Gergaji bundar

Störi Mantel FLS ECO

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial no. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Hsdpfjt Hw Iijx Aanonl

Kondisi: bekas, Tahun pembuatan: 2022, Used machine Year of manufacture: 2022 Features and technical data: - Heavy-duty professional panel saw - With scoring unit; adjustable from the outside, equipped with separate drive motor - Sliding table made from anodised aluminium with proven, permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer's warranty from initial commissioning) - Rip fence with round bar guide; foldable for large panels, quick-clamping mechanism and integrated fine adjustment - Table extension - Table width extension - Integrated on/off switch on sliding table - Motorised height and tilt adjustment of the saw unit, digital display for tilt angle Hnedpfx Ajx Hbruoanol - Programmed control of saw blade height, tilt, and rip fence position - Pivoting control panel at eye level - Quality made in Italy - Cutting length: 3200 mm - Cutting height at 90°/45° with scorer max.: 136.5/97 mm - Cross-cut width left of saw blade max.: 3260 mm - Rip capacity with rip fence: 1270 mm - Saw blade tilt: 90 - 45° - Saw blade diameter with scorer max.: 400 mm - Scoring blade diameter: 120 mm - Main saw blade speed: 3500/5000 rpm - Scoring blade speed: 9200 rpm - Sliding table dimensions: 360 x 142 x 3200 mm - Extraction ports: 120 + 80 mm - Motor power: 7.0 kW, 400 V - Scorer motor power: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Availability: short notice Location: Röllbach

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), A Gross Apparatebau GmbH shredder, previously used in the timber industry, is available. Feed opening (X/Y): 600mm/800mm, Hopper volume: 0.6m³, Rotor diameter: 252mm, Rotor length: 600mm, Rotor speed: 90rpm, Drive power: 18.5kW, Number of knives: 14, Screen perforation: 10mm-40mm, Extraction port diameter: 160mm, Machine dimensions (X/Y/Z): approx. 1800mm/1200mm/1650mm, Weight: approx. 1300kg, Operating hours: 4578h. Documentation is available. An on-site inspection is possible. Hodpfx Asu Nlkxsanonl

Kondisi: baik (bekas), Tahun pembuatan: 2011, Internal flange dimensions: 2340 x 1340 mm Hnsdpfxstwba Ss Aansl Maximum panel dimensions (20 mm thickness): 2340 x 1240 mm Working chamber height: 60 mm Total thrust: 300 t Maximum working specific pressure: 5 kg/cm² Pressing cylinders: No. 6, diameter 140 mm, stroke 250 mm Lower movable platen (closing movement from bottom to top) Opening between press platens: 230 mm Loading side: 1400 mm PVC roll unwinder Double loading table

Kondisi: siap digunakan (bekas), Linia do odzysku pryzm z następującymi maszynami: Jedna dwutarczowa obrzynarka do desek Jedna jednoostrzowa pozioma przecinarka taśmowa System przenośników pomiędzy maszynami w komplecie. Hedsgwqk Sopfx Aanonl

Kondisi: seperti baru (mesin pameran), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE. The line consists of the following machines: VZ0200A) Infeed station with double loading unit “BARGSTEDT” Model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge-banding machine “HOMAG” Model KFL 525/8/A3/15 Hnedodt Rgvjpfx Aanel VZ0200C) Turnover station (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge-banding machine “HOMAG” Model KFL 526/10/A3/30 VZ0200E) Turnover station (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDL 510/25/12 VZ0200F) Sword brush “WANDRES” VZ0200G) Stacking station with double buffer unit “BARGSTEDT” Model TSP 410/D/25/12

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), A multi-blade saw from Construzioni Macchine Legno s.r.l. is available. Saw blade diameter min./max.: 250 mm / 360 mm, bore diameter min./max.: 70 mm / 95 mm, cutting width: 320 mm, variable/fixed cutting height: 90 mm / 120 mm, weight: approx. 3,000 kg. Inspection on site is possible. Hnodewv Umwspfx Aanol

Kondisi: bekas, Tahun pembuatan: 1999, Carriage length: 3800 mm Hjdpfx Aasvxi Ddensnl Cutting width at rip fence: 1500 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 140 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Rip fence display: digital Crosscut gauge display: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 7.5 kW Motor brake: yes, automatic Extraction port: 80 mm and 120 mm Machine length: 3900 mm Machine width: 2200 mm Weight: 1000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 8.000 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 750 mm, diameter pembubutan: 330 mm, lubang spindel: 41 mm, kecepatan spindel (maks.): 4.500 rpm, kecepatan spindel (min.): 1 rpm, daya motor spindle: 11.000 W, diameter quill: 50 mm, gores kuas bulu: 110 mm, diameter pembubutan di atas alas geser: 435 mm, berat keseluruhan: 1.400 kg, tinggi pusat: 165 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, For sale: Cycle-controlled WEILER E30X750 CNC lathe featuring Siemens 810 D control unit. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Control: Siemens 810 D Condition: Good, fully operational Location: Austria (Graz) Inspection: On-site or via video call by arrangement Hsdevphv Tjpfx Aanenl Pictures/Video: Additional images and videos of the machine in operation can be provided upon request. Power-on hours (machine powered): 26,492 h. The actual operating hours are significantly lower. Based on experience, spindle running time (actual turning) is typically only about 30% to 50% of this (approx. 8,000 to 13,000 hours). Technical Specifications: Working Area: Centre height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 160 mm Centre distance: 750 mm Spindle: Spindle head DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle front bearing diameter: 70 mm Max. spindle torque: 180 Nm Main Drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speeds: infinitely variable Feed / Rapid Traverse Feed Drive: Three-phase AC feed drives Feed range (infinitely variable): Longitudinal: 0.001–50 mm/rev (additionally specified: 0–20 mm/rev) Cross: 0.001–50 mm/rev Feed force: Longitudinal: 6,000 N Cross: 3,000 N Max. rapid traverse speed longitudinal/cross: 8 / 4 m/min (additionally specified: 10 / 7.5 / 5 / 3.5 m/min) Thread Cutting Range: Metric threads: 0.1–2,000 mm Imperial threads: 112–1/64 TPI Tailstock / Quill: Quill diameter: 50 mm Quill travel: 110 mm Internal taper DIN 228: MK 3 Dimensions / Weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Interested? Please contact us for more information or to arrange a viewing appointment.

Kondisi: sangat baik (bekas), Four-sided planer SCM Compact XL Hedpfslat Hdex Aanenl - Planing width: 23 cm - Planing height: 13 cm - Electric adjustment of top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle 4 kW, right and left each with 7.5 kW motor, top 5.5 kW, universal spindle 5.5 kW Machine in very good condition