Pemuatan Panel SIRIO - Pemuat

SIRIO

Kondisi: bekas, Tahun pembuatan: 2005, Overview These 8 isobaric pressure tanks (each with a capacity of 500 hl), manufactured in 2005 by Sirio Aliberti, originate from the wine industry and were previously used for sparkling wine production. With an operating pressure of up to 6 bar and full insulation, these tanks are ideally suited for the fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and similar products. The tanks are constructed from carbon steel with a food-grade epoxy coating on the interior, combined with polyurethane insulation and an external stainless steel cladding. This design offers a traditional and cost-effective alternative to stainless steel tanks, which became the industry standard in later years. Thanks to their large volume and isobaric properties, these tanks are particularly well-suited for high-throughput production environments. As with all epoxy-coated vessels, regular inspection and renewal of the internal coating is required, depending on operating conditions. TECHNICAL DATA Manufacturer: Sirio Aliberti Year of manufacture: 2005 Quantity: 8 units Type: Isobaric pressure vessel Application: Fermentation, maturation, storage of carbonated beverages Capacity: 500 hl per tank Material: - Base: Carbon steel - Internal coating: Food-grade epoxy resin - Insulation: Polyurethane - Outer cladding: Stainless steel sheet Operating pressure: 6 bar Dimensions (per tank): Lrsdpfx Apjy Hkkaeton - Internal diameter: approx. 3,200 mm - External diameter: approx. 3,450 mm - Cylinder height: approx. 5,250 mm - Foot height: approx. 1,200 mm - Overall height: approx. 7,800 mm

Tahun pembuatan: 1977, Kondisi: diremajakan ulang (bekas), I am selling a Rapid DGS double mitre saw, year of manufacture 1977. Swivel heads. Ledpfx Ajd N Rb Dsptorn Drilling heads on each side at the front included. Very good condition. Available immediately.

Kondisi: sangat baik (bekas), O04024) AUTOMATIC SHEET STORAGE SYSTEM for PANELS – SIRIO Total space requirement (incl. panel saw): approx. 10,000 mm x 47,000 mm Lodowrz Dbspfx Aptorn Movable upper gantry (on the X-axis) with movable carriage (on the Y-axis) and associated vacuum suction unit (movable on the Z-axis) Max. speed of movable upper gantry (X-axis): approx. 150 m/min Carriage travel speed (Y-axis): approx. 150 m/min Vacuum suction unit travel speed (Z-axis): approx. 60 m/min Vacuum suction unit assembly, rotatable by 90° Automated management system (via scanner) for cut panels (even if they remain in storage) O04025) PANEL SAW with rear lift table, Model FH6 430 MCS Evolution control. SIEMENS WinAC RTX software No. 1 rear pusher Programmable split pusher – DUPLUS2. No. 12 clamps Max. cutting length (mm): 4300. Usable pusher stroke (mm): 4300. Max. saw blade projection (mm): 135 Scoring saw (max. blade diameter): 200 mm Main saw (max. blade diameter / power): 460 mm / 21 kW Adjustable feed speed of the saw carriage (m/min): 1 – 150 No. 4 front air flotation tables Total connected load (kW): approx. 33

Kondisi: sangat baik (bekas), EN: FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGEBANDING AND FORMATTING LINE Consisting of the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (RIGHT) FORMATTING AND EDGEBANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Lsdpfx Apskt Uuastsrn Roll material (edges) thickness (min/max) mm 0.3 / 3 Control / Software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 Jointing cutters with CNC-controlled 08.378 (4 motors x kW 4.5) Glue application unit (hot melt glue + pre-melter) VTG + 283.205 Edge magazine for rolls (No. 24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x kW 0.2) 0°-25° Pre-milling unit 08.055.0.1680 (1 x kW 0.85) Multiple profile milling unit (CNC-controlled) 08.0587 HS/LS1 (2 x kW 1) Contour milling unit (for fine trimming) CNC-controlled KFA x20 (1 x kW 0.5) 20 m/min Multiple profile scraper unit (CNC-controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x kW 0.18) No. 3 Universal milling units for grooving/rabbetting and profiling 08.190 (3 x kW 4.5) CNC-controlled – 90°/180°/270° M.03) LOADING AND STACKING SYSTEM "SIRIO" FR: LIGNE FLEXIBLE DE PRODUCTION PAR LOT-1 ET D'ENCOLLAGE/USINAGE DE CHANTS UNILATÉRALE Composée des machines suivantes : M.01) TABLE D'ALIMENTATION ET SYSTÈME AUTOMATIQUE DE RETOUR DES PIÈCES "SIRIO" BATCH SIZE ONE M.02) ENCOLLEUSE/USINEUSE DE CHANT UNILATÉRALE (droite) "IMA" Novimat I/R75/690/R3 Épaisseur panneau (min/max) mm 8 / 60 — Largeur de travail (min/max) mm 200 / 1300 Matériel rouleau (chants) épaisseur (min/max) mm 0,3 / 3 Commande / logiciel : ICOS Open (Batch Size One) Vitesse d'avance (réglable) m/min 6 – 30 Système d'introduction automatique de panneaux en mode format A1 / 15 N° 2 agrégats d'affleurage avec CN 08.378 (4 moteurs x kW 4,5) Unité d'encollage (colle hot-melt + prémélangeur) VTG + 283.205 Magasin pour chants en rouleau (N° 24 positions) Unité de coupe-anglet terminale 08.42 / 30 / B / LS1 (2 x kW 0,2) 0°-25° Unité de pré-fraisage 08.055.0.1680 (1 x kW 0,85) Agrégat multifraise profil (CN) 08.0587 HS/LS1 (2 x kW 1) Unité de fraisage de contour (pour finition) CN KFA x20 (1 x kW 0,5) 20 m/min Agrégat racloir multi-profil (CN) 08.516 HS/LS1 Agrégat à racloir plat 08.521 Unité de polissage 08.617-2 (2 x kW 0,18) N° 3 agrégats universels pour rainurage, feuillurage et usinage de profil 08.190 (3 x kW 4,5) CN — 90°/180°/270° M.03) SYSTÈME D'ALIMENTATION ET DE GERBAGE "SIRIO"

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Andritz Paladin 600B bekas Termasuk sekrup pengumpan dan mixer kombinasi berbahan stainless steel, 2x motor 55kW, motor lain atas permintaan Bagian dalam telah diperiksa 2 tahun lalu Ledpox N T Uasfx Aptsrn Termasuk rangka untuk penggantian rol dan cetakan

Kondisi: bekas, Fungsionalitas: belum diuji, Kode Ferwood: RU0008671 - Dimensi 6500x1100x250 mm - Rol L=600 mm - Kondisi: Bekas - Fungsi: Belum diuji - Mesin Kompatibel: Otomasi Pemuatan dan Pembongkaran HOMAG - BIESSE - SCM - IMA. Jika tertarik, kami menawarkan layanan revisi, silakan hubungi kami. Ledpfx Apjv Hglzotern

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800 rpm. An on-site inspection is possible. Lodpfx Apswu Ez Notsrn

Kondisi: bekas, Tahun pembuatan: 2004, Sato cutting machine for sale Lrjdpfxovx N I Ns Aptsn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25,000-liter mixing tanks, one casting robot, and two release agent robots is available. Output: 225 tons/24h, mold carriers: 42, mixing positions for additive mixing: 10, mixing head type: MQ, max. operating pressure: 180 bar, pressure vessel: 330 bar. Foam types: rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multi-mold foaming is possible. Full documentation is available. An on-site inspection is possible. Lrjdpfx Aottbd Njptsn

Tahun pembuatan: 2025, Kondisi: baru, Automatischer Palettenspender ist das Rückgrat Ihrer Automatisierungsprozesse. Mit bis zu 10 Europaletten (1200x800 oder 1200x1200) beladen, entfällt das manuelle Vorbereiten jeder einzelnen Palette – das spart Zeit und reduziert die körperliche Belastung der Mitarbeitenden. Stattdessen gibt das Gerät Paletten auf Knopfdruck oder nach voreingestelltem Algorithmus auf ein motorisiertes Rollenband ab, das sie zur weiteren Verarbeitung weitertransportiert. Der PD-10 kann mit verschiedensten Palettierlösungen kombiniert werden. Fassungsvermögen: bis zu 10 Europaletten Beladung per Gabelstapler Lredpfx Apshbg Uxeten Reduziert körperliche Belastung Steigert Effizienz