Gunting bekas

Sierra T 650 SL

Tahun pembuatan: 2017, Kondisi: siap digunakan (bekas), Material throughput: LDPE: 110kg/h, PA6.0/LDPE/EVOH: 150kg/h, PP/PA6.0/LDPE/EVOH: 135kg/h, PA6.0/LDPE: 120kg/h, EVA/LDPE: 150kg/h. Rated power: 77kW, PCU power: 30kW, extruder power: 18.5kW, motor power: 10.7kW, heating zones: 1, heating power: 12kW. Documentation available. An on-site inspection is possible. Hfjdpewty Hkjfx Ahneh

Kondisi: baik (bekas), Tahun pembuatan: 2002,

Kondisi: baru, Klanke Supercut roll splitter for efficient shredding of waste rolls. Features: - Automatic safety interlock Hjdpfx Ajn I Rgpohnefh - Emergency stop pull cord - Siemens PLC Technical specifications: Blade length: 3000 mm Cutting channel opening: 1200 mm Motor power: 15 kW Cutting force: 50 t Made to order Price and further information upon request. We would be pleased to provide you with a non-binding offer.

Kondisi: sangat baik (bekas), Produsen: Strautmann Tipe: PP 1207 Plus Hfjdpfxov Aiyme Ahnoh Ukuran bal (PxLxT): 1200 x 1100 x 730 mm Berat bal: sekitar 400 - 500 kg Dimensi luar (PxLxT): 1850 x 1047 x 3079 mm Tinggi transportasi: 2500 mm Lubang pengisian: 1190 x 600 mm Tekanan pengepresan: 59 ton / 580 kN Kapasitas: 1 - 2 bal/jam Jumlah ikatan: 4 Berat mesin pres: 2300 kg Daya listrik: 400 V / 50 Hz Daya terpasang: 4 kW Lokasi instalasi: atap dalam/luar ruangan Tingkat kebisingan: kurang dari 80 dB(A) Tahun produksi: 2003-2005 Saya juga memiliki baler Strautmann PP 1207 tahun 2009-2011 harga 5.500 euro Juga tersedia baler Strautmann PP 1208 tahun 2014-2015 Strautmann AutoLoadBaler tahun 2018 harga 7.500 euro

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, tahun perombakan terakhir: 2025, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Hfjdjvf E Avopfx Ahnoh Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: baru, Tahun pembuatan: 2025, DIE MASCHINE IST BRANDNEU Die Maschine eignet sich zum Verpressen von Aluminium- und Stahlblechdosen mit einer Materialstärke von bis zu 0,2 mm und einem Volumen von bis zu 3 Litern. Sämtliche Elektro- und Elektronikkomponenten stammen von Schneider und Siemens. Die Maschine ist vollautomatisch und verfügt über eine SPS-Steuerung sowie ein Siemens HMI Simatic Touchpanel mit Not-Aus-Tastern. Die Maschine wird mit einer Garantie von AYMAS Makina San. Ve Tic. A. S. für ein (1) Jahr oder zweitausendfünfhundert (2.500) Betriebsstunden – je nachdem, was zuerst eintritt – ausgeliefert. Je nach Einsatzgebiet ist eine Öl-Kühl-/Heizanlage vorhanden. Optional ist ein MB 500 Magnetabscheider sowie ein VH (120-250) Vibrationsdosierer erhältlich. Diese ermöglichen die Separierung von Aluminium- und Stahldosen sowie die Abscheidung von Staub- und Schmutzpartikeln im Schrott. Technische Daten: Ballengröße: 500 mm x 330 mm x ... Behältermaß (B x L x H): 500 mm x 1.000 mm x 330 mm Leistung: Bis zu 1.000 kg/h (Aluminium) Bis zu 2.000 kg/h (Stahl) Ballengewicht (mechanische Waage): 10–20 kg Taktzeit: 30 Sekunden Deckelzylinderkraft: 25 Tonnen Hauptpresszylinderkraft: 100 Tonnen Arbeitsdruck: 225 bar Maschinenabmessungen (B x L x H): 1.100 mm x 4.200 mm x 2.600 mm Hodpfx Asrc Dkqehnefh Elektromotor: 18,5 kW Maschinengewicht: 5.000 kg

Kondisi: baik (bekas), Tahun pembuatan: 2005, Ekskavator CASE WX125 no. HHCWX125N5LB00688 Tahun 2005 86 kW 9786 jam satu bucket berat 13 ton Hsdpfxsx Atlio Ahnefh Tanpa dokumen

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 5 kW (6,80 hp), jenis bahan bakar: listrik, berat kosong: 4.200 kg, Tahun pembuatan: 2024, filling hopper with discharge chute hopper capacity 10.5 m³ S355 / St52-3 vibrating chute with 10mm Hardox 450 wear plate Hfjdpfx Ajuqynmehneh chute fully stress-relieved annealed 2 x unbalanced motors 2.5 kW each NEW

Kondisi: baru, Tahun pembuatan: 2022, Shear; Suitable for use with: construction machinery Hfedpopa Rpbofx Ahnsh

Kondisi: siap digunakan (bekas), HSM VK 42/1200 fully automatic baler Pressing force: 42 tons Bale dimensions: 700 x 800 x 600 - 1200 mm Hodpora Nrxjfx Ahnsfh Bale weight: approx. 450 kg Baler length: approx. 7 meters Baler weight: approx. 6,000 kg Automatic 4-fold wire tying