Gergaji panel dengan pemuatan belakang

SCM Sigma Impact

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Kondisi: berfungsi penuh, terawat dengan baik, sedang berproduksi. Tersedia segera! Mesin gergaji panel SCM SIGMA IMPACT 87, tahun 2012, merupakan mesin gergaji panel industri yang kuat, akurat, dan andal, dirancang untuk operasi pengolahan panel dan produksi furnitur dengan produktivitas tinggi. Ideal untuk pabrik pengolahan kayu, produsen kabinet, serta produksi skala besar. Rsdpsycg Rmsfx Ah Sen Spesifikasi teknis: Dimensi pemotongan: 3200 × 2100 mm Proyeksi pisau utama: 87 mm Diameter pisau utama: 350 mm Kecepatan pisau utama: 3900 rpm Daya motor utama: 5,5 kW Pisau scoring: 1,5 kW, 6300 rpm, 160 mm Kecepatan gerobak: 6–30 m/menit Kecepatan pendorong: 27–38 m/menit Penjepit standar: 5 Lubang ekstraksi debu: 3 × 120 mm atau 1 × 150 mm

Kondisi: bekas, Working width 1350 mm Number of sanding units: 2 units Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 X 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Variable speed gearbox for feed belt, infinitely adjustable: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 DRUM BRAKE for belt stopping - Swiveling ROLLER for belt tensioning - 3 PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 ROLLER CONVEYORS with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED BELT - 1 EXTRACTION PORT, 160 mm Ø - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No photoelectric sensors 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt run-off! - Unitek calibrating roller made of steel (standard for all models) - Unitek flexible pressure pad before and after the roller (standard for all machines with 1 roller) - Unitek grit compensation with mechanical grid set, 6 positions (each – standard for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor with 18.4 kW instead of 14.7 kW (PER MOTOR) Redpfjrmucxex Ah Ssn - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in case of emergency stop (standard for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller conveyors with 4 rollers (standard for all models) - Price per roller conveyor - Unitek electronic machine control with 12'' touchscreen (standard for all models) Automatic workpiece detection with feed control ----- Machine price in above configuration on request! ----- Optional extras at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and commissioning: EUR 1,300.00 ----- All quoted prices are net prices plus statutory VAT of 19% ----- (Technical data as per manufacturer – subject to change without notice!)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, panjang pemotongan (maks.): 3.800 mm, diameter mata gergaji: 380 mm, ketinggian potong (maks.): 90 mm, lebar pemotongan (maks.): 3.800 mm, diameter utama gergaji: 380 mm, berat keseluruhan: 4.400 kg, Large Format Panel Saw SIGMA IMPACT 90 (SCM Group) suitable for precise cutting of furniture components, single or stacked boards. Manufacturer: SCM Group Model: Sigma Impact 90 Year of manufacture: 2017 Cutting width: 3,800 mm Cutting depth: 3,200 mm Max. cutting height: 90 mm Air tables: 1x 2,500x600mm, 3x 2,500x600mm Air flotation integrated in the base frame. Max. diameter of main saw blade: 380 mm Scoring unit diameter: max. 300 mm Rear pusher: brushless motor, max. speed 120 m/min! Saw carriage: brushless motor, max. speed 150 m/min! THK linear guides for saw carriage movement. THK linear guides for rear pusher movement. Automatic central lubrication for THK guideways. HI-TRONIC Package: - Main motor 15 kW (S6 duty) - Lifting of main and scoring blades via ball screws - Optimized main blade stroke - Electronic 2-axis scoring adjustment - Grooving with main blade (electronic depth adjustment) - Postforming cuts - Non-through cuts (cutouts) - Blade clamping by AKE flange Number of clamps: 10 pcs (max) Automatic exclusion of side clamp (up to 800 mm width) Start/stop foot pedal Label printer Control software: WINCUT Optimization software: OTTIMO PERFECT CUT TOP (1x hardware key) Rjdpfex Nc Ayjx Ah Sen Operator PC Eye-S: Windows + 21" touchscreen Air-conditioned electrical panel Automatic panel dimension measurement Laser line for cut marking Automatic twin side pressure device – motorized (60–2,200 mm) Machine condition: Fully operational Possible to inspect in current operation. Availability: Approximately April 2026

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), USED AUTOMATIC FRONT-LOADING PANEL SAW Brand: SCM Model: SIGMA IMPACT year: 2006 CE certified Rjdpfxjhkr A Sj Ah Sjn Usable cutting dimensions: 3200 x 3200 mm Maximum cutting height: 67 mm 3 long air flotation tables and 2 shorter, wider air tables 6 pneumatic clamps Main saw motor: 10 HP Scoring unit PC with WINCUT software.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, nomor mesin/kendaraan: 3069 / BM5132, BM5132 Professional stretch film wrapper Rodpfoqpgl Rex Ah Sjn - Height adjustment - Wrapping height approx. 2,500 mm - Turntable diameter 1,600 mm - Maximum load capacity 1,600 kg - Film roll width 500 mm - Weight approx. 500 kg - Connection voltage 400V - 50 Hz - 3 Ph

Kondisi: bekas, Tahun pembuatan: 2011, Numerical WINCUT control Working dimensions (mm): 3800 x 3800 Max. blade projection (mm): 107 Front panel loading: No. 10 clamps on the pusher carriage Side aligner Scoring unit (max. blade diameter / power): 160 mm / 1.5 kW Main saw unit (max. blade diameter / power): 380 mm / 7.5 kW Rjdpfewwrywex Ah Ssn Adjustable saw carriage speed (m/min): 1 - 135 Pusher carriage speed: 70 m/min No. 3 air flotation front tables TECHNICAL DATA TO BE VERIFIED WHEN THE MACHINE IS IN OUR WAREHOUSE

Kondisi: bekas, Tahun pembuatan: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY SIMPLE PROGRAMMING MATIC WORKTABLE: ONE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (reference side) mm 3,680 Working area Y-axis (max. loadable workpiece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length in pendulum operation mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air velocity m/s 25 Extraction port diameter mm 250 GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with workpiece support table, suitable for performing: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Grooving with disc cutter - General milling operations 3-4-5 axes MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced by welded reinforcements across the entire machine bed, ensuring extreme stability. The specially designed table form, with a broad base, is key to guaranteeing lasting precision and stability. The machine layout allows the operator an optimal workflow while keeping space requirements to a minimum. The mobile gantry carrier is constructed from a solid monoblock. It is positioned in the X-direction on prismatically ground guides with recirculating ball carriages. The machining unit on this mobile aggregate carrier is also guided on prismatically ground guides and recirculating ball carriages AXIS TRAVEL All axes move on large-section linear prism guides and recirculating ball shoes with a large support surface, ensuring optimal sliding even at maximum speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved by helical rack and pinion. Large-section recirculating ball screws ensure precise positioning of the working unit along the mobile gantry (Y- and Z-axes). MOTORS, DRIVES AND INVERTERS The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, dimensioned to allow speeds of up to 90 m/min while maintaining the best finishing quality CONTROL The control unit consists of a numerical controller for milling and drilling machines with the "Xilog Maestro" graphical user interface running on: - Office operating system Windows 7 - 17” color LCD screen - QWERTY keyboard - Swiveling control panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features Programming - Parametric graphical programming - Import of DXF files (2D; geometries "SPLINE", "POLYLINE 3D", line or circle interpolation in three axes, linear in space, spiral interpolation in the selected plane) - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Capability for panel zero-point shifting to execute drilling on inclined or curved panel edges Rsdsxnldbopfx Ah Sjn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, panjang spindle milling: 150 mm, daya: 11 kW (14,96 hp), diameter spindel: 40 mm, berat keseluruhan: 1.500 kg, Double-sided swiveling spindle mounting with two robust segment guides, column in modern steel construction, table made of heavy-duty, high-ribbed cast design, interchangeable milling spindle, three-phase motor with 4 speeds, electric height and swivel adjustment with rapid traverse and creep speed as well as electronic digital display, incremental scale switching for height adjustment, milling fence with fine adjustment, metal fence jaws, and replaceable aluminum anti-splinter inserts. Extraction ports on the fence and below the table, each 120 mm in diameter. Minimum extraction speed at the port: 20 m/s. Rotatable table insert. Interlocked reversing switch for clockwise and counterclockwise rotation. Lockable main switch, cam switch, automatic motor brake. Table size: 1350 x 800 mm Table height: 880 mm Motor power: 11 kW Spindle taper: MK 5 Speeds: 3000/4500/6000/9000 rpm Spindle swivel range: -5° to +45° Height adjustment: approx. 145 mm Control: CNC Table extension on both sides, total length 2500 mm, including pull-out support frame Infinitely variable 4-roller feed 2-axis control Spindle: 40 mm diameter, 150 mm length Redjwcpqqepfx Ah Sjn

Kondisi: baik (bekas), Tahun pembuatan: 2007, deu-TECHNISCHE_DATEN-Max_bearbeitbare_Laenge_3200_mm_Min_bearbei tbare_Laenge_200_mm_Max_Breite_200_mm_Min_Breite_40_mm_Max_Werkst ueckhoehe_130_mm_Tiefe_bei_max_Tenonierstift_Durchmesser_320_mm_1 05_mm_Tenonierwagen_Geschwindigkeit_min_max_0_100_m_min_Profilier geschwindigkeit_min_max_3_15_m_min__TENONIEREN_1_Stirnschnittsaeg e_5_5_PS_4_kW_Saegeblatt_D_400_mm_2_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_3_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_Vertikale_Positionierung_mit_du rchgehender_Achse_4_Digitale_Winkelverstellungsspannvorrichtung_P ROFILIEREN_5_Profilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5 _kW_Werkzeugdurchmesser_130_240_mm_Achshub_280_mm_Zeitversetzter_ Anti_Ausbraakschutz_bei_Kalibrierung_Doppelte_Drehrichtung_Vertik ale_und_horizontale_Positionierung_mit_durchgehender_Achse_6_Prof ilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5_kW_Werkzeugdurch messer_130_240_mm_Achshub_280_mm_Vertikale_und_horizontale_Positi onierung_mit_durchgehender_Achse_7_Profilierfraeser_rechts_Schaft _50_x_320_mm_10_PS_7_5_kW_Werkzeugdurchmesser_130_240_mm_Vertikal e_und_horizontale_Positionierung_mit_durchgehender_Achse_8_Restte ilrueckgewinnungsgruppe_Vertikale_und_horizontale_Positionierung_ mit_durchgehender_Achse_Vorrichtung_zum_Fluegelauszug_Hfutwt78Z_9 _Untere_horizontale_Nutwelle_Vertikale_und_horizontale_Positionie rung_mit_durchgehender_Achse_88_5_PS_66_4_kW_10_Digitale_Fuehrung _11_Ruecklauf_der_Werkstuecke_zum_Bediener Redpfx Aot R T Hcjh Sen

Kondisi: baru, Tahun pembuatan: 2023, Orbital sanders are designed for sanding straight, curved, and shaped pieces with round or oval cross-sections, etc., and with variable thickness for chairs, tables, beds, and related items. The main features of the machine are: frame made of electro-welded steel; rotating disc with 2 counter-rotating sanding belts driven by an electric motor, with a rotating movement around the workpiece; electrical control panel; 2 adjustable worktables (infeed – outfeed); option for mounting 2 automatic workpiece feed units with variable speed via frequency inverter. Sanding belts: 80 x 1260 mm Min./max. workpiece diameter: 10-100 mm (Ø) Min. curvature radius: 200 mm Dimensions: 760 x 1000 x 1800 mm 3 units Camam, Comec, OMEF, Brusa di Garboli Rsdpoqnufvsfx Ah Sjn