Blowing Machine SIDEL

Sidel SBO 6

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SBO 6/10, Sidel stretch blow molding machine Max. output: 6,000 bottles/hour. Max. bottle size: 3,000 cc. Blow stations: 6. The machine is in very good condition and well-maintained. GENERAL INFORMATION The SBO 6/10 features 6 molds and 10 heating modules. It is compatible with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel’s two-stage PET stretch blow molding machines require previously produced preforms to be fed into the machine. Separating the processes of bottle and preform production allows for optimized production, increased operational flexibility, and provides higher productivity and yield. MAXIMUM PREFORM DIMENSIONS Neck height: 9–41 mm (measured from the bottom edge of the support ring) Chedpjg Ailcefx Anped Minimum internal neck diameter: 19 mm Maximum external neck diameter: 34 mm Preform support ring diameter: 29–51 mm Maximum preform length: 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter: 130 mm Maximum bottle height: 380 mm Bottle volume: 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (for still and carbonated beverages) 0.25 liter bottle: 14–20 grams 0.50 liter bottle: 20–33 grams 1.00 liter bottle: 26–40 grams 1.50 liter bottle: 35–51 grams 2.00 liter bottle: 44–58 grams 3.00 liter bottle: 68–84 grams BLOW WHEEL Height: 3.5 meters Number of molds: 6 Clamping force: 10 tons Article height (below the neck) at outlet: approx. 1.4 meters Machine DC drive motor power: 4 kW HEATING CONDITIONER Height: 2 meters Number of oven heaters: 10 Number of heating zones per unit: 8 Maximum power: 170 kW ELECTRICAL USAGE Maximum supplied power: 200 kW Average consumption: 100–150 kW/h (varies depending on bottle produced) COMPRESSED AIR Supply pressure: 7–35 bar Operating pressure: 7 bar Flow rate: 50–100 Nm3/h (varies depending on bottle produced) Blowing pressure – champagne base: up to 25 bar Blowing flow – champagne base: 110–550 Nm3/h Blowing pressure – petaloid base: up to 35 bar Blowing flow – petaloid base: 155–770 Nm3/h COOLING WATER Temperature: 10–12°C Pressure: 5–6 bar Flow rate: up to 6 cubic meters/hour Up to 16,000 Kcal/hour heat to be removed WEIGHT Blow wheel with molds: 8 tons Heating conditioner: 2.2 tons Preform feeder: 0.65 tons Control cabinet: 0.85 tons PREFORM HEATING CONDITIONING The preforms are conveyed to the heating conditioning unit with the necks facing upwards. This unit continuously ensures that the preforms are inverted before being presented neck-down in front of the heating modules, and then inverted again. During the heating phase, the preforms are rotated and their necks are protected from heat to optimize temperature distribution without deforming the neck. Heating is achieved through 10 heating modules. Each unit can accommodate up to 8 horizontally arranged infrared lamps, which are air-cooled at the ends. The heating output of 8 zones, corresponding to the 8 lamp rows, is adjustable to optimize the heat profile. These zones are regulated on all SBO models. After heating, preform temperature is monitored by an infrared camera to regulate the controlled zones, ensuring the maintenance of the required temperature.

Kondisi: bekas, Tahun pembuatan: 2011, de-hu-001 Chjdpfx Asxwzb Ijnpod

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, tinggi produk (maks.): 380 mm, diameter benda kerja (maks.): 130 mm, kapasitas produksi: 7.200 unit/jam, TECHNICAL DETAILS Number of cavities: 6 Capacity for standard bottles: up to 7,200 bph (bottles per hour) Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck diameter (internal): 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Feeding guide rail length: 2,000 mm Power supply Total power consumption: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12 °C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Csdpsx A Uu Esfx Anpehd Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Feeding guide rails Adaptable to other voltages on request

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, TRtech Prime 31100 Abkantpresse 1 EUR 52.500,00 Abkantkraft: 100 t Biegelänge: 3.100 mm Ständerweite: 2.600 mm Hub: 265 mm Lichte Weite: 490 mm Ausladung: 410 mm Tischhöhe: 900 mm Tischbreite: 110 mm Eilgang: 120 mm/s Arbeitshubgeschwindigkeit: 10 mm/s Rücklaufgeschwindigkeit: 110 mm/s X-Achse Verfahrweg: 750 mm Motorleistung: 11 kW Breite: 1.780 mm Höhe: 3.960 mm Länge: 2.850 mm Gewicht (ca.): 8.500 kg Achsenanzahl: X, R, Z1, Z2, Y1, Y2 Schutzeinhausung mit Schaltfunktion CNC-gesteuertes hydraulisches dynamisches Bombiersystem Steuerung: STEP Rock 22 Servo-Motor Hinteranschlag: X, R, Z1, Z2 Segmentierte Matrize Segmentierter Stempel Vordere Auflagen (Gleitarme mit T-Nut und Anschlag): 2 Stück Zahlungsbedingungen: PER SWIFT: 40% Anzahlung vorab, Restzahlung vor Verladung. GESAMTSUMME: EUR 52.500,00 Csdpfx Aovd Aavsnpohd Lieferzeit: ab Werk OSM Makina, 12 Wochen nach Auftragseingang STEMPEL UND UNTERSCHRIFT PROFORMA-RECHNUNG Rechnungsempfänger: Frank Pelka Maschinen GmbH Dorfstr. 11 D-57271 Hilchenbach Deutschland