SPINNER TC800

SPINNER TC800

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jam operasional: 26.180 h, kecepatan spindel (maks.): 2.500 rpm, jarak pergerakan sumbu X: 360 mm, jarak gerak sumbu Z: 980 mm, daya motor spindle: 33.000 W, tinggi total: 2.090 mm, lebar total: 1.980 mm, berat keseluruhan: 7.500 kg, Diameter batang (maks.): 110 mm, produsen pengendali: SIEMENS, panjang produk (maks.): 3.250 mm, diameter benda kerja (maks.): 500 mm, jumlah slot dalam magazin alat: 12, jumlah sumbu: 3, Mesin bubut 3 sumbu SPINNER TC 800 110 MC ini diproduksi pada tahun 2009. Mesin ini dilengkapi dengan chuck untuk menjepit benda kerja dan sistem penyedot debu. Perlengkapan opsional termasuk pengumpan batang, wadah penampung benda kerja, turret dengan alat yang digerakkan, konveyor serpihan, dan stok ekor. Jika Anda mencari kapasitas pembubutan berkualitas tinggi, Anda sebaiknya mempertimbangkan mesin bubut horizontal SPINNER TC 800 110 MC yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Kecepatan alat yang digerakkan: 4.000 RPM • Daya penggerak alat yang digerakkan (100 %/40 %): 5 / 9,6 kW • Kecepatan cepat X/Z: 15 / 24 m/menit • Diameter bubut maksimum: sekitar 500 mm • Diameter ayun maksimum: sekitar 800 mm • Jarak antara senter: 800 mm • Taper spindel: A11 • Daya spindel utama (100 %/40 %): 22 / 33 kW • Torsi spindel utama (tingkat 1, 100 %/40 %): 175 / 263 Nm • Torsi spindel utama (tingkat 2, 100 %/40 %): 700 / 1050 Nm • Kapasitas tangki cairan pendingin: sekitar 235 l • Kapasitas tangki hidrolik: sekitar 11 l • Tangki pelumasan sentral: sekitar 2–3 l • Berat mesin: sekitar 7.000–7.500 kg • Tegangan suplai: 3/PE ~ 400 V • Frekuensi: 50 / 60 Hz • Arus operasi (IB): 63 A • Arus nominal (IN): 80 A • Chuck yang digunakan untuk penjepitan • Tegangan suplai: 3/PE ~ 400 V • Frekuensi: 50 / 60 Hz • Arus operasi (IB): 63 A • Arus nominal (IN): 80 A Kjdpfjzlqycox Al Njlw • Chuck untuk penjepitan • Penyedot debu Peralatan tambahan: • Pengumpan batang • Perangkat penampung benda kerja • Turret dengan alat yang digerakkan • Konveyor serpihan • Stok ekor Spesifikasi Teknis Spindel Balik Tidak Alat yang Digerakkan Ya Ukuran Taper VDI 50

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 100 h, kecepatan spindel (maks.): 5.000 rpm, tinggi total: 1.800 mm, berat keseluruhan: 2.200 kg, produsen pengendali: FANUC, model controller: 31t- Model B, jumlah sumbu: 3, This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014 and features a robust FANUC 31i B control system and a double spindle arrangement with C and Y axes for complex machining operations. Equipped with a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length, this machine is ideal for precision turning and milling applications, providing a comprehensive solution for modern metalworking. Contact us for more information about this machine. Additional Equipment • Automatic bar loader with adjustable part length and bar diameter • Remnant extraction system • Polyurethane plastic guide channel • Longitudinal movement displacement system Advantages of the Machine Qualitative Machine Advantages • No spindle reduction required Kljdpfx Aox D H Sfsl Nsw Technical Machine Advantages • Cooling: Thermo-compensation unit • Axes: C axis and Y axis • System: Linear guideway system, digital drive system • PART CATCHER: Pneumatically operated finished part catcher for gentle unloading of finished parts. Finished parts are conveyed into a collection box (standard) or onto a conveyor belt (optional). Max. finished part length: 175 mm, max. finished part diameter: 65 mm. • Tool system: 12-position tool turret, VDI30 radial • Driven tools: up to 12 driven tools • Sub spindle speed range: 0-7000 rpm • Bar length capacity: 1200 - 3200 mm • Bar passage diameter: 20 - 65 mm • Feed rate: 0 - 627 mm/sec • Turning length: 650 mm Additional Information Control unit: Integrated PLC Features: Fully automatic work cycle, monitoring and fault diagnosis (display output) Tools Max power: 6.7 kW Max torque: 25 Nm Speed range: 0-5000 rpm C-axis: Available Media Power supply: 200/220/400 V AC Compressed air requirement: Min. 7 bar Air consumption: 45 L/min Installation position (mounting) The installation kit includes vibration-dampening, height-adjustable leveling pads and mounting brackets. Machine history Note: Machine as new with only 100 operating hours Dimensions Machine depth 4500 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 360 mm, jarak lintasan sumbu Y: 120 mm, jarak gerak sumbu Z: 1.580 mm, daya motor spindle: 29.500 W, tinggi total: 2.115 mm, lebar total: 1.980 mm, berat keseluruhan: 8.500 kg, panjang produk (maks.): 5.750 mm, jumlah sumbu: 3, This 3-axis SPINNER TC800L 110 was manufactured in 2023. The machine is fully operational and equipped with a steady rest, tailstock, chip conveyor, and oil mist extraction system. It operates on a 3-phase power supply at 400 V. If you are looking for a high-quality lathe, you should consider the SPINNER TC800L 110 horizontal lathe we are offering for sale. Please contact us for further details. • Condition/Status • Machine powered on and still in operation • Fully functional; steady rest requires sensor replacement • Configuration and capacities • Turret without AgW (adjustable power supply) • Turret type: axial/radial • Number of tool stations: 12x VDI50 (Option: 16x VDI40 or 12x BMT65) • Tool holder type: VDI50 (Option: VDI40/BMT65) • Number of driven tools: 12 (optional) • Driven tool speed: 4,000 rpm • Driven tool power (S1/S3): 2.2 / 5.5 kW • Driven tool torque (S1/S3): 17.5 / 43 Nm (axial), 14 / 35 Nm (radial) • Max. turning diameter: 500 mm • Max. swing diameter: 800 mm • Turning length: 800 mm / 1,580 mm (L-version) • Distance between centers: 800 mm / 1,580 mm • Max. workpiece weight: 800 kg • Axes • Rapid traverse X/Z: 15 / 24 m/min • Spindles: • Number of spindles: 2 • Main spindle • Spindle nose: A11 • Bar capacity: 110 mm • Torque (100% / 40%): 175 / 235 Nm • Gearbox torque, stage 2: 700 / 939 Nm • Counter spindle (option) • Spindle nose: A6 • Bar capacity: 52 mm • Chuck size: 210 mm • Power (S1/S6): 15 / 19 kW • Torque (S1/S6): 95 / 121 Nm • Tailstock (if equipped) • Quill diameter: 110 mm • Taper: MT4 • Stroke: 100 mm • Thrust: 850 daN • Fluids and tanks • Coolant tank capacity: approx. 235 l (up to 270 l for L-version) • Hydraulic tank: approx. 31 l • Central lubrication tank: approx. 2-3 l • Electrical data • Electrical connection: 3-phase 400 V + N + PE • Frequency: 50/60 Hz (also listed as 50 Hz) • Rated current: 44 A • Power circuit fuse: 50 A • Main circuit fuse: 63 A • Connected load: approx. 40 kVA (up to 50 kVA with 2 spindles) • Protection class: BA 3 (Sec. 3.4.5) • System grounding: TN system with grounded neutral point • Recommended protection: without RCD (recommended) Additional equipment Kodpfxsyyzucs Al Nslw • Steady rest (Note: sensor needs replacement) • Tailstock • Chip conveyor • Oil mist extraction system • Possibly chuck and tool holders (to be confirmed) Technical Specification Counter Spindle: No Driven Tools: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jarak pergerakan sumbu X: 360 mm, jarak gerak sumbu Z: 900 mm, produsen pengendali: SIEMENS, model controller: 840D, jumlah sumbu: 4, Mesin SPINNER TC800 110 SMCY 4-sumbu ini diproduksi pada tahun 2016. Mesin ini memiliki sumbu X dengan lintasan maksimal 360 mm dan sumbu Z dengan lintasan 900 mm, dilengkapi dengan spindle tandingan dan alat potong berputar. Jika Anda mencari mesin bubut berkualitas tinggi, pertimbangkan SPINNER TC800 110 SMCY mesin bubut horizontal yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Pengatur alat Kodpfx Aloy En Awe Nslw Spesifikasi Teknis Counter Spindle: Ya Driven Tools: Ya

Kondisi: bekas, Tahun pembuatan: 2002, de-maschine-zusatz-drehkran Kedpfx Aexykvmjl Nolw

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: AV0572, SPINNER TC800 with Travel Paths X=360mm Z=900mm 45-Degree Slant Bed Design with hardened and ground slideways WITH driven tools WITH Y-axis TOOL TURRET - WITH driven tool stations All tool positions can be powered using turret disks with a pitch circle or on the inner pitch circle Configured as a servo turret Tool Holder System at Turret: BMT65 Number of Tool Stations in Turret: 12 SPINDLE 1 Version up to 3,400 rpm - 85mm As integrated motor spindle, with water cooling using modern synchronous technology with hydraulic hollow clamping cylinder, bar capacity 85mm Speed range 0-3,400 rpm, Pmax 80 kW / 930 Nm Spindle nose DIN55026/A8 FOOT SWITCH Kedpfx Asrbhd Nel Nolw TAILSTOCK can be dragged in the program by coupling with Z-axis, hydraulically clamped to the bed. With additional integrated hydraulic quill and support for fixed center. FOOT SWITCH DIRECT MEASURING SYSTEM in X-axis Control SIEMENS 840DE including: - SPINNER SPIOS 24" Touch operating panel for I4.0 applications - Height-adjustable, rotatable, and tiltable control panel for best ergonomics - incl. engraving cycles - 24" LCD flat color display with multi-touch functionality - User memory 2 GByte - 15 zero point offsets - 1 free USB interface - Standard Ethernet interface SPINNER MULTI-CONTROL-WHEEL on the control panel for the following functions, integrated in one single control element: - Handwheel mode in jog operation - Feed override in automatic operation - Start button and feed override for single-block setup mode, auto-reset to 0% at end of block -> all key setup functions integrated into one control element - SHOPTURN - 4-axis machining with rotary axis - 3D SIMULATION of finished part - REMAINING MATERIAL DETECTION - DXF Reader CHIP CONVEYOR as hinged belt conveyor, discharge to the right, incl. integrated coolant tank and conveyor pump. HIGH-PRESSURE PUMP 15 bar CARTRIDGE FINE FILTER MEASURING PROBE for tool measurement in work area incl. quick-change coupling STANDARD DOCUMENTATION IN GERMAN consisting of machine manual and CNC manuals supplied in digital form inside the control system. STANDARD PAINT two-tone in light grey RAL7035 and blue-grey RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Line frequency 50Hz (+/-2%) TN system (5-wire) Notes: The price includes warranty services only within Germany. For new and demonstration machines, the images shown are not necessarily of the individual machine but of comparable models. Shown accessories such as clamping devices or tool holders are only included if listed in the technical description. Please request a detailed quotation ex works. Visit our factory near Munich or one of our showrooms. We may have additional comparable machines on offer. Prior sale expressly reserved.

Kondisi: baru, Tahun pembuatan: 2026, CNC drilling and milling machine Kudu with CNC control and tool changer (3-axis) Drilling and milling machine with movable processing unit – the table remains stationary, and the drilling head moves. The drilling unit can operate both manually and fully automatically. After each drilling cycle, the processing unit automatically moves to the next drilling position along the X and Y axes. Operation is designed for ease of use. Data transfer to the machine control is possible via DXF/DWG file formats using a programming station. Alternatively, programming can also be performed directly at the machine control unit. The system is highly robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base frame • Drill head speed: up to 2,500 rpm (standard version), supplied with the appropriate speed for your application • Tool holder: SK 40 • X, Y and Z axis driven by servomotors • Rapid traverse in X axis: 20 m/min • Rapid traverse in Y axis: 5 m/min Kodpfx Aefu Ivzel Nolw • Distance from table top to bottom edge of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St 50 (tool-dependent) • Tapping: M4 – M30 (with compensation chuck) • Y-axis travel: 300 mm • Positioning tolerance X axis: ±0.1 mm • Positioning tolerance Y axis: 0.06 mm • Positioning tolerance Z axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Compressed air connection: 8 bar • Front safety via light barrier • Rear access protection via safety fence • Control: 21.5" touch screen panel, reinforced front glass • Simple programming directly at the machine • Milling of elongated holes and circles • Lubrication via minimal quantity spray system • Without material clamping devices • Remote maintenance via Teamviewer possible (LAN interface) • Tool magazine for drilling tools, with dimensions, rotational speed • Simulation of work processes • Digital handwheel Your benefits: • Workpiece surfaces are protected • Clear, graphical user interface • Machining directly at the workpiece end is no problem • 50% space savings compared to moving-table systems • Chips are collected in a chip tray • Easiest programming & operation • Minimal quantity spray system (standard) • Programming errors eliminated by CAD/CAM You are welcome to view the desired system at any time in our production/showroom. Please feel free to contact us about this. We look forward to your inquiry! Plantec Maschinen GmbH

Kondisi: bekas, Tahun pembuatan: 2007, Detail teknis: Diameter putar: 220 mm Panjang putar: 310 mm Kebutuhan daya total: 17 kW Berat mesin sekitar: 3,3 t Kebutuhan ruang sekitar: 2,25 x 1,63 x 1,94 m Diameter putar di atas alas: 430 mm Diameter lubang tengah: 45 mm Jarak antara senter: 687 mm Klodpox Aq Hwsfx Al Now Lintasan geser radial (Sumbu X): 160 mm Lintasan geser aksial (Sumbu Z): 310 mm Kecepatan putar spindle: 0–6.300 rpm

Kondisi: baik (bekas), 001 Klsdpfx Alsxtu Erj Njw

Kondisi: bekas, Tahun pembuatan: 2000, Year of manufacture: 2000 Control: Mazatrol 640 Includes documentation Chip conveyor TECHNICAL DATA – MAZAK INTEGREX 200SY Performance / Capacity Max. swing diameter: Ø 540 mm Chuck size: 8" Max. machining diameter: Ø 540 mm Max. machining length: 1018 mm Max. outer diameter for bar material: Ø 51 mm Main spindle Ksdpfxsyh E Ire Al Nslw Spindle nose: JIS A2-6" Spindle bore diameter: Ø 61 mm Spindle speed: 35 – 5,000 rpm (standard) / 35 – 4,500 rpm (option: 5,000)* Motor power (30 min. rating): 22 kW (18.5 kW*) Max. torque: 350 Nm (35.7 kgf·m) Sub spindle (counter spindle) Spindle nose: JIS A2-6" Spindle bore diameter: Ø 44 mm Spindle speed: 35 – 5,000 rpm Motor power (10 min. rating): 7.5 kW Max. torque: 57 Nm (5.8 kgf·m) Turret / Tool Data Turret type: With ATC, spindle turret Tool size external turning tool: □ 25 mm Tool size internal turning tool: Ø 40 mm Milling tool: Max. Ø 120 × 250 mm length Index time (90 degrees): 0.5 s Milling spindle speed: 15 – 6,000 rpm (option: 10,000) Milling spindle motor power: 7.5 kW Max. milling spindle torque: 62.29 Nm (6.35 kgf·m) Feed axes X-axis: travel 530 mm / rapid traverse 30,000 mm/min Z-axis: travel 1,065 mm / rapid traverse 33,000 mm/min Y-axis: travel 140 mm / rapid traverse 15,000 mm/min Z2-axis: travel 1,005 mm / rapid traverse 20,000 mm/min Media / Electrical Coolant tank capacity: 250 L Power consumption (continuous): 32.7 kVA Machine dimensions / weight Total length: 3,485 mm Total width: 2,105 mm Total height: 2,416 mm Weight: 73,575 N (7,500 kgf)