Gergaji meja geser

SCM SIGMA 115 PLUS

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), This is a complete production line for house construction. Prices are listed for each individual item. Consisting of the following components (see the attached document as well): Images to follow; they are already included in the attached document. Table 1 (Laying in and clamping the frame construction) €34,500 - Height-adjustable longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity Table 2 (Laying the first facing layer and fastening) €25,300 - Longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 3 (Laying the second facing layer, fastening, and flipping the element onto the next table) €35,650 - Longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity Lhsdpfxju D Amgs Aglsb - Hydraulic turning device Table 4 (Installation of electrical components and insulation) €34,500 - Cross transport with rollers and facing layer - Table cross travel - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Laying the first facing layer and fastening the second side) €32,775 - Longitudinal transport with 3 hinge conveyors - Cross transport with rollers - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 6 (Laying the second facing layer and fastening) €28,750 - Longitudinal transport with 3 hinge conveyors - Pneumatic cross clamping - Connections for compressed air and electricity Table 7 (Assembly and distribution table) €29,900 - Longitudinal transport with 3 hinge conveyors - Hydraulic swivel unit - Table cross travel unit - Upper guide for holding wall elements vertically Manual surface portal with vacuum lifter on Table 2 €13,800 (Laying the first facing layer) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 3 €13,800 (Laying the second facing layer) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 5 €13,800 (Laying the first facing layer on the second side) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 6 €13,800 (Laying the second facing layer on the second side) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Wall storage rack 1: 12 m long x 24 tracks €11,500 Wall storage rack 2: 12 m long x 20 tracks Vacuum lifter with column slewing crane €9,200 1 Abus spreader beam 2 t €20,125 1 spreader beam 2 t

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Max. panel width: 4400 mm Max. panel length: 4300 mm Max. main saw blade projection: 110 mm Number of clamps: 8 Lsdpjmt Hhwsfx Agljhb

Kondisi: sangat baik (bekas), VK450 2RE log debarker. Equipped with two rotors. One is a stump grinder rotor. The other is a debarking rotor. Minimum-maximum log diameter: 8-45 cm. Minimum log length: 3 m. Comes complete with original VK centering conveyor. Will be sold after complete overhaul. Ljdpfx Agsulv Hzelohb

Tahun pembuatan: 2000, Kondisi: baik (bekas), Lini besi EWD Combimes. Tahun pembuatan 2000, tipe DK90-TL. Pengumpanan kayu dari kiri. Lebar besi maksimum 500 mm, ketebalan maksimum 120 mm. Motor penggerak 90 kW. Frekuensi siklus dengan kayu 4,0 m sekitar 18 buah/menit. Lengkap dengan sistem kontrol EWD asli. Pengiriman dari konveyor penampung sebelum pemisahan hingga pemisah serpihan termasuk. Lini lengkap dan dalam kondisi baik. Lhodoxcwvxopfx Aglsb

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Lhedsw Sy T Hjpfx Aglsb Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: bekas, nomor mesin/kendaraan: 007186, Type of applied edge: thin edge, thick edge Adhesive system: EVA Joint milling: yes Multifunction unit: yes Ledeu T Tuwspfx Aglohb Top milling unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Working units: 10 pcs

Kondisi: perlu perbaikan (bekas), Lathe for machining small wooden pieces; the machine processes diameters from 7 to 45 mm. Lsdpouknznefx Agljhb

Kondisi: sangat baik (bekas), Panel dividing saw angular system Control: OSI Plus with Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st Push feed saw with 5 grippers 90° turning device for panels Ledoukhd Aspfx Aglshb 1st panel dividing saw, max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. blade diameter): approx. 215 mm Main saw (max. blade diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 Shear for waste material reduction 2nd Push feed saw with 10 grippers 2nd panel dividing saw, max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. blade diameter): approx. 215 mm Main saw (max. blade diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 No. 2 front air-cushion tables (mm: 2200 x 1500) Automatic outfeed bridge for cut panels “RBO (BIESSE)” model Lifter with 6 stacking positions

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 200 t, lebar meja: 300 mm, tinggi potong dengan pisau scoring (maks.): 100 mm, panjang spindle milling: 250 mm, Equipment: - 1 GRECON feeding transfer system with accumulation for 4 to 5 purged lamellae of varying lengths for finger jointing - 1 GRECON double finger jointing system with deep tooth profile (for glulam beams) - 1 180° transfer system with two-component gluing - 1 GRECON finger jointing press Lhjdpjwz H Anefx Aglob - 1 CNC controlled cross-cut saw - 1 outfeed table

Kondisi: seperti baru (mesin pameran), en-demo-unit-with-7-operating-hours-another-machine-available-im mediately-ex-works-neckartailfingen-shredder-mrz-830-customs-tari ff-number-84659600-infeed-opening-800x1000-mm-motor-185-22-kw-400 -v-50-hz-3-ph-blades-reversible-multiple-times-hydraulically-actu ated-pusher-screen-size-as-selected-10-40-mm-weight-approx-1600-k g-dimensions-lxwxh-approx-2290-x-1420-x-1750-mm-turbo-clutch-stan dard-features-include-automatic-star-delta-start-fast-hydraulics- auto-shutdown-when-rotor-idles-rotation-speed-70-90-rpm-for-high- throughput-cycle-control-to-avoid-downtimes-performance-enhancing -step-control-for-hydraulic-pusher-pertinax-guides-for-hydraulic- pusher-vibration-damping-machine-feet-ce-compliant-the-shredder-i s-designed-for-the-size-reduction-of-untreated-wood-chipboard-and -mdf-panels-other-materials-upon-testing-and-approval-by-the-manu facturer-included-30-cm-higher-machine-frame-prepared-for-conveyo r-belt-optional-shredder-accessories-angled-conveyor-belt-eur-877 0-net-horizontal-section-1200-mm-inclined-section-2500-mm-angle-a djustable-0-60-degrees-discharge-height-approx-2000-mm-+-100-mm-o verband-magnet-eur-6780-net-conveyor-and-overband-magnet-control- eur-2750-net-start-and-stop-synchronously-with-shredder-raw-mater ial-requirements-moisture-content-absolutely-dry-must-be-below-30 -metals-and-mineral-contaminants-such-as-sand-stones-etc-lead-to- increased-wear Ljdpev Sqrpefx Aglehb