Pers eksentrik - kolom tunggal

SMERAL LEN 63 C

Kondisi: bekas, Technical details: Pressing force: 63 t Fgjdjvt Nvpepfx Acusk Throat depth: 315 mm Ram adjustment: 60 mm Stroke adjustment: 70 mm Ram stroke: 10 - 105 mm Strokes: 71 - 140 strokes/min Strokes per minute (single stroke): 45 / 50 strokes/min Clearance between side frames: 355 mm Installation height: 335 mm Table dimensions (W x D): 800 x 630 mm Die slot in table: 400 x 130 mm Clamping plate (W x D): 616 x 85 mm Ram clamping surface (W x D): 450 x 280 mm Ram bore: Ø 50 x 83 mm Total power requirement: 7.5 kW Approx. machine weight: 5.9 t Control cabinet dimensions (L x W x H): 0.86 x 0.30 x 1.3 m Approx. machine dimensions (L x W x H): Press: 1.42 x 1.8 x 2.6 m High-performance press with roller feeder/strip processing line and straightener Application: suitable for series production Equipped with Servo Roller Feeder MINI: inspected until 01/2021 - Manufacturer: P/A GmbH, Type SRF 220 - For strip width: 220 mm - Feed speed: 150 m/min - Operated via hand-held unit Straightening system: - Manufacturer: Wanzke, Type KS 150 - Max. infeed width: 200 mm - 2 powered infeed rollers - 4 powered straightening rollers (top), vertically adjustable approx. 30 mm - 5 powered straightening rollers (bottom), fixed, not adjustable Decoiler (custom-made): - Mechanical/manual - Max. outer diameter: Ø 1,500 mm - Max. inner diameter: Ø 300 mm - Max. width: 200 mm Roller conveyor: - Roller system with 9 roller rails, each with 53 rollers (Ø 25 x 25 mm)

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight approx. 3 t High-End Kellenberger 1500U Ideal for spindle manufacturers or spindle overhaul specialists - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor electrically interlocked! Internal grinding spindle can only be switched on when in position A quantum leap in safety technology - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of spindle speeds - Swivel angle display – upper table - Swivel angle display – wheel head - Marposs touch sensor for external grinding only - Marposs fluid touch sensor for internal grinding Fjdpfxot Ii Rrs Acuegk - Centre height up to 250 mm possible Machine has already been delivered. An identical machine can be assembled with additional options. At present, the machine does not comply with the fundamental safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The determination of the necessary minimum protective measures must be established through a risk assessment according to BetrSichV.

Kondisi: baik (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 63 t, Press LEN63C Fgodpeu Nkfuefx Acuok

Kondisi: baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 25.500 mm, lebar meja: 800 mm, panjang meja: 630 mm, penyesuaian langkah: 105 mm, lebar total: 14.250 mm, panjang total: 17.900 mm, berat keseluruhan: 5.850 kg, gaya penekanan: 63 t, jenis penyesuaian ketinggian: mekanis, daya: 7,5 kW (10,20 hp), Eccentric Press LEN 63C Year of manufacture: 1989 (SMERAL TRNAVA, Czech Republic) Technical specifications: Fgjdpfx Acetzxdzouek - Pressing force: 63 tons - Number of strokes in automatic mode: 65/130 per min - Number of strokes in manual operation: 45/50 per min - Slider stroke adjustment: 10-105 mm - Slider stroke: 70 mm - Table surface: 800 x 630 mm - Slide surface: 450 x 280 mm - Throat depth: 315 mm - Clearance (table to slide): 335 mm - Clearance between uprights: 355 mm - Number of speeds: 2 - Motor speed: 730/1440 rpm - Motor power: 4/7.5 kW - Overall dimensions (LxWxH): 1425 x 1790 x 2550 mm - Weight: 5,850 kg Machine is in good technical condition. Inspection and testing under power possible.

Kondisi: baik (bekas), nomor mesin/kendaraan: 2852, Tahun pembuatan: 2006, kapasitas angkut: 8.000 kg, tinggi angkat: 5.000 mm, tipe tiang: dupleks, lebar kerangka garpu: 150 mm, panjang garpu: 1.600 mm, panjang total: 4.120 mm, lebar total: 2.220 mm, fitur perlengkapan tambahan: Dual tread, Weight system, Fire extinguisher, Perlengkapan: pencahayaan, TCM FD80 dari Uniktruck Fsdpfx Aork Rd Njcuegk

Kondisi: bekas, Tahun pembuatan: 1986, Technical details: Pressure: 63 t Stroke rate: 65 / 130 strokes/min Throat depth: 315 mm Ram adjustment: 60 mm Ram stroke: 10 - 105 mm Distance table / ram: 335 mm Clearance between uprights: 355 mm Clamping plate: 800 x 610 x 85 mm Ram surface: 450 x 280 mm Compressed air: 9 bar Control voltage: 24V / 50Hz Fedju N Dafspfx Acuegk Total power requirement: 7.5 kW Machine weight approx.: 5.9 t Machine dimensions approx. LxWxH: 1.42 x 1.8 x 2.6 m Press equipped with tilting frame (25°) and combined inching and overload protection (overload shutdown). Available modes of operation: Single stroke via foot pedal (slow speed and inching) and/or manual control (slow speed) Continuous stroke via foot pedal (slow and fast speed) and/or manual control (slow and fast speed)

Kondisi: baru, Tahun pembuatan: 2024, Container rotator, 10-ton load capacity. Dual synchronized drive. Axle spacing continuously adjustable via threaded spindle. Speed continuously variable. Includes foot remote control. Suitable for diameters from 300 mm to 3,500 mm. Roller width and diameter: 120 x 270 mm. Speed: 200 – 1,200 mm/min. Fsdpfxjifk Rbe Acuogk

Tahun pembuatan: 1990, Kondisi: bekas, Pressure: 75 t Outreach: 300 mm Stroke: 8 - 110 mm Table surface: 750 x 600 mm Fgsdpfxod Nl E Uj Acujk Ram adjustment: 75 mm Ram area: 430 x 230 mm Pass-through opening in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, featuring new hydraulics and oil cooler - with gear drive in oil bath - fixed table prepared for mounting tool change consoles - 2 roller rails in the table - mechanical overload in ram (rupture plate) The following work will be carried out on the machine / partial overhaul: - Machine will be completely disassembled, checked, seals replaced, defective parts exchanged, etc. - Machine will be newly painted - new Balluff cam switch mechanism - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - current UVV (accident prevention regulation) inspection with brake time measurement

Kondisi: bekas, TECHNICAL DATA - Maximum workpiece dimensions: 650 x 420 [mm] - Maximum workpiece thickness: 160 [mm] - Maximum weight: 350 [kg] Fedsuhcbcjpfx Acusgk - Travel (X, Y, Z): 320 x 220 x 180 [mm] - Table feed rate: 900 [mm/min] - Wire feed speed: 0 - 10 [m/min] - Wire tension: 80 to 2500 [g] - Wire guide: Ø 0.25 [mm] - Tank capacity: 260 [l] - Dimensions: 3,200 x 2,200 x 2,000 [mm] - Weight: 1,900 [kg] EQUIPMENT - CNC FANUC 16W control - Cooling unit - Lubrication tank with pump - Automatic threading

Kondisi: bekas, Tahun pembuatan: 2010, Maximum turning diameter: 410 mm Turning length: 1,235 mm Control: IT / Turn Plus Heidenhain Swing diameter over bed: 700 mm Main spindle speed range: max. 4,000 rpm Main spindle drive power: 35 / 45 kW Max. torque: 770 Nm Spindle nose: 220 h5 Spindle diameter at front bearing: 160 mm Max. usable bar diameter: 95 / 104 mm C-axis: 0.001° Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range of driven tool stations: max. 4,000 rpm Drive power driven tool stations: 12 kW Max. torque driven tools: 36 Nm Tool holder: VDI 40 DIN 69880 Turret indexing time (30°): 0.4 sec Y-axis: 120 (+/- 60) mm X-axis: 300 mm Z-axis: 1,300 mm Y-axis: +/- 60 mm Tailstock travel: 1,200 mm Tailstock taper: MK 5 Clamping pressure: 1,400 daN Rapid traverse (X / Y / Z): 30 / 22.5 / 30 m/min Total power requirement: 60 kVA Machine weight: approx. 7.7 t Space requirement: approx. 6.0 x 3.5 x 2.5 m CNC Turning and Milling Center GILDEMEISTER - CTX beta 1250 V4 - Tailstock - Y-axis Fedpfx Asvzhiwscujgk - Driven tools - Direct measuring system - Bar machining package - Interface for bar feeder / bar loading magazine