Las Meja

SIEGMUND 8.7 EXTREME 3,0 x 1,5

Kondisi: bekas, Tahun pembuatan: 2008, Used drilling center by CMA Type: TRD 40 CN 9000 Table length: 9000 mm Max. capacity: 40 mm Kedjwc Ndwopfx Ac Hewu Automatic tool changer Year of manufacture: 2008

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Pressing force: 105 t Bending length: 3,100 mm Distance between uprights: 2,600 mm Table width: 100 mm Table height: 750 mm Control: DELEM DA 65 Installation height: 200 mm Working speed: 0 – 10 mm/sec Return speed: 0 – 100 mm/sec Rapid traverse upward max.: 100 mm/sec Voltage: 380 V / 50 Hz Total power requirement: 11 kW Machine weight approx.: 7.5 t Space requirement approx.: 4 x 2.2 x 2.8 m Equipment: - CNC control DELEM DA65 graphic video - Program-controlled backgauge with 2 axes - New lower tool - 2-hand operation / foot switch Kwedsvq R Uuspfx Ac Hsu

Kondisi: diremajakan ulang (bekas), SCHLATTER MG24 Welded Wire Mesh Production Line Completely Refurbished WORKING RANGE Panel width: max. 2,500 mm Cross wire length: min. 900 mm Cross wire length with QF5 distributor: min. 300 – 1,600 mm Maximum spacing between outer longitudinal wires: 2,400 mm Mesh length (longitudinal wire length): max. 2,500 – 6,000 mm Minimum spacing between longitudinal wires: 100 mm Cross wire spacing: 25–250 mm Adjustable via cutting device (0–1) Longitudinal wire diameter: 4.0 – 12.0 mm Cross wire diameter: 4.0 – 12.0 mm Maximum number of longitudinal wires: 24 MG 24.1/8C MESH WELDING MACHINE – Basic configuration including: - 1 Machine base frame - 1 Upper support for reception of press units, continuously adjustable by handwheel - 1 Magnetic support unit with holding magnets and cross wire monitoring - 1 Row of pneumatic solenoid valves for operation of the press units - 1 Air and water installation - 2 Pneumatic rotary drives with oil damping - Static torque with 5 bar compressed air: 480 Nm - Continuously adjustable front section: 25 – 250 mm, adjustable via cutting device (0–1) - 1 Feed trolley with panel lifting device - 1 Tool kit for machine adjustment WELDING SECTION including: 8 Type C transformers Rated power per transformer: 100 kVA Secondary open-circuit voltage: 7.1 V Kedpfx Aowu Tu Dsc Hswu Rated secondary current: 14 kA 8 ES 130 thyristor contactors 12 Welding presses: 5.0 kN 12 Longitudinal wire current bridges for wire spacing: 50–100 mm 12 Longitudinal wire current bridges for staggered wires: 100 mm 10 Longitudinal wire current bridges for wire spacing: 100–150 mm 8 Longitudinal wire current bridges for staggered wires: 150 mm 6 Longitudinal wire current bridges for wire spacing: 150–200 mm 6 Longitudinal wire current bridges for staggered wires: 200 mm 24 Bottom copper electrode holders with standard angled electrodes, each with a water-cooled current cable, width: 58 mm 24 Wire clamping jaws Panel width: max. 2,500 mm Cross wire length: min. 900 mm Cross wire length with QF5 dispenser: min. 300 – 1,600 mm Max. spacing between outer longitudinal wires: 2,400 mm Mesh length (longitudinal wire length): max. 2,500 – 6,000 mm Min. spacing between longitudinal wires: 100 mm Cross wire spacing: 25–250 mm Longitudinal wire diameter: 4.0 – 12.0 mm Cross wire diameter: 4.0 – 12.0 mm Max. number of longitudinal wires: 24

Tahun pembuatan: 2021, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3815407, WEIGHT 8000 KG FEM ISO 1Am M4 POWER 2.4/15.5 kW (50 Hz) Kwjdjt Nhqyopfx Ac Hou MAXIMUM CAPACITY 16 TON

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, We offer for sale a complete multi-point automatic steel wire welding line by SCHLATTER. We have three fully operational production lines available. Kedpfxetvpilj Ac Hjwu Automatic machines for the production of cross wires (so-called straightening and cutting machines) are also available. Additionally, we stock a range of single spot welders for steel wires.

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), A Promecam (Amada) APX 103 CNC press brake is available. Press force: 1000 kN, working width: 3000 mm, distance between uprights: 2550 mm, throat opening: 370 mm, stroke: 100 mm, throat depth: 400 mm, approach speed: 70 mm/s, bending speed: 9 mm/s, return speed: 85 mm/s, drive power: 10.5 kW. Machine dimensions (L/W/H): approx. 3500 mm / 2200 mm / 2300 mm, weight: approx. 6400 kg, control system: Amada Operateur, operating hours: 36,261 h. The press is still in operation, thus the operating hours are continuously increasing. Documentation is available. An on-site inspection is possible. Kjdpfxjwm Nn Ro Ac Hewu

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, jenis pendinginan: air, EN_FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius VR 4000 wire feed unit ➤ Fronius intermediate hose package standard from 1.5m ➤ Fronius trolley ➤ Fronius torch package ➤ Ground cable 3-4m ➤ Pressure regulator With this device, almost all materials can be welded, including aluminium, steel, and stainless steel (V2A). It is equipped with filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and applications: This TPS series can easily be connected to a robot. You only need an interface and the corresponding hose package for integration. Optionally, we offer the RCU 5000i control panel, which allows you to create and import characteristic curves, further extending the functions of the TPS unit. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Ksdpfx Aewbh Ifsc Hswu An inspection is possible in Vienna 1230, Austria! ✔ Insured pallet shipping is not a problem! ✔ ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►►What is the condition of the device? For your information, we purchase used equipment in almost-new condition, disassemble them, check everything thoroughly, replace wear parts if necessary, and only release them for sale after successful test welding. "All" devices are clean and have neither burn marks on the displays nor countless burn holes or dents on the machine! You are buying an item from us that is presentable and does not look worn out! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice for intra-community supply within the EU, provided the relevant requirements are met. ►►►What payment options are available? Prepayment or cash on personal pickup ►►►Is insured shipping possible? Yes, we are happy to send your purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately do not have the leeway to offer a warranty. However, the devices can be tested on-site and paid for in cash. ►►►Why buy from us? We are professionals for this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other manufacturers! We know these units inside out and do not sell anything we are not familiar with.

Kondisi: bekas, CNC flame cutting system BACH type ACW 2500 Flame cutting machine with CNC control NBS 400 Machine no. 14 561-06 Year of manufacture: 2006 Cutting area: 2500 x 6500 mm Track length: 8000 mm Track gauge: 3345 mm Kwjdef Ncadepfx Ac Heu Track height: 650 mm 2x machine cutting torches with burn table

Kondisi: baru, de-hu-01 Kedjxaa Nvopfx Ac Hswu

Kondisi: bekas, Combined profile steel shear and punching machine GEKA type HYD 80 / Hydracrop 80/A Mach. no. 9566 Year of manufacture approx. 2000 Punching force 80 tons Throat depth 300 mm Punching up to Ø 40 mm in 14 mm sheet Flat bar shear 450 x 15 mm Angle steel shear 130 x 130 x 13 mm Square shear 45 x 45 mm Round bar shear Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Electrical connection 400 Volt, 50 Hz - Back gauge with electric stroke release 500 mm - Work table with back gauge at punching station 550 x 380 mm - Working height at punching station 1100 mm - Work table with back gauge at rectangular notcher 550 x 400 mm - Working height rectangular notcher 930 mm - approx. 21 various punching tools Kwjdporz Tutjfx Ac Hju - Operating instructions - Original paintwork, not repainted Required space L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons Very good condition