Angkat gunting

Skyjack SJ 4620

Kondisi: bekas, Tahun pembuatan: 2012, tinggi angkat: 2.070 mm, jenis bahan bakar: listrik, Drivetrain Drive: wheel drive Fedov Tknyepfx Am Ssgc Weights Unladen weight: 1,922 kg Functional Lifting capacity: 590 kg Working height: 830 cm Cargo compartment dimensions: 235 x 118 x 207 cm CE marking: yes Condition Overall condition: average Technical condition: average Visual condition: average Further information Delivery terms: EXW Country of manufacture: CA Further information Contact Christian Theißen for more information. Manufacturer: Skyjack Type: SJIII4620 Year of manufacture: 2012 Product type: used Specifications: Max. working height: 8.30 m Platform height: 6.30 m Lifting capacity: 590 kg Lifting capacity on extension: 136 kg Platform dimensions LxW: 2.15 x 1.12 m Platform length extended: 3.35 m Overall dimensions LxW: 2.35 x 1.18 m Height in transport position with guardrail: 2.07 m Height in transport position without guardrail: 1.18 m Drivable up to working height: 8.30 m Ground clearance: 0.08 m Drive type: battery Indoor use only: no Own weight: 1,922 kg Special features: white tyres, anchor points for restraint systems (PPE) available. Location: 41468 Neuss Available immediately

Kondisi: baru, Tahun pembuatan: 2025, Genie GS1932 E-Drive scissor lift, among other features, comes standard with AGM batteries, etc.; new, used, and demo units available Fjdporhknvofx Am Sjgc

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 361 h, tinggi angkat: 6.100 mm, de-1 Fedpfx Amezayx Se Sjgc

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), A used, very well-maintained cold circular saw from EISELE, equipped with a 370 mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting capacity: Round 90°/45° right, left/30° right: 130/130/105 mm Square 90°/45° right, left/30° right: 120x120/100x100/90x90 mm Rectangular 90°/45° right, left/30° right: 200x100/140x100/100x100 mm Pneumatic connection: 7 bar Working height: 900 mm Machine dimensions (W x D x H): 865 x 1332 x 2175 mm Weight: 460 kg For further technical data, see PDF document. Technical data and dimensions: Subject to change/errors excepted. Fgedpfskfp D Tjx Am Ssc

Tahun pembuatan: 2021, Kondisi: baru, Fastech horizontal fully automatic bandsaw BMSO 350 GA Cutting capacity (round) mm: 350 Cutting capacity (rectangular) mm: 400 x 350 Cutting capacity (square) mm: 350 x 350 +30° Round cutting range mm: 320 +30° Flat cutting range mm: 400 x 350 +30° Square cutting range mm: 350 +45° Round cutting range mm: 320 +45° Flat cutting range mm: 290 x 300 +45° Square cutting range mm: 290 x 290 Main drive motor power kW: 2.2 Hydraulic pump power kW: 0.37 Coolant pump power kW: 0.12 Fgjdpfjg Ekt Nsx Am Soc Infinitely variable band speed mm: 20–100 Saw blade dimensions mm: 4160x34x1.1 Table height mm: 760 Weight kg: 1050 Length mm: 2450 Depth mm: 920 Height mm: 2020 Roller conveyor 1200 mm Infinitely variable band speed Hydraulic vise Heavy-duty gearbox Hydromechanical saw blade tensioning Saw blade brush Control unit

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, de001 Fsdpfx Ameyz Ad Uj Segc

Tahun pembuatan: 1979, Kondisi: baik (bekas), nomor mesin/kendaraan: 2001, Saw blade diameter: 400 mm Cutting capacity at 90° round: 95 x 240 mm Cutting capacity at miter 45° round: 75 x 180 mm Saw blade speed: 10.5 / 21 rpm Drive motor: 380 V, 2.6/3.2 kW Fgsdofnrw Sspfx Am Sjc Space required: 1500 x 1100 x 2150 mm Weight: 630 kg

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Our SAPI Blast Rooms SAPI blast rooms and systems—backed by 50 years of tradition and proven quality—are designed for industrial and commercial applications, providing a safe environment for all types of blasting operations. Each hall includes a blast chamber, an abrasive recovery system with filter and de-dusting unit, lighting, and comprehensive safety features to ensure operator protection. Abrasive Recovery System Our recovery system collects, separates, and recycles blasting media, reducing both costs and environmental impact. Ventilation and filtration systems keep air inside the hall clean, while powerful lighting offers optimal visibility for operators. Key components of our SAPI blast rooms: ✅ Blast Chamber: The central zone where blasting operations are performed. 🌬️ Ventilation and Filtration Systems: Reduce dust load and ensure optimal visibility. 🔄 SAPI Recovery System: Recycles abrasive media, minimising costs and environmental impact. 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency stop functions, fire protection, and operator gear such as helmets, overalls, and gloves. ⚙️ Control Cabinet: Central control unit for all electrical components. 🗑️ Dust Collection Bin: Collects fine media for easy disposal. 🛠️ Compressor: High-performance compressor for air supply. 💪 Mammut Blasting Unit: Engineered for demanding industrial applications. Reasons to choose our blast rooms: ✅ High Efficiency: Increased productivity and reduced operating costs. 🛡️ Safe, Clean Environment: Minimised environmental impact and maximised work safety. Fgsdpfsun R N Ajx Am Ssc ⚙️ Customisable Solutions: Tailored solutions for optimum performance. 🔧 Premium Components: Durable parts meaning less maintenance required. 🛠️ Support & Service: Expert assistance for rapid trouble-shooting. 🌱 Environmental Responsibility: Lower waste and reduced ecological footprint. The SAPI Flat Conveyor System: Abrasive media are processed via our high-efficiency abrasive cleaner, which separates out contaminants. This system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit, requiring minimal foundation work for installation on existing hall floors. Advantages of our flat conveyor system: ✅ Shallow installation depth, retrofittable in existing blast rooms 🔇 Low noise and friction operation ⚡ Extremely low energy consumption 🏗️ Significantly reduced wear, as only rubber is used 🚧 Very low installation height

Kondisi: baru, Tahun pembuatan: 2026, The CORMAK H - 260 SA automatic column band saw is a highly efficient machine designed for automatic-cycle cutting of bars, tubes, and profiles made of steel, cast iron, and non-ferrous metals. Its robust body and heavy-duty saw frame, combined with a column-based design, provide excellent rigidity and outstanding stability during cutting, even with the most challenging materials. The saw is equipped with a PLC controller and an intuitive touchscreen interface. The saw allows cutting in both manual and automatic modes. Manual mode enables all operations to be performed directly from the machine control panel. In automatic mode, after activating the machine, the entire cutting cycle—including clamping the workpiece in the vise, feeding to a specified length, lowering the arm for cutting, and lifting it to the set height after completion—all occur without operator intervention. Cutting parameters such as cut quantity, lengths, blade speed, and arm descent rate are set via the control panel. The machine stops automatically when the batch is completed, the blade breaks, or in the event of another malfunction detected by the saw’s control system. The machine frame is an iron casting mounted on a rigid, spatial plate-based structure. Inside the enclosure are the hydraulic unit, coolant tank with pump, and swarf conveyor. The blade drive uses an inverter-controlled motor, enabling smooth speed regulation over a wide range. Hydraulic blade tension ensures optimal working conditions. In the event of a blade breakage, the machine halts automatically. The cooling system and cleaning brush prolong blade life and ensure maximum cutting performance. The hydraulic material feed system enables fully automatic operation. The controller, equipped with an LCD display, allows programming of saw operations, signals material end, displays error messages, and informs the operator about the number of pieces cut after the programmed interval. The maximum single feed per stroke is 500 mm with a precision of +/- 0.2 mm per stroke. The innovation behind CORMAK’s semi-automatic and automatic saws, as well as their manufacture in accordance with ISO:90001 and ISO:140001 standards, ensures safety, quality, and product reliability. Motors are supplied under license from ABB, one of the globally recognized leaders, ensuring long, trouble-free operation. Technical specifications: Cutting capacity: Ø260 mm or 260 x 260 mm Blade dimensions: 3150 x 27 x 0.9 mm Cutting speeds: 40/60/80 m/min Main motor: 2.2 kW Hydraulic unit: 0.75 kW Coolant pump: 0.09 kW Feeder stroke: 500 mm Load capacity: 1500 kg Dimensions: 1600 x 1800 x 1550 mm Weight: 1000 kg Fedpfx Aoiz S I Hsm Segc Maximum cutting range (angle): 0º: ø260 | 260 × 260 mm Standard equipment includes: - Automatic cycle operation - Arm position memory function - Integrated hydraulic unit - Vise position memory function - Variable cutting speeds - Powered blade cleaning brush - Cooling system - Bi-metal band saw blade - CE declaration of conformity - Operating and maintenance manual in Polish and English For further information, please visit our website.

Kondisi: baru, Tahun pembuatan: 2026, The CORMAK H - 300SA automatic column-type band saw is a high-performance machine designed for automatic-cycle cutting of bars, pipes, and profiles made from steel, cast iron, and non-ferrous metals. Its robust body and sturdy saw frame, combined with a column construction, deliver exceptional rigidity and outstanding stability during the cutting of even the most difficult-to-machine metals. The saw is equipped with a PLC controller and an easy-to-use touchscreen interface. Manual mode allows all operations to be performed directly from the machine console. In automatic mode, once activated, the entire cutting cycle—including clamping the workpiece in the vise, advancing it to a preset length against the cutting blade, lowering and raising the saw frame to the desired position after finishing the cut—runs without operator intervention. Cutting parameters such as the number of pieces, cut dimensions, blade speed, and descent rate of the saw frame are all set via the control panel. The machine automatically stops when a cut series is completed, the blade breaks, or any other fault is detected by the saw's control system. The band drive, powered by an inverter-controlled motor, ensures smooth, wide-range speed adjustment. In the event of a blade breakage, the machine halts automatically. Precision blade guidance is provided by guides consisting of roller bearings and carbide inserts. The movable blade guide head adjusts according to the dimensions of the material, enhancing blade stability. Maximum cutting parameters and extended blade life are supported by a coolant system and a cleaning brush. Hydraulically forced descent of the frame is adjustable over a wide range via a precision flow valve. The rapid advance system helps reduce the cutting time for each element. A hydraulic material feed system ensures a fully automatic machine cycle. The controller equipped with an LCD screen allows saw programming, end-of-material indication, error messaging, and displays the number of completed cuts after a set period. The maximum material feed per stroke is 500 mm, with an accuracy of +/- 0.2 mm per stroke. Technical Specifications: Cutting range: ∅ 300 mm / □ 300 mm (height) x 300 mm (width) Bundle cutting: max 260 x 90 mm Blade dimensions (L × W × T): 3505 x 27 x 0.9 mm Cutting speeds: 40/60/80 m/min Feed speed: hydraulic, stepless adjustment Main motor: 3.8 kW Hydraulic unit: 0.75 kW Coolant pump: 0.09 kW Fsdpoiz S Nyefx Am Ssgc Feeder stroke: 500 mm Loading capacity: 1500 kg Dimensions (L × W × H): 1750 x 1950 x 1550 mm Weight: 1200 kg