Beli Spit 352 bekas (412)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
Iklan kecil
Jerman
11.122 km
Mesin bor yang sesuai
Spit218 Trockenbauschrauber
Hubungi
Kondisi: bekas, Exhibition machine
Condition: as new
Scope of delivery:
Device case
Device
Operating manual
Dujdpfxoyamc Dj Abhon
Bit
This item is an unused exhibition unit.
Iklan kecil
Jerman
11.122 km
Mesin bor perangkat keras
Spit218 Trockenbauschrauber
Hubungi
Kondisi: bekas, Exhibition machine
Condition: as new
Scope of delivery:
Duodpfx Absv Ntb Iohjn
Device case
Device
Operating manual
Bit
This item is an unused exhibition unit.
Iklan kecil
Berlin
10.805 km
Rig pengeboran hidrolik
Atlas CopcoRocket Boomer 352 S-1838
Hubungi
Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), With DC26 articulated carrier, power output: 108 kW, maximum travel speed: 16 km/h, tire size: 14.00 R24 A, 2x BUT 35 drill booms, Deutz BF4M 1013C diesel generator set, BMH 6414 drill feeds, maximum drill rod length: 4,321 mm, maximum drilling depth: 4,020 mm, HL 210 loading platform, CE-standard, air/water flushing, heat exchanger and Swellex high-pressure pump, without drill hammers.
Dsdpfx Ael Tn Epjbhjun
Iklan kecil
Stabroek
11.433 km
Eksavator perayap
Caterpillar352 FL XE MHD (17m demoliton)
Hubungi
Kondisi: baik (bekas), jenis bahan bakar: diesel, warna: kuning, Tahun pembuatan: 2016, jam operasional: 8.670 h, Perlengkapan: pendingin udara, Technical Information
Track width: 75 cm
Unladen weight: 60,480 kg
Engine make: C13
Functionality
CE marking: yes
Condition
Technical condition: good
Optical condition: good
Identification
Serial number: CAT0352FTSD200228
Additional Information
Stick / bucket arm length: 1,700 cm
Emission level: Stage IV / Tier IV final
Delivery terms: EXW
Transport dimensions (L x W x H): 16.4 x 3.7 x 3.65 m
Country of manufacture: BE
Further information
Please contact Jeroen Heindryckx, Bart Apers, or Matthias Eyckmans for more information.
Dedpfjx Scd Aox Abheun
Iklan kecil
Ahaus
11.235 km
Gergaji bundar aluminium
MEPCOBRA 352 MA 2G
Hubungi
Kondisi: baru, Saw blade diameter 350 x 32 mm
Cutting capacity at 90 degrees: round 120 mm
Cutting capacity at 90 degrees: square 105 mm
Cutting capacity at 90 degrees: flat 180 x 70 mm
Cutting capacity at 45 degrees: round 120 mm left
Cutting capacity at 45 degrees: round 110 mm right
Cutting capacity at 45 degrees: square 100 mm left
Cutting capacity at 45 degrees: square 95 mm right
Cutting capacity at 45 degrees: flat 135 x 60 mm
Saw blade dimensions 350 x 32
Speed 1700 / 3400 rpm
Cutting capacity at 45 degrees: round 120 mm
Total power requirement 1.5 / 2.2 kW
Machine weight approx. 210 kg
Space requirement approx. 1170 x 860 x 1600 mm
Description:
Manual high-performance circular saw for cutting from 45° right to 45° left in aluminium and light metal alloys, with 2 speeds
Equipment:
- With pneumatic clamps
- Saw head can be tilted 45° to one side
- Heavy cast iron construction
- Ensures vibration-free operation and maximum precision
- Head can be additionally tilted up to 45°
- Powerful two-speed drive with double V-belts
- Large bearing-mounted turntable
- Lubrication system with mechanical diaphragm pump
- Suction connection for chip extraction
Scope of delivery:
- Adjustable length stop 600 mm
- Tool kit
- Operating instructions with wiring diagram
- Lifting eyes for transportation
Djdexaai Nopfx Abhjun
* Machine is supplied without saw blade
Optional accessories:
- Including base frame
Iklan kecil
Ahaus
11.235 km
Gergaji bundar aluminium
MEP - VollautomatCOBRA 352 NC 5.0
Hubungi
Kondisi: baru, Saw blade diameter 350 x 32 mm
Cutting capacity at 90°: round 120 mm
Cutting capacity at 90°: square 105 x 105 mm
Cutting capacity at 90°: flat 180 x 70 mm
Cutting capacity at 45°: round 120 / 110 mm
Cutting capacity at 45°: square 100x100 / 95x95 mm
Cutting capacity at 45°: flat 135 x 60 mm
Spindle speed: 1700 / 3400 rpm
Control: MEP CNC
Total power requirement: 2.6 / 3.5 kW
Machine weight approx.: 605 kg
Dimensions (L x W x H): 2210 x 1680 x 2150 mm
Equipment:
- Fully automatic high-performance CNC circular saw
* for cuts from 45° right to 45° left
* designed for aluminium and light alloy materials
- MEP microprocessor control
* Windows “CE” based control system
* User-friendly interface
* Storage capacity for up to 100 cutting programs
* Operator interface with 7” touchscreen display and mechanical keys
* Swiveling control panel
* Display and storage of alarm and error messages
* Saw head positioning and feeder movement via joystick
* Automatic detection of cutting start position
- Material feed with stepper motor and ball screw drive
* Travel: 600 mm
* Repeatable for cutting any length
- Manually operated safety hood
- Mechanical stops at -45°, 0°, +45°
* Enable rapid positioning of the saw head
- Pneumatic vice system
* 2x pneumatic frontal vices
Dsdpfx Aexaa Uxobhsun
* Includes vertical clamp
- Heavy cast iron frame for vibration-free operation & highest precision
- Saw head can additionally tilt up to 45°
- 2 cutting speeds
- Base frame with lockable door
- Coolant system (emulsion oil lubrication)
- Machine base with forklift pockets
- Comprehensive operation manual, maintenance handbook, etc.
Iklan kecil
Ahaus
11.235 km
Gergaji bundar dingin
MEP - HalbautomatTIGER 352 SX EVO
Hubungi
Kondisi: baru, circular saw blade diameter 350 x 32 mm
Cutting capacity at 90°: round 115 mm
Cutting capacity at 45°: round 110 mm
Cutting capacity at 60°: round 90 mm
Cutting capacity at 90°: square 95 x 95 mm
Cutting capacity at 45°: square 95 x 95 mm
Cutting capacity at 60°: square 90 x 90 mm
Cutting capacity at 90°: flat 180 x 95 mm
Cutting capacity at 45°: flat 125 x 95 mm
Djdpjxabd Iefx Abheun
Cutting capacity at 60°: flat 90 x 90 mm
Speed: 15 / 30 / 45 / 90 rpm
Control: MEP NC
Total power requirement: 1.8 / 2.5 kW
Weight: 410 kg
Dimensions (LxWxH): 2050 x 1050 x 1120 mm
Equipment / Description:
- NC electro-pneumatic semi-automatic (INDUSTRIAL version)
* for mitre cuts from 45° right to 60° left
- MEP NC control system with soft-touch keypad
* equipped with backlit display
- The saw head moves on preloaded linear guides
. mounted on a robust cast steel column
- The powerful 2-speed gearbox is specifically designed for cutting
. solid materials
- Four blade speeds are available
- for optimal adjustment to the material
- Large bearing-mounted rotating table with internal table clamping &
. precision stops at 0/45/60° allow fast adjustment
. for mitre cuts
- Pneumatic vice
* equipped with bolted vice jaws
* serrated jaws ensure optimal clamping of the workpiece
- Machine base with lockable door, swarf drawer, and removable
. coolant tray with electric coolant pump
- Swarf removal brush
- Adjustable length stop 600 mm
- Detailed operating and maintenance manuals
- Circuit diagrams and exploded views
- Lifting lugs for transport
* Machine is supplied without saw blade
Iklan kecil
Ahaus
11.235 km
Gergaji bundar aluminium
MEP - HalbautomatCOBRA 352 SX EVO
Hubungi
Kondisi: baru, Saw blade diameter 350 x 32 mm
Cutting capacity at 90 degrees: round 120 mm
Cutting capacity at 90 degrees: square 105 x 105 mm
Cutting capacity at 90 degrees: flat 180 x 70 mm
Cutting capacity at 45 degrees: round 120 / 110 mm
Cutting capacity at 45 degrees: square 100 x 100 / 95 x 95 mm
Cutting capacity at 45 degrees: flat 135 x 60 mm
Blade speed: 1,700 / 3,400 rpm
Control system: MEP NC
Total power requirement: 1.5 / 2.2 kW
Machine weight: approx. 290 kg
Dimensions L x W x H: 1,240 x 1,360 x 1,800 mm
Equipment:
- NC semi-automatic high-performance circular saw
* for cuts from 45° right to 45° left
* suitable for aluminium and light metal alloys
- MEP microprocessor control
* user-friendly interface with display and mechanical keys
* start and end positions of the saw head can be saved
- Manually opening safety hood
- Mechanical stops at -45°, 0°, +45°
* enable quick positioning of the saw head
- Pneumatic quick-release vice
* pneumatic clamping system allows for adjustable clamping pressure
* depending on material hardness
* optional pneumatic vertical vice available
- Heavy cast iron construction ensures vibration-free operation and highest precision
- Saw head can be additionally tilted up to 45°
- Two saw blade speeds
- Base frame with lockable door
- Pneumatic coolant/lubrication system
- Machine base
Scope of delivery:
- adjustable length stop, 600 mm
- tool kit
Dujdpoxaa Hnefx Abhsn
- adapter for infeed roller conveyor including 1 supporting roller
- tool kit
- comprehensive operating and maintenance manual, etc.
- Machine is supplied without saw blade!
Iklan kecil
Ahaus
11.235 km
Gergaji bundar dingin
MEPFALCON 352
Hubungi
Kondisi: baru, Saw blade diameter 350 x 32 mm
Cutting capacity at 90 degrees: round 115 mm
Cutting capacity at 90 degrees: square 100 mm
Cutting capacity at 90 degrees: flat 130 x 80 mm
Cutting capacity at 45 degrees: round 100 mm (left)
Cutting capacity at 45 degrees: round 75 mm (right)
Blade speed 30 / 60 rpm
Saw blade dimensions 350 x 32 mm
Machine weight approx. 220 kg
Features:
- Robust cast iron construction
- Gearbox with bronze gear and ground/hardened steel worm in special oil bath
- Vice with counter-clamping device for double workpiece clamping
- Electric coolant pump for saw blade cooling and lubrication
Scope of delivery:
- Adjustable length stop 600 mm
- Tool kit
- Detailed operating manual, maintenance handbook
- Wiring diagrams and exploded views
- Lifting eyes for transport
Djdpfx Asxabnmjbhjun
* Machine is supplied without saw blade
Included special accessories:
- Base cabinet with door (steel stand)
Iklan kecil
Dorfen
10.954 km
Forklift
LindeH80 T (352)
Hubungi
Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2004, jam operasional: 6.700 h, kapasitas angkut: 8.000 kg, jenis bahan bakar: gas, produsen motor: Perkins, Tersertifikasi DGUV hingga: 07/2026, berat kosong: 12.500 kg, tinggi total: 3.800 mm, Linde H80T in good condition for sale as shown in the photos.
Verifiably only 6,700 operating hours!
This is one of the last models without extensive electronics, etc. (Perkins engine).
- Load capacity: 8,000 kg
- Own weight: 12,540 kg
Dsdjw Eyb Sopfx Abhoun
- 3rd and 4th hydraulic control circuits up to the fork carriage available
- Valid UVV inspection sticker
- Year of manufacture: 2004
- Overall height approx. 380 cm (mast can be tilted forward for transport or fully dismantled upon request)
If you have any questions, please feel free to contact me at any time.
Iklan kecil
Iași
9.805 km
Pengumpan batang
TOP AutomazioneFU 352
Hubungi
Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: BF15063530, Caracteristici tehnice:
Specificații principale
Diametru bară (Rotund): 6 mm – 50 mm
Diametru bară (Hexagonal): 6 mm – 45 mm
Diametru bară (Pătrat): 6 mm – 37 mm
Lungime bară acceptată: 1200 mm – 3200 mm
Viteză maximă de alimentare: 30 m/min
Lungime maximă rest: 300 mm
Presiune aer necesară: 6,5 – 7,5 bar
Tensiune de operare: 230V / 50 Hz
Greutate: 1200 kg
Design & Dotări
Canal de ghidare: Interșanjabil manual, din plastic tip Vulkollan pentru rotații de bare la viteză înaltă.
Suport frontal reglabil: Schimbabil din 5 în 5 mm pentru o susținere optimă a barei.
Gestionarea resturilor: Extractare posterioară cu extractor autocentrant sau evacuare frontală.
Sistem de repoziționare: Opțional, cu șină pentru deplasare axială sau radială până la 600 mm pentru deservirea strungului.
Dusdoxx R Nqepfx Abhjn
Automatizare: Complet gestionată PLC, cu motor fără perii (brushless) și electrovalve pneumatice digitale pentru controlul vitezei și forței de avans.
Magazie pentru bare: Magazie pe un singur nivel, capacitate portantă 235 mm.
# Împingător de bare: TOP Automazione model FU 352
Dimensiuni
# Împingător de bare (L×l×h): 3500 × 800 × 1200 mm ; Greutate: 1200 kg
Caracteristici principale și capabilități:
# Controller HMI digital pentru operare manuală
Stare utilaj:
FUNCȚIONAL
# Setul de ghidaje și accesorii de prindere bare uzate
# Setul de rulmenți pentru capul împingător uzat
Iklan kecil
Iași
9.805 km
Pengumpan batang
TOP AutomazioneFU 352 sx
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: BF17034613, Technical characteristics:
Specificații de bază:
- Diametru bară (rotundă): 6 mm – 50 mm
- Diametru bară (hexagonală): 6 mm – 45 mm
- Diametru bară (pătrată): 6 mm – 37 mm
- Lungime bară acceptată: 1.200 mm – 3.200 mm
- Viteză max. alimentare: 30 m/min
- Lungime max. rest: 300 mm
- Presiune aer necesară: 6,5 – 7,5 bar
- Tensiune de operare: 230V / 50 Hz
- Greutate: 1.200 kg
Design și facilități:
- Canal de ghidaj: interschimbabil manual, din material plastic de tip Vulkollan, pentru rotație de mare viteză a barelor
- Bloc de susținere frontal: interschimbabil la fiecare 5 mm pentru suport optim
- Gestionare resturi: extracție posterioară prin extractor autocentrant sau evacuare frontală
- Sistem repoziționare: sistem opțional pe șină, permite deplasare axială sau radială de până la 600 mm pentru deservirea strungului
- Automatizare: control integral prin PLC cu motor brushless și valve pneumatice digitale pentru controlul vitezei și forței de avans
- Depozitare bare: magazie pe un singur nivel cu capacitate de 235 mm
# Alimentator de bare: TOP Automazione, model FU 352
# ALIMENTATOR SEMIAUTOMAT PENTRU ÎNCĂRCARE ORIZONTALĂ LA STRUNG (AUTONOMIA VARIAZĂ ÎN FUNCȚIE DE DIAMETRUL BARELOR)
Dimensiuni:
Dusdpfexx Sclox Abhjn
- Alimentator de bare (L×l×h): 3500 × 800 × 1200 mm
- Greutate: 1.200 Kg
Caracteristici principale și capabilități:
- CONTROLER DIGITAL CU INTERFAȚĂ HMI PENTRU OPERĂRI MANUALE
Stare utilaj: FUNCȚIONAL
Iklan kecil
Iași
9.805 km
Pengumpan batang
TOP AutomazioneFU 352 sx
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: BF17034612, Technical characteristics:
Core Specifications
Bar Diameter (Round): 6 mm – 50 mm
Bar Diameter (Hexagonal): 6 mm – 45 mm
Bar Diameter (Square): 6 mm – 37 mm
Bar Length Options: 1200 mm – 3200 mm
Max Feed Speed: 30 m/min
Max Remnant Length: 300 mm
Air Pressure Required: 6.5 – 7.5 bar
Operating Voltage: 230V / 50 Hz
Weight: 1200 kg
Design & Features
Guide Channel: Manually interchangeable, manufactured from Vulkollan-type plastic for high-speed bar rotation.
Front Steady Block: Interchangeable every 5 mm to ensure optimal bar support.
Remnant Management: Offers rear extraction via a self-centering extractor or front ejection.
Repositioning System: Optional rail system enables axial or radial displacement up to 600 mm to facilitate lathe servicing.
Automation: Fully PLC-controlled, equipped with a brushless motor and digital pneumatic valves for precise speed and thrust regulation.
Bar Storage: Single-level magazine with a 235 mm loading capacity.
Bar Feeder: TOP Automazione, Model: FU 352 SX
SEMIAUTOMATIC BAR FEEDER FOR HORIZONTAL LOADING TO LATHE (AUTONOMY DEPENDS ON BAR DIAMETER)
Dimensions
Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg
Main Features and Capabilities:
HMI DIGITAL CONTROLLER FOR MANUAL OPERATIONS
Dujdpfjxx Sfasx Abhen
Machine Status:
IN OPERATION
Iklan kecil
Ahaus
11.235 km
Gergaji bundar dingin
MEPTIGER 352 - 4 GESCHW.
Hubungi
Kondisi: baru, Saw blade diameter 350 x 32 mm
Cutting range at 90°: round 115 mm
Dodpfexaab Sex Abheun
Cutting range at 90°: square 95 x 95 mm
Cutting range at 90°: flat 180 x 95 mm
Cutting range at 45°: round 110 mm
Cutting range at 45°: square 95 x 95 mm
Cutting range at 45°: flat 125 x 95 mm
Cutting range at 60°: round 90.0 mm
Cutting range at 60°: square 90 x 90 mm
Cutting range at 60°: flat 90 x 90 mm
Speed 15 / 30 / 45 / 90 rpm
Total power requirement 1.8 / 2.5 kW
Machine weight approx. 375 kg
Dimensions (LxWxH) 1000 x 1100 x 1870 mm
Features / Description:
- Manual high-performance vertical circular saw
- Suitable for cuts from 45° right to 60° left
- Saw head guided on pre-tensioned linear rails along a robust cast steel column
- Sturdy 2-speed gearbox, specially designed for solid material cutting
- Four available blade speeds for optimal adjustment to the workpiece material
- Large, mounted rotary table with internal table clamping and precision stops at 0/45/60° for quick miter adjustment
- Quick-release vice with bolt-on, serrated jaws for secure clamping of the workpiece
- Base frame with lockable door, chip drawer, and removable coolant tray with electric coolant pump
- Chip removal brush
- Adjustable length stop 600 mm
- Comprehensive operating instructions, maintenance manual
- Circuit diagrams and exploded view drawings
- Lifting eyes for transportation
* Machine is supplied without saw blade
Iklan kecil
Remscheid
11.245 km
Unit kendali
Süd - Electric Lüftermotor Typ EL 352 SN: 606272
Hubungi
Kondisi: siap digunakan (bekas), Süd - Motor kipas listrik tipe EL 352, 110 V, 2,4 A, 50Hz, nomor seri: 606272, bekas, ada tanda-tanda pemakaian normal, 100% berfungsi, pengiriman sesuai foto.
Dusdpfx Ajx Dwdxobhen
Iklan kecil
Kanal
10.876 km
Gergaji bundar untuk logam ringan dan aluminium
MEPCOBRA 352 NC 5.0
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Used automatic circular saw for aluminium MEP Cobra 352 nc 5.0
Dusdpfx Abjwu Tz Rjhon
Year: 2017
Blade dimensions: 350x32x3.4mm
Blade speed: 1700/3400 rpm
Mitre angle: from -45° to +45°
Cutting capacity at 0°: round: 120mm, square: 105mm, rectangle: 180x70mm
Touchscreen display
Machine weight: 605kg
Iklan kecil
Maasmechelen
11.351 km
Meja pemotong kaca
Bottero352 BCS-J
Hubungi
Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: GG60SB-13594, lebar total: 4.030 mm, panjang total: 7.000 mm, berat keseluruhan: 2.500 kg, arus masuk: 11 A, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, frekuensi input: 50 Hz, panjang pemakanan sumbu X: 3.300 mm, panjang umpan sumbu Y: 6.100 mm, tekanan: 8 batang, panjang pemotongan (maks.): 6.100 mm, Meja pemotong float Bottero (bentuk) 2-19mm, ukuran potong maksimum L6100x3300mm
Dimensi: L7000xW4030mm, berat +/-2500Kg
Djdpfoxrmpmex Abhjun
Iklan kecil
Burgdorf
11.027 km
Gepulster Nd:YAG-Laser
LasagFLS 352 N / BAK 4
Hubungi
Kondisi: bekas, Fungsionalitas: belum diuji, Tahun pembuatan: 2003, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, lasag-fls-352n-bak4-01
Dusdpfx Aboxxbrvohen
Iklan kecil
Susuz
9.332 km
Ember
Caterpillar352 General Purpose Bucket
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Benna universale CAT345/349/350/352 disponibile in magazzino
Djdpjwy Dnxjfx Abhsun
Iklan kecil
Concordia Sagittaria
10.941 km
Mesin potong semi-otomatis MEP
MEPTIGER 352 SX EVO
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, MESIN POTONG CAKRAM SEMI OTOMATIS MEP TIGER 352 SX EVO
Dusdpsxdr Rtefx Abhen
- Putaran pisau pada 4 kecepatan (15/30/45/90 rpm)
- Meja putar terpasang pada poros tengah dan bantalan aksial
- Gerak maju kepala potong pada dua rel linier
- Batas mekanis pada -45°, 0°, +45°, dan +60° dengan perangkat pengunci di setiap posisi
- Antarmuka pengguna dengan layar
Iklan kecil
Böblingen
11.175 km
Gergaji potong silang aluminium MEP COBRA 352 SX EVO
MEPCOBRA 352 SX EVO Aluminiumkreissäge
Hubungi
Kondisi: baru, MEP COBRA 352 SX evo [Semi-Automatic]
Article Number: CB352SX
Motor Power: 1.5 / 2.2 kW
Vise Opening: 180 mm
Blade Dimensions: 350 x 32 x 3.4 mm
Djdpjchkv Ijfx Abhoun
Weight: 285 kg
Speed: 1700 / 3400 rpm
Cutting Capacity at 0°: 120 / 105 / 180x70 mm
Cutting Capacity at 45° right: 120 / 100 / 135x60 mm
Cutting Capacity at 45° left:
Cutting Capacity at 60° right:
Cutting Capacity at 60° left:
Description
Semi-automatic circular saw for cutting solid and hollow aluminium materials and light alloy metals, equipped with an electrowelded carbide-tipped saw blade.
Standard Equipment:
- Machine designed for mitre cuts from 45° right to 45° left.
- Head tilting allows for cut processing anywhere between 0° and 45° to the left.
- MEP presents its latest generation control unit for semi-automatic machines, featuring single-axis microprocessor control.
- OPERATING CYCLE: At the beginning of each cycle – Vice closes, motor starts, saw head lowers for cutting, motor stops, saw head lifts, vice opens.
- NEW – 16-character, 2-line display provides technical parameters such as: number of cuts performed, cutting time, ammeter, and over 100 diagnostic messages and warnings.
- NEW – Event display and logging of alarm and error messages, with the option to review incidents.
Electrical Equipment:
- NEW – Low-voltage control panel: Polyester membrane keypad with thermoformed, raised buttons and operation control signal.
- Saw bow stroke can be programmed directly from the control panel for adaptation to material size.
- Ball-bearing rotary table ensures smooth and precise positioning.
- Clamping system with two end-positioned vices, freely adjustable along the longitudinal axis of the part.
- Adjustable mechanical stops for quick head positioning at angles of 0° and 45° right and left.
- Chip remover prepared for optional extraction system.
- Automatic saw blade lubrication system, activated only at cutting start.
- Machine supplied without saw blade.
- Ready for installation of minimum-quantity lubrication kit for saw blade (optional), as well as standard coolant-based lubrication.
- Includes tool kit, user manual, and spare parts list.
For further technical data, please refer to the attached PDF document (Catalogue, p. 2).
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Böblingen
11.175 km
Gergaji bundar dingin
MEPTIGER 352 NC 5.0
Hubungi
Kondisi: baru, MEP TIGER 352 NC 5.0 [Fully Automatic]
Article number TI352NC
Motor power 3.0 kW
Vice opening 190 mm
Blade dimensions 350x32x2.5 mm
Weight 680 kg
Cutting speed 15 - 90 m/min
Cutting capacity 0° 115 / 95 / 180x95 mm
Cutting capacity 45° right 110 / 95 / 125x95 mm
Cutting capacity 45° left -
Cutting capacity 60° right -
Cutting capacity 60° left -
Description:
Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed to make serial cuts from 60° left to 45° right on steel. The machine also operates in a semi-automatic cycle. Fully CNC-controlled automatic machine featuring a multiprocessor and two axes controlled by the latest generation MEP controller, allowing up to 1000 different cutting programs to be configured for the same material thickness, each with its own cutting length and quantity.
FEATURES:
- New centralized control console on an articulating arm, enabling operators to easily access the emergency stop from any working position.
- NEW: Fieldbus communication system (Modbus protocol) with dual microprocessor and serial port.
- Display: 20 characters x 4 lines showing the following technical parameters: + saw blade speed + number of programmed and completed cuts + blade thickness + feed length + cutting time + ammeter + display of over 100 diagnostic messages and warnings.
- NEW: Display and logging of alarm and error messages, with the ability to review incidents.
- NEW: 600 mm material feed with stepper motor and precision ball screw mounted on opposing ball bearings.
- NEW: Electronic inverter for continuous blade speed regulation from 15 – 90 rpm (optionally 30 – 150 rpm).
- NEW: Low-voltage control panel: polyester membrane keypad with thermoformed, raised buttons and actuation control signal.
- Dual gear set for high sawing performance.
- Saw head operates on double linear ball guides.
Dodpfxschhhde Abhoun
- Coaxial cylinder with bypass valve for rapid approach and a potentiometric linear transducer for head position detection.
- Programmable saw bow stroke directly from the control panel to accommodate material height.
- Adaptive control of cutting force.
- Rotary table with central pin and axial bearing for precise miter cuts.
- Pneumatic vertical vice.
- Electric coolant pump for blade cooling and lubrication.
- Swarf removal brush.
- Signal lamp for program completion or emergency stop.
- HSS saw blade Ø 350 x 32 x 2.5 mm for solid and sectional material.
- Prepared for installation of a minimum quantity lubrication system (OPTIONAL), in addition to the standard emulsion oil lubrication system supplied.
Please refer to the attached PDF for further technical specifications.
Iklan kecil
Böblingen
11.175 km
Gergaji bundar dingin
MEPFALCON 352 Kreissäge
Hubungi
Kondisi: baru, c7c13e8b-8bae-47fd-b2b1-40259adfc0c1
Dedecgrkyjpfx Abhoun
Iklan kecil
Böblingen
11.175 km
MEP COBRA 352 MA gergaji bundar aluminium
MEPCOBRA 352 MA Aluminiumkreissaege
Hubungi
Kondisi: baru, MEP COBRA 352 MA
Article Number: CB352MA
Motor Power: 2.2 kW
Vice Opening: 180 mm
Blade Dimensions: 350x32x3.4
Weight: 210 kg
Speed: 1700/3400 rpm
Cutting Area 0°: 120 / 105 / 180x70
Cutting Area 45° right: 120 / 100 / 135x60
Cutting Area 45° left:
Cutting Area 60° right:
Cutting Area 60° left:
Description:
Manual circular saw for cutting aluminium, capable of mitre cuts from 45° right to 45° left, with a saw head that swivels from 0° to 45° to the left. On the Cobra 352 MA (automatic vice), the vices close automatically when the saw head is lowered.
Standard Equipment:
- Roller-bearing turntable for quick and precise mitre adjustment
- Screw locking to fix the saw head in any angular position
- Automatic saw blade lubrication system
- Clamping system with two vices
- Saw head locking in the upper position
- Adjustable length stop for repetitive cuts of equal length
- Vice opening 180 mm
- Includes tools and operating manual
Electrical Equipment:
- Control panel
- Marked cable connections
- Power-on indicator light
- Main safety switch
- Emergency stop button
- Speed selector switch
- Thermal-magnetic protection
- Undervoltage release
- Handle switch with IP 55 protection rating
Dodechku Sjpfx Abhsun
- Low voltage system 24 volts
- Motor 1.5/2.2 kW – 400 volts
Please refer to the attached PDF document for further technical details.
Iklan kecil
Böblingen
11.175 km
MEP COBRA 352 NC 5.0 Gergaji
MEPCOBRA 352 NC 5.0
Hubungi
Kondisi: baru, MEP COBRA 352 NC 5.0 [Fully Automatic]
Article Number CB352NC 5.0
Motor Power 2.6/3.5 kW
Vise Opening 180 mm
Band Dimensions 350x32x3.4 mm
Weight 600 kg
Speed 1700/3400 rpm
Cutting Capacity 0° 120 / 105 / 180x70 mm
Cutting Capacity 45° right 120 / 100 / 135x60 mm
Cutting Capacity 45° left
Cutting Capacity 60° right
Cutting Capacity 60° left
Description
Mitre cutting automatic saw with semi-automatic function for cutting aluminium and light metal alloys. Mitre cuts from 45° right to 45° left, with the saw head swivelling 0°-45° to the left.
Control is via multi-microprocessor units, while two NC-controlled axes allow up to 1,000 different cutting programs to be stored, each with variable quantities and lengths, for the same material.
-New centralized control panel on an articulated arm, allowing operation from any working position and immediate access to the emergency stop at all times.
-Fieldbus communication system with dual microprocessor and serial port.
-Display with 20 characters x 4 lines for real-time indication of the following technical parameters: number of programmed and completed cuts, saw blade thickness, feed length, cutting time, ammeter, and over 100 diagnostic messages and warnings.
-New – Alarm and error message logging with event history display. New – 600 mm material feed with drive motor and ball screw, mounted on opposing ball bearings.
-New – Low-voltage control panel: Membrane keypad made of polyester with thermoformed, raised buttons and activation LED.
-Stroke of saw bow programmable directly from the control panel to adapt to cutting material.
Duedjchkwhepfx Abhjn
-Ball bearing mounted turntable for easy and precise rotation.
-Clamping system with two front-end vises, positionable along the length of the part.
-Adjustable mechanical stops for rapid head positioning at 0 and 45 degrees both left and right.
For further technical data, please refer to the attached PDF document (page 3 of the catalog excerpt).
Kami memudahkan pencarian untuk Anda: "spit 352"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.















































































































