Mesin penggilingan

Soraluce FLP 10000

Kondisi: baru, en-GB Cgjdpfx Amsd Iipmj Ijt

Kondisi: seperti baru (mesin pameran), Hydraulically height-adjustable welding turntable, 3000 kg capacity Cjdpfx Asdvn E Uem Ijgt - Speed range: 0.05 to 0.6 rpm - Table diameter: 1200 mm - Tilt angle: 0 to 120° - Total height adjustment: approx. 700 mm - Height adjustment (with vertical plate to center): 960 mm to approx. 1910 mm - Dimensions with horizontal plate: 1200 mm to 1900 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 620 h, 1 Cjdpfxew Dfhzj Am Iegt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 12.000 h, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 720 mm, tinggi total: 3.376 mm, beban meja: 2.500 kg, berat keseluruhan: 16.300 kg, kecepatan spindel (maks.): 18.000 rpm, daya motor spindle: 33.000 W, berat alat: 8.000 g, panjang produk (maks.): 5.480 mm, jumlah sumbu: 5, This 4-axis Mazak VTC 800/30 SR was manufactured in 2016 and is a robust vertical machining center featuring a table width of 3,500 mm and a length of 820 mm. It offers a maximum spindle speed of 18,000 rpm and rapid traverse rates of 50 m/min in all X, Y, and Z axes. The machine is equipped with a tool changer holding 30 tools and can handle a maximum tool weight of 8 kgf. Take advantage of this opportunity to acquire the Mazak VTC 800/30 SR vertical machining center. Contact us for further information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Min. distance spindle nose to table surface: 140 mm • Max. distance spindle nose to table surface: 860 mm • Working spindle • Tool holder: HSK63 • Capacity for 155 tools with HSK63 holders • Feed rates • Rapid traverse X/Y/Z: 50 m/min • Worktable • T-slot width: 18 mm • Number of T-slots: 7 • T-slot spacing: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool shank: 40° steep taper • With neighboring pockets occupied: 80 mm • With neighboring pockets empty: 130 mm • Total magazine tool weight: 150 kgf • Chip-to-chip time: 4.7 s • Operating requirements • Connection voltage: 380/400/415 V +10% • Connection frequency: 50/60 +1 Hz • Air pressure: 5–9 bar • Air consumption: 260 l/min • Tank capacity: 500 l • Machine condition / usage • Spindle hours: 12,000 Additional equipment Csdpjx Nkp Ujfx Am Iegt • AirFresh FMN V12 extraction system (installed on both sides and connected to a door sensor) • Mount for vertical operation of the rotary table • 2x Renishaw TS27R integrated tool presetters • License options: ShopMill Sinumerik 5-axis milling, 5-axis machining package • Spare parts: • Y-axis motor for tool magazine • Linear axis drive motor • Rotary axis drive motor • Cylinder for swivel unit

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: Pressing force: 160 t Throat depth: 360 mm Ram stroke – max.: 500 mm Distance table to ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4x Ø 62 mm Ram advance speed: 200 mm/s Ram return speed: 125 mm/s Ram surface: 450 x 850 mm Csdpfx Aju Nfvusm Isgt Pin hole in ram: Ø 49 mm Height above floor: 810 mm Total connected load: 17 kW Machine weight approx.: 7,200 kg Machine dimensions (LxWxH) approx.: 2.1 x 1.4 x 3.4 m Manual counter In stock

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4NTV88BXIHR, berat keseluruhan: 848 kg, jenis bahan bakar: diesel, kapasitas tangki: 190 l, warna: merah, daya: 16 kW (21,75 hp), tegangan keluaran: 400 V, frekuensi keluaran: 50 Hz, jenis arus keluaran: tiga fasa, daya nominal: 16 kW (21,75 hp), daya nominal (semu): 20 kVA, daya kontinu: 16 kW (21,75 hp), daya semu kontinu: 20 kVA, panjang total: 2.150 mm, lebar total: 1.040 mm, tinggi total: 1.550 mm, kecepatan rotasi (maks.): 1.500 rpm, produsen motor: Yanmar, jenis pendinginan: air, konsumsi bahan bakar (gabungan): 3 l/100 km, konsumsi bahan bakar (perkotaan): 3 l/100 km, konsumsi bahan bakar (luar kota): 3 l/100 km, bahan bakar: diesel, kapasitas tangki bahan bakar: 190 l, kapasitas baterai: 100 Ah, tegangan baterai: 12 V, tegangan masuk: 380 V, frekuensi input: 50 Hz, arus masuk: 32 A, suhu operasional: 25 °C, suhu lingkungan (min.): -25 °C, suhu lingkungan (maks.): 45 °C, tinggi kabinet kontrol: 1.550 mm, panjang kabinet kontrol: 2.150 mm, lebar kabinet kontrol: 1.040 mm, tingkat kebisingan: 65 dB, jenis perlindungan (kode IP): IP65, kecepatan rotasi (min.): 1.500 rpm, suhu: 25 °C, jenis arus masuk: tiga fasa, masa garansi: 12 bulan, Perlengkapan: dokumentasi / manual, tangki solar portabel, en Cgsdpfxev Rncis Am Iet

Kondisi: baru, Tahun pembuatan: 2025, kapasitas angkut: 5.000 kg, Complete set incl. hand and double foot remote control Digital speed display Hydraulic height adjustment Dimensions: Minimum tilted height: 800 mm Maximum tilted height: 1900 mm Minimum horizontal height: 1050 mm Maximum horizontal height: 2000 mm Cgsdpel Dq U Uofx Am Iet Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed from 0.01 to approx. 0.9 rpm CE certified

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 1.000 mm, produsen pengendali: STYLE CNC Machines, jumlah slot dalam magazin alat: 24, produsen motor: FANUC, Pengiriman setelah konsultasi Ref: 24F048 Tahun pembuatan: 2025 Kondisi: Showroom Spesifikasi: - Sumbu X: 4000 mm - Sumbu Y: 1000 mm - Sumbu Z: 1000 mm - Motor utama 26 kW (S6) - 8000 rpm - BT-40 - Penukar alat otomatis (24 posisi) - Layanan jarak jauh (IXON) + koneksi jaringan - Pompa pendingin lebih kuat incl. semprotan Cgodpfx Amew Ty S Ss Iet - Ditingkatkan ke perangkat lunak STYLE terbaru yang tersedia

Kondisi: baik (bekas), Tahun pembuatan: 2014, jam operasional: 8.035 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MH0017-000100, jarak pergerakan sumbu X: 1.400 mm, jarak lintasan sumbu Y: 1.050 mm, jarak gerak sumbu Z: 1.200 mm, produsen pengendali: fanuc, model controller: 31i, jam operasional spindle: 6.000 h, Horizontal machining center Doosan NHP 8000, new, equipped with Fanuc 31i control cabinet Included equipment and options: - 800x800 mm pallet centering device Csdpfxswu Rgqj Am Iogt - Hand-held coolant gun - High-pressure coolant system, 70 bar, 7.5 kW, with cyclone filtration - Automatic tool changer - Tool load management - Chip conveyor - Renishaw RMP60 workpiece probe - TS27R tool probe

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Winch incl. Maximum lifting capacity: 2 tons at 2.7 meters Maximum lifting capacity: 1 ton at 5.3 meters Operating hours: 270 h Cgsdoq N E U Aopfx Am Iot Electric: yes