ROLLER COATER (MUNDUR)

SORBINI T/20 - MR Reverse

Kondisi: sangat baik (bekas), ROLLER COATING MACHINE (REVERSE) Max. working width: 1300 mm Total machine length approx.: 1600 mm Ndjdpfx Asidqwpofvja Integrated control cabinet with operator panel Powered conveyor belt for workpiece feed (with servo controller, estimated power 0.75 kW) Feed speed: 6 m/min to 24 m/min Total connected load approx.: 4.1 kW Equipped with 2 work stations: * 1st unit (with 2 rollers) Dosing roller made of chrome steel, diameter 174 mm + application roller with rubber coating, diameter 248 mm, with 2 speed controllers (power 0.37 kW + 0.75 kW), with rubber-coated counter roller underneath * 2nd unit (with 2 rollers) Dosing roller made of chrome steel, diameter 174 mm + application roller with rubber coating, diameter 248 mm, with 2 speed controllers (power 0.37 kW + 0.75 kW), with rubber-coated counter roller underneath

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), Panel saw for plexiglass and wood panels with extraction unit Very good condition! Maximum cutting height: 2200 mm Njdpfoinunqjx Afveda Maximum cutting length: 4200 mm Maximum cutting thickness: 60 mm Length: 5600 mm Depth: 1400 mm Height: 2900 mm Weight: 850 kg

Kondisi: sangat baik (bekas), DOUBLE-SIDED FEEDING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (with carriage gliding on it) Nsdpfxofi Tg Hs Afvjda No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for feeding stacks of panels to the feeding station External motorized roller conveyor (receiving panels from the feeding station) Separate electrical control panel Perimeter safety fencing with safety mats Operating capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Minimum panel dimensions mm 250 x 320 (approx.) Maximum panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Kondisi: bekas, nomor mesin/kendaraan: 008377, Arbeitsbereich Achse X: 3390 mm Arbeitsbereich Achse Y: 1570 mm Arbeitsebene: Mit Vakuum-Konsolenauflagen Leistung Haupt-Spindel: 13 KW Anz. kontrollierte Achsen: 4 Achsen Ndedpfx Ajx Swb Aefvoa Anzahl Bohrspindeln: 32 Anzahl Werkzeugplätze: 10

Kondisi: baik (bekas), Tahun pembuatan: 2003, Automatic hydraulic press for gluing Kallesoe Type LV 7821 – the press is used for bonding wooden components, e.g., tabletops, with maximum dimensions of 7800 mm x 2100 mm. The glue curing process is accelerated by hot water supplied to the press platen, circulating continuously (it can be supplied from central heating or heated via integrated heating elements on the press). Press heating power: 72 kW Maximum press capacity: up to 2000 m2 / 7.5 hours Njdpforqzgkox Afveda Kallesoe Type KL40 glue spreader with loader – designed for the automatic application of adhesive to each lamella and direct feed to the LV7821 press.

Kondisi: bekas, Pusat pemesinan CNC BIESSE Rover C 6.50 CONF.2, tahun 2007 Area kerja: sekitar 140 × 460 cm Nedpow Rpd Ssfx Afvjda Dimensi mesin: 300 × 650 cm Berat: sekitar 6.100 kg Dua kepala kerja Majalah alat: 22 posisi Spindel bor vertikal: 28 pcs Spindel bor horizontal: 12 pcs Harga dapat dinegosiasikan, tersedia segera. Harga belum termasuk PPN.

Kondisi: bekas, nomor mesin/kendaraan: 007984, 482bd3a4 Njdpfx Afswqdbmsvoda

Kondisi: bekas, Tahun pembuatan: 2016, Angle plate saw with automatic pre-tensioning and double pusher system for optimized cutting Osi Plus numerical control Os Labeling labeling machine with onboard graphic labeling of the parts with illustrations Software for label print management Optiplanning cutting optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade protrusion: 95 mm Motorized rollers for side loading onto lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Ndjdpfx Aeuc Idxjfvsa Automatic recognition of throwaway panel (sacrificial panel) based on thickness specified in the machine data Low stack stop Automatic side loading. Includes: safety grids, double photo cell, push-button control panel, electrical pre-installation for the two motorized pre-roller conveyors, and reinforcement with 4 rollers instead of fork passages in the pre-roller conveyor Intermediate roller conveyor Side feed pre-roller conveyor, dimensions 3800 x 2200 mm, with motorized rollers (height from floor: 325 mm) Gravity conveyor for feeding longitudinal offcuts to corner systems, 4500 mm (total length: 7295 mm) 3000 mm extension of the gravity conveyor for also conveying cross-cut offcuts Long chute for manual transfer of cross-cut section to central gravity conveyor Air cushion outfeed table, 2050 x 850 mm, fitted with front wheels Air generator for up to 6 air cushion levels MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows the minimum panel length required for cross-cutting to be reduced from 1830 mm to 1220 mm. Automatic device for detecting saw spindle deflection in angular installations (longitudinal and transverse), consisting of a sensor that detects deflection directly on the saw shaft and a device that detects the blade revolutions directly at the chuck. Remote cycle start panel Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main saw blade, max. diameter mm, 15 KW Scoring blade, max. diameter mm, 2.2 KW Saw carriage speed 1-140 m/min – brushless motors Longitudinal pusher carriage speed 90 m/min Cross pusher carriage speed 135 m/min Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed grippers + 2 on the cross carriage, multi-pusher system) Cutting system for thin panels

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, jam operasional: 180 h, Fungsionalitas: berfungsi sepenuhnya, panjang total: 8.000 mm, lebar total: 1.200 mm, tinggi total: 1.300 mm, jenis arus masuk: AC (pendingin udara), tegangan masuk: 400 V, daya: 10 kW (13,60 hp), SOEST Universal Surface Finishing Line for oiling, staining, lye treatment, patination, etc. Primarily for parquet surfaces up to 40 cm workpiece width. 1) RCR-400-L Reverse Roller Coater, for applying and removing surface products such as oils, stains, varnishes, etc. 2) VP-400-1B-2P-2B Brushing Machine with one brush, two pad discs, and another two brushes, for distributing and working in surface media or patinating into pores, and/or for removing, spreading, and distributing depending on the desired surface effects. 3) Accessories: two replacement application rollers, unused material pump, four spare brushes, various pad discs, and a pneumatic brush cleaning machine. Nedpsyaiafofx Afvsda This complete surface finishing line is engineered for professional industrial use and is configured with the highest level of equipment. A large range of accessories is included with the system, such as additional rollers and cleaning machines (see pictures!). Very robust construction, all motors are frequency-controlled (Siemens). Speeds are infinitely adjustable in forward and reverse operation. Maximum workpiece width approx. 410 mm. The system is in very good condition, used only about 180 operating hours and is therefore considered as new. This finishing machine served only as an auxiliary line in a parquet production facility and was used exclusively for specific surface techniques, explaining the low operating hours—meaning it was used only occasionally between 2019 and 2022. In 2023, our company downsized, and since then the equipment has been stored and is immediately available, thus it remains in almost mint condition! This equipment will no longer be used in our operations, which is why it is up for sale. The original purchase price in 2019 was approx. €87,000, and the current sale price is negotiable! Inspection of the surface finishing system is possible by prior arrangement. If required, we can also offer 10 drying rack trolleys for sale with this system. (YouTube video is for demonstration purposes only and shows a similar system configuration!)

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, panjang total: 36.000 mm, Flatironing dryer, working width 4,600 mm, length 22,000 mm (of which 10,000 mm with pressure rollers), separate pressing/cooling section, heating medium: hot water, semi-automatic feeding device, type BFT46 with lifting platform, max. veneer length: 4,600 mm, roller width: 600 mm, total length: 36,000 mm, 11 fans, PLC control renewed in 2017. Ndsdpfx Afsv Hygfevja A second flatironing dryer of a similar design is also available.