PEMOTONG PANEL DENGAN MEJA ANGKAT

SELCO EBT 120 L

Kondisi: bekas, Painting line consisting of: Item 1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035 Item 2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - Air blast duct, top: 2 pcs - Air blast duct, bottom: 1 pc - Dust removal brush - With ionisation bar, top - With ionisation bar, bottom - With its own drive - With its own control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction outlet Ø 180 + 120 mm - Total connected load: 7.6 kW - Voltage, Hz: 400 / 50 Item 3 Gjdpjv I Akvefx Alkeit Venjakob VEN SPRAY Perfect Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 ± 20 mm - Operator side: left - IR preheating, number of emitters: 2 pcs - Twin gun drive - Dry exhaust extraction - Extraction outlet diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Feed speed steplessly adjustable ~ 4-10 m/min - Belt cleaning system - Paint recovery via V-belt system - Gun control, EPS-CNC CNC 7000 - Colour management system for number of pumps: 3+1 pcs - Number of installed airless spray guns: 4 pcs - Quick-change system for spray units - Remote maintenance system - Dust protection hood at machine outfeed side - Exhaust air recirculation system - Exhaust fan control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~ 20 - 26 kW - Voltage, Hz: 400 / 50 - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small volume container - Gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatic and material hoses. Item 4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035 Item 5 Cefla High-Level Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Payload per pallet: 300 kg - Max. part height: approx. 110 mm - Clear height between pallets: 120 mm - Dimension: centre of pallet to centre of pallet: 3,658 mm - Max. part length: approx. 5,200 mm - Number of controllable temperature zones: 2 pcs - Supply air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Heating capacity max.: 175 kW - Max. drying temperature: approx. 55 - 60°C - With heat exchanger, hot water - Without hot water regulation valves - U-shaped pass-through configuration - Infeed side: right - Feed rate via frequency converter adjustable ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~ 23 kW - Voltage, Hz: 400 / 50 - Voltage fluctuation max. ± 5 % - Without control valves and water pumps Item 6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035

Kondisi: bekas, nomor mesin/kendaraan: 007687, Type of applied edge: thin edge, thick edge, solid wood Giodpfx Alewuz Npeket Adhesive system: EVA, hot air Jointing cutter: yes Multifunction unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Working units: 7 pcs

Kondisi: bekas, nomor mesin/kendaraan: 006370, Type of attached edge: thin edge, thick edge Giodpfx Aljl Txw Hekst Adhesive system: EVA Jointing milling: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 12 pcs

Kondisi: bekas, Tahun pembuatan: 1989, Mesin bekas Gedjw I U E Aepfx Alkjit Tahun pembuatan: 1989 Kondisi: Telah diuji fungsinya Perlengkapan dan data teknis: Ketebalan edge band maksimal: 20 mm Tinggi edge band maksimal: 51 mm Ketebalan material roll maksimal: 3 mm Panjang benda kerja minimal: 140 mm Lebar benda kerja minimal: 60 mm Sistem lem: 1906 Cartridge Unit penekan Unit frais 1920 – frais rata & miring hingga 20 mm Kebutuhan ruang (P x L x T): 3150x1800x1375 mm Berat sekitar: 800 kg Lokasi: Flörsheim Ketersediaan: Segera

Kondisi: bekas, Tahun pembuatan: 2011, Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height) MACHINE STRUCTURE The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages. AXIS MOVEMENT All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors. Maximum axis speeds: - X-axis = 90 m/min - Y-axis = 90 m/min - Z-axis = 30 m/min SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1 Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table. CE Certificate for the safety system 1 Safety enclosure 1 Safety enclosure lateral and rear Automatic centralized lubrication controlled via CNC 1 Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine. Central extraction nozzle 1 All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume. Chip conveyor 1 Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1 Giedpsxy Tmnofx Alket 5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left / right Liquid cooling Tool interface: HSK-63F 18 kW inverter for stepless, uniform power delivery Max. rotation B-axis = 200° (+/-100°) C-axis = 650° Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, • Complies with CE standards • This is a corner crimping machine designed for 90-degree joining of aluminium profiles • Equipped with 2 pneumatic top clamps and pneumatic blade movement • Features a millimeter scale system for blade height adjustment and movement • The centering square stop is automatic • Equipped with a discharge button for precise adjustment • Two pedals are used for pneumatic clamping of profiles Gsdpforbiv Asx Alksit • Includes polyamide plates to protect profile surfaces from damage • Side support arms are included

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, ketinggian potong (maks.): 90 mm, lebar pemotongan (maks.): 3.800 mm, diameter mata gergaji: 380 mm, berat keseluruhan: 4.400 kg, panjang pemotongan (maks.): 3.800 mm, diameter utama gergaji: 380 mm, Large Format Panel Saw SIGMA IMPACT 90 (SCM Group) suitable for precise cutting of furniture components, single or stacked boards. Manufacturer: SCM Group Model: Sigma Impact 90 Year of manufacture: 2017 Cutting width: 3,800 mm Cutting depth: 3,200 mm Max. cutting height: 90 mm Air tables: 1x 2,500x600mm, 3x 2,500x600mm Air flotation integrated in the base frame. Max. diameter of main saw blade: 380 mm Scoring unit diameter: max. 300 mm Rear pusher: brushless motor, max. speed 120 m/min! Saw carriage: brushless motor, max. speed 150 m/min! THK linear guides for saw carriage movement. THK linear guides for rear pusher movement. Automatic central lubrication for THK guideways. HI-TRONIC Package: - Main motor 15 kW (S6 duty) - Lifting of main and scoring blades via ball screws - Optimized main blade stroke - Electronic 2-axis scoring adjustment - Grooving with main blade (electronic depth adjustment) - Postforming cuts - Non-through cuts (cutouts) - Blade clamping by AKE flange Number of clamps: 10 pcs (max) Automatic exclusion of side clamp (up to 800 mm width) Start/stop foot pedal Label printer Control software: WINCUT Optimization software: OTTIMO PERFECT CUT TOP (1x hardware key) Operator PC Eye-S: Windows + 21" touchscreen Air-conditioned electrical panel Automatic panel dimension measurement Laser line for cut marking Automatic twin side pressure device – motorized (60–2,200 mm) Godsx Nc Ayopfx Alksit Machine condition: Fully operational Possible to inspect in current operation. Availability: Approximately April 2026

Kondisi: sangat baik (bekas), Panel dividing saw angular system Control: OSI Plus with Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st Push feed saw with 5 grippers Giodpfx Aeukhd Aelkot 90° turning device for panels 1st panel dividing saw, max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. blade diameter): approx. 215 mm Main saw (max. blade diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 Shear for waste material reduction 2nd Push feed saw with 10 grippers 2nd panel dividing saw, max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. blade diameter): approx. 215 mm Main saw (max. blade diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 No. 2 front air-cushion tables (mm: 2200 x 1500) Automatic outfeed bridge for cut panels “RBO (BIESSE)” model Lifter with 6 stacking positions

Kondisi: bekas, nomor mesin/kendaraan: 008319, Arbeitsbereich Achse X: 6380 mm Giedpsx A Tc Iofx Alkjt Arbeitsbereich Achse Y: 1380 mm Arbeitsebene: Mit Vakuum-Konsolenauflagen Leistung Haupt-Spindel: 11 KW Anz. kontrollierte Achsen: 5 Achsen Anzahl Werkzeugplätze: 32

Kondisi: bekas, Tahun pembuatan: 2017, 1 Gisdpfx Aleyudidskst