router)

SCM OLIMPIC K360

MACHINING CAPACITIES:
- Panel height (thickness) to be machined: 8 to 60 mm
10 to 45 mm when using the corner rounder
- Panel length: ≥ 220 mm
- Panel width: 90 to 1100 mm
- Feed drive (feed rate): 11 m/min
- Workpiece overhang: mm
- Min-max dimensions for panel rounding: Ø x mm
- Panel overhang relative to the conveyor:
- Max spindle (shaper) removal per pass: mm²
- Interval between workpieces: mm

Edgebanding from rolls:
- Thickness: 0.4 to 3 mm
- Width (height): panel thickness +4 mm
- Minimum length: 200 mm

Edgebanding strips:
- Maximum thickness: 6 mm
max 3 mm with corner rounding unit
- Width (height): panel thickness +4 mm
- Minimum length: 220 mm
280 mm with corner rounder

MACHINE CONFIGURATION:
- Unwinding table, effective Ø795 mm
- Worktable: L 4.15M, H 91.5 cm
With 500 mm front extension
- Chain feed conveyor
- Anti-adhesive spraying system
- Edge pre-milling units (2 spindles) 12,000 rpm
- Glue station with interchangeable glue pot, 180-200°C
Pneumatic pre-cut guillotine
Lamination (pressing) with 3 rollers, 1 motorized
- End trimming unit with 2 blades, 12,000 rpm
- Top/bottom flush trimming unit with copying pads
- Corner rounding unit
- Radius scrapers
- Flat scrapers
Digital counters for adjustments (Siko type)

OTHER FEATURES:
- Main power: 400V, 3-phase, 50Hz, IN 21A
- Feed drive motor: 0.75 kW
- Pre-milling spindles motor: 2x1.5 kW
- Saw motors: 2x0.19 kW
- Flush trimming (milling) motors: 2x0.55 kW, rpm
- Pneumatic supply: 8-10 bar, dry air
Required working pressure: 6 bar
Bljdpfxox Dcn Ns Aarsr
- Extraction ports: 3xØ75 mm int. + 2xØ50 mm int. + Ø95 mm int.
Required airflow: 1600 m³/h
- CE marking, lockable contactor, emergency stop buttons

Operating dimensions: 4.45 x 1.70 x h.1.80 m
Transport dimensions (LxWxH):
4.25 x 0.90 x h.1.50 m
Weight: 1430 kg

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.