Press coba hidrolik

SCMB PHT 2000

Kondisi: sangat baik (bekas), Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 100 mm Grinding wheel diameter: 360 mm Gedount Eyepfx Adtebg Total power requirement: kW Machine weight approx. 3.8 t Space requirement approx. 3.5 x 1.3 x 1.5 m Machine in very good condition! External and internal spindle. Extensive accessories included.

Kondisi: baru, Bending: 13.0 mm; Sheet length: 3100 mm; Sheet thickness: 16.0 mm; Total connected load: 17.5 kW; Weight approx.: 11.6 t; Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar Bending capacity: 16.0 mm » at 3x top roller diameter Pre-bending: 13.0 mm » at 1.5x top roller diameter Top roller diameter: 300 mm Bottom roller diameter: 270 mm Side roller diameter: 210 mm Max. opening: 50 mm Working height: 1,140 mm • Fully hydraulic drive of top and bottom rollers via planetary gearbox • Digital display for side roller positions • Hydraulic drop-end bearing • Cone bending device • Hardened rollers • Hydraulic adjustment of side rollers, synchronized via PLC • Hydraulic adjustment of bottom roller via torsion bar • Pressure-adjustable bottom roller • Electric and hydraulic overload protection Gjdpfx Adsd Auacotsbg • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Important notes for cone rolling: • The max. sheet thickness is 50% of nominal capacity • The cone length may be max. 30% or must be more than 60% of the roller length • Hardened rollers are recommended

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Gjdpfoxddvnsx Adtjbg Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 124, translation-001 Gbedpfx Adjwl An Ieteg

Tahun pembuatan: 1990, Kondisi: baik (bekas), CNC 4th axis Gedpfx Adsgabu Ujtebg Make: NIKKEN Type: CNC-200, Year: 1990 with tailstock and base plate.

Kondisi: bekas, Technical details: Gbsdew Au I Iepfx Adtog Maximum ram stroke: 250 mm Maximum workpiece diameter: 80 mm Maximum workpiece length: 900 mm Total power requirement: 1.5 kW Approx. machine weight: 2.1 t Various accessories *

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Heavy-duty FPT Spirit 240-M140 moving column boring machine with high dynamics and 5-axis hydrostatic support. Working range: X AXIS: 14,000 mm Y AXIS: 5,000 mm Z AXIS: 2,500 mm Equipped with 2 rotary tables, each with 50-ton load capacity. Gedpfxowiifhe Adtsbg Automatic tool changer. CNC control: Siemens. The machine is equipped with 3 heads: - 1 automatic bi-rotary precision head (TUPCG) - 1 automatic heavy-duty milling head (TO144) - 1 D’Andrea facing/turning head, model U-TRONIC 800, for turning diameters from 150 mm to 1,600 mm.

Tahun pembuatan: 1970, Kondisi: belum diuji (bekas), Here we offer a balancing machine from Trebel. The machine is equipped with a robust steel safety cover. Gjdpfohikdwox Adtobg Offered for refurbishment, as the control cabinet is missing! Technical data: Manufacturer: Trebel Type: FC4c-xn Year of manufacture: 1970/74 Standard weight range up to 400 kg Maximum permissible load per block: 200 kg

Kondisi: bekas, various types available Gbodpfxjdc A Sbs Adtsg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, en-001 Gedpfewl U Rhex Adtebg