Router meja, router putar

SCM tw 45 c

Kondisi: baru, Tahun pembuatan: 2025, Spindle moulder type: minimax tw 45c With aluminium sliding table and tilting spindle – high performance at a low investment cost Article No.: 5502045 Brand: Holzkraft / SCM TECHNICAL DATA Dimensions and Weights Net weight approx.: 290 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Work table length: 1000 mm Sliding table length: 1000 mm Work table width: 435 mm Sliding table width: 270 mm Table height: 900 mm Installation Information Space requirement (length): 1945 mm Machine body width/depth: 710 mm Space requirement (width/depth): 2220 mm Working area (length): 1600 mm Explanation of space requirement: Maximum travel range or effective lengths are considered in these dimensions. Working area (width/depth): 1600 mm Machine body length: 1000 mm Explanation of working area: Add the working area dimensions to the space requirement to determine the recommended free installation area for the machine. Electrical Data Supply voltage: 400 V Main drive motor power: 5.0 kW Mains frequency: 50 Hz Spindle Spindle tilt: 0 to -45° Itodpfx Aehp Rcyspaok Spindle speeds: 3500/7000/10000 rpm Usable spindle length: 100 mm Spindle shaft diameter: 30 mm Maximum spindle projection above table: 130 mm Maximum Cutter Diameters Maximum tool diameter (retractable): 180 mm Maximum tenoning cutter diameter: 275 mm Maximum profile cutter diameter: 210 mm INCLUDED ACCESSORIES Curved workpiece guard Anodised aluminium sliding table Telescopic mitre fence Aluminium fence jaws

Kondisi: diremaj di bengkel (bekas), Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Surfacing table length: 2500 mm Feed motor: 3 kW Feed speed: 5–24 m/min Total power requirement: 27 kW Dimensions (LxWxH): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig 4-Side Planer Profimat 23 Window Version with glazing bead cut-off or can be used as grooving spindle ATS control and program control ----- Machine completely factory overhauled by Weinig in 2024. Technical Data – Summary (possibly incl. additional accessories, please request) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Surfacing table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle Configuration ----- > Spindle 1: bottom > Spindle 2: right, pneumatically actuated up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatically up/down Itedpfx Apexpn T Ujajk Spindle Details ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Glazing bead cutting device or can be used as grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Operator interface: Window package Combined control of right spindle and glazing bead removal via manual selector switch on control panel > Spindles with mechanical digital display (Technical data as provided by manufacturer – no liability assumed!)

Kondisi: baru, en Iodpfx Apjvwf Ucsaetk

Kondisi: sangat baik (bekas), Mesin frais spindel bawah SCM minimax tw 45c Spindel diatur manual naik-turun Spindel diatur manual sudutnya 0-45 derajat Isdpfoy R Sgqox Apaotk Poros diameter 30 mm Motor 5 KW 3 kecepatan putar Kondisi sangat baik, siap langsung digunakan

Tahun pembuatan: 2001, Kondisi: hampir baru (bekas), Dual-aggregate sander, two lower aggregates, each with 2 x 7.5 kW main power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished; the conveyor belt is in very good condition. Fitted with a new graphite pad. The machine features two bottom-mounted aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width: 630 mm. Two feed speeds: slow and fast. Sanding belt length: 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt feed speed: 9/20 m/min. Number of sanding pads: 1. CE conformity declaration. Rated total power: 21 kW. Max working height: 160 mm. The machine is equipped with two lower working rollers. Conveyor belt with upper feed system. Itodofxpbmopfx Apajk

Kondisi: baru, Tahun pembuatan: 2022, Dowel hole boring device: no Drilling depth: 150 mm Mortise length: 180 mm Itedpfxjgq Un Aj Apajk Vertical adjustment travel: 145 mm Motor power: 1.5 kW Speed: 3000 rpm Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 240 kg

Kondisi: bekas, Tahun pembuatan: 2020, Lebar kerja: 510 mm Poros serut: Silent Power Panjang meja penyerut: 2250 mm Sudut penyangga penyerut dapat disesuaikan: ya, 45° hingga 90° Ketebalan maksimum bahan yang dapat diproses pada mesin serut: 250 mm Pengaturan ketinggian meja serut: elektrik Tampilan ketebalan serutan: tampilan digital Kecepatan umpan: 4 - 16 m/menit, dapat diatur secara bertahap Rol pengumpan: baja Rol pengeluaran: baja Bilah penekan: bilah penekan bersegmen Daya motor: 7 kW Rem motor: ya, otomatis Sambungan saluran pembuangan: 150 mm Panjang mesin: 2200 mm Isdpjzq Db Refx Apastk Lebar mesin: 1050 mm Berat: 900 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, panhans-s45-EN Isdpfx Apoyhnmgsajtk

Kondisi: baru, Tahun pembuatan: 2026, Otomatis CNC bor dan penanam pasak untuk pengeboran, lem, dan penanaman pasak sepenuhnya otomatis. Pusat pemrosesan bor dan pasak dengan keunggulan compact, efisien, berkualitas dan fleksibel. Perkenalan singkat: Itjdpfx Apedx Axfeajk • Mesin bor dan penanam pasak CNC universal yang dikendalikan komputer • Pengawasan suntikan lem melalui GIC • Sistem lem tertutup • Cocok untuk pemrosesan panel dan kayu solid • Spindel bor horizontal dan vertikal tambahan opsional • Mengurangi beban pada pusat pemrosesan CNC • Pelengkap optimal untuk mesin nesting

Kondisi: baru, Table size 2500 x 780 mm Motor power 7.5 kW Spindle diameter as required mm Speed(s) 1,500 - 10,000 rpm FIMAL Tilting Spindle Moulder TX 160 L ---- 4-axis control: spindle height, tilting, parallel adjustment of the fence, and adjustment of the motorized table insert, incl. upper control panel with automatic star-delta start spindle motor. Touchscreen, tool management, and program control based on Windows operating system Milling fence including controlled parallel adjustment (1st axis), handwheel adjustment with numeric display for the front fence jaw, electric swing-away device for the complete fence, quick-release lever for fixation, aluminum fence jaws, and pressure device Controlled electromechanical spindle height adjustment (2nd axis) Controlled electromechanical spindle tilt adjustment (3rd axis): -45° to +45° Table insert adjustable to milling tool diameter (instead of table rings), Table insert is motorized (4th axis) Itsdpfx Apsxpi D Isajk Milling speeds: 1,500/3,000/4,500/6,000/8,000/10,000 rpm (displayed via touchscreen) Electrics and safety devices according to CE standards Table dimensions: 1,200 x 780 mm Max. tool size under table: d = 320 mm, H = 50 mm Motor: 7.5 kW / 10 HP / 50 Hz “L” version with table extensions on both sides and pull-out workpiece support with emergency stop button Right-left rotation according to CE Curved milling fence Option at extra cost: 4-roller feed unit Type VSA 2048 L Consistent feed speed without loss of power Right and left operation Including stand, individually tiltable and adjustable for horizontal and vertical operation Eight speeds possible, speed selection via switch and change gearbox Surcharge: 1,149.00 Euro Freight costs, including installation and 4 hours of training: Surcharge: 1,400.00 Euro (technical data as per manufacturer - no guarantee)