Empat sisi planer SCM PROFISET 60

SCM profiset 60

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Konfigurasi spindel 1. Spindel: spindel penyerut – 4 kW 2. Spindel: spindel vertikal kanan – 5,5 kW 3. Spindel: spindel vertikal kiri – 5,5 kW 4. Spindel: spindel horizontal atas – 4 kW 5. Spindel: spindel horizontal bawah – 4 kW 6. Spindel: spindel universal – 4 kW Kecepatan spindel: 6.000 rpm Diameter spindel: 40 mm Area kerja Dodpfx Aoyym Nrjhujur Lebar kerja: 25–230 mm Tinggi kerja: 10–120 mm Panjang minimum benda kerja: 450 / 630 mm (tergantung model) Pengumpanan Kecepatan variabel: 5–25 m/menit Diameter rol pengumpanan Ø 140 mm Panjang meja masuk 2.000 mm Area alat Spindel vertikal: 100–180 mm Spindel horizontal: hingga 180 mm Kedalaman profil vertikal maksimum: 40 mm Perlengkapan Pelumasan meja dan sentral manual Konstruksi industri yang kokoh, berjalan halus dan presisi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Pusat kerja Biesse Rover A 1542 Area kerja X: 4140 mm Area kerja Y: 1560 mm Area kerja Z: 245 mm Dusdpfxoyh Nd Ro Ahuer Electrospindle 5-sumbu, dudukan HSK-F63 Kepala bor vertikal: 17 Kepala bor horizontal di X: 6 Kepala bor horizontal di Y: 4 Mata gergaji untuk alur Penukar alat dengan 25 posisi Meja kerja dengan 8 balok

Kondisi: bekas, nomor mesin/kendaraan: 4/14242, Frank floor sanding machine FSR used Motor power: 0.75 kW Voltage: 230 Volts 5 Amps, 50 Hz Machine no.: 4/14242 Dusdeb Auu Rjpfx Ahujr Dust bag included Location: Ex stock Bitburg

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10006565, Weinig Powermat 1500 Working width: 30 - 310 mm (with tool flying circle 93-125 mm) Working height: 100 - 200 mm (with tool flying circle 93-125 mm) Number of spindles: 6 Bottom spindles: 2 Right spindles: 1 Left spindles: 1 Top spindles: 2 Spindle arrangement: bottom-right-left-top-top-bottom Maximum spindle speed: 8,000 rpm Spindle diameter: 40 mm Powerlock tool holder Including beveling unit Separate motor for each spindle Electronic feed including brake, steplessly adjustable 5-40 m/min Durofer pointed-tooth feed rollers Short infeed table, 1.2 m long, with 2 powered rollers above the table Machine table surface with hard coating Manual lubricant pump Dedporq Ebfsfx Ahujur WEINIG Comfort Set Control system: WEINIG MEMORY PLUS-SYSTEM CE marking Declaration of conformity

Kondisi: bekas, en-horizontal-impregnation-system-pro-flow-single-parts-with-flu shing-circuit-length-2700-mm-width-1100-mm-height-850-+-150-mm-mo tor-power-0.37-kw-electrical-power-0.5-kw-compressed-air-6-bar--- functional-features-machine-for-horizontal-flooding-of-individual -parts-product-is-dispensed-through-a-row-of-nozzles-excess-produ ct-is-blown-off-by-air-nozzles-the-pump-and-air-nozzles-are-autom atically-controlled-and-are-activated-only-when-the-workpiece-pas ses-through-this-reduces-compressed-air-consumption-the-circulati on-mode-ensures-minimal-product-usage---design-features-structure -sturdy-steel-frame-coated-with-high-strength-water-soluble-produ cts-machine-body-made-of-heat-sealed-thick-polypropylene-panels-f our-independent-chambers-for-infeed-impregnation-blow-off-and-out feed-horizontal-transport-of-workpieces-by-motor-driven-grooved-p lastic-rollers-frequency-inverter-for-speed-control-and-adjustmen t-transmission-exclusive-system-ensures-all-transmissions-are-arr anged-outside-the-impregnation-chamber-for-easy-access-this-allow s-for-longer-operating-times-and-eases-maintenance-tasks-movable- parts-are-protected-by-covers-and-appropriate-seals-circulation-p ump-pneumatic-double-diaphragm-pump-with-valves-seals-and-diaphra gms-made-of-nitrile-rubber-housing-made-of-pvdf-plastic-material- air-nozzles-first-chamber-features-a-blow-off-system-to-prevent-p roduct-leaks-a-second-blow-off-system-after-the-impregnation-cham ber-removes-excess-product-from-the-workpiece-electrical-control- panel-complies-with-ce-ip55-protection-includes-frequency-inverte r-to-adjust-the-conveying-speed-technical-data-length-mm-2700-wid th-mm-1100-conveying-speed-min-max-m-min-3-6-drive-motor-power-kw -0.37-installed-electrical-power-kw-0.5-distance-between-infeed-a nd-outfeed-rollers-mm-2520-working-height-adjustable-mm-850-+-150 -minimum-length-of-workpieces-to-impregnate-mm-250-maximum-width- of-workpieces-to-impregnate-mm-300-maximum-height-of-workpieces-t o-impregnate-mm-250-compressed-air-consumption-l-min-2000-require d-compressed-air-pressure-bar-6-equipment-and-included-accessorie s-flushing-circuit-for-pro-flow---price-of-the-above-mentioned-ma chine-on-request-plus-packaging-and-shipping---technical-data-as- stated-by-the-manufacturer-no-liability-illustrations-may-differ- from-the-original-prices-net-plus-vat-domestic-market) Duedsnl Nqqopfx Ahujr

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Four-side planer - Maximum planing width: 23 cm - Maximum planing height: 16 cm - 2 feed rollers integrated into the table - Chrome-plated table - Infinitely variable feed speed adjustment Duedehlp D Nspfx Ahuor - 2 overhead return rollers positioned in front of the lower head, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, with little use. Equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, ketinggian potong (maks.): 400 mm, panjang mata gergaji pita: 5.550 mm, lebar pita gergaji: 80 mm, panjang meja: 800 mm, lebar meja: 1.060 mm, tinggi kerja: 400 mm, pl-hu-001 Dsdow H Rq Hspfx Ahusur

Kondisi: baru, Tahun pembuatan: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle shaft (milling spindle) Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed, one-sided tilting spindle for tilt range from -5° to +45.5° Positioning control for height and tilt adjustment with height zeroing and offset travel Electronic position and speed indicators 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick-clamping system for cutter arbor Finely planed cast iron table with rigid frame support Control panel mounted below on rigid frame support Cutter fence 216 with total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum chip deflector lips Machine socket outlet Lockable main switch Dodsfpb Nmopfx Ahueur Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle shaft 30 mm, non-interchangeable CE compliant GS tested

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Saw, Type: ZS 200 N – 5 kW Motor Includes machine stand, but without saw blade Machine can be tilted using handwheel and worm gear (at the rear) Saw blade diameter: 520 mm, blade bore: 50 mm Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Dedpfx Aoi Dfidohuour Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled to one side to approx. 25° for acute angles and tilted left up to 30° for flat cuts Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baik (bekas), 0749 Duodeh T Dzqjpfx Ahuor