Mesin bubut tipe Swiss CNC

Star SB-20R type G

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, DESCRIPTION Hermle C 800 V CNC Vertical Machining Center, built in 08/2000 in Germany. This milling center operates on three axes, with maximum X / Y / Z travels of 800, 600, and 500 mm, respectively. The machine is equipped with a Sinumerik 840D CNC control, connected via LAN cable to an external computer. Additionally, the machine is fitted with a chip conveyor, hydraulic clamping, a magazine for 87 tools, a swivel finder, and a control cabinet air conditioning unit. The spindle reaches a maximum speed of 15,000 rpm. Spindle hours approx. 4,500 hrs. The total weight of the machining center is approx. 7 tons. Technical Data of Hermle C 800 V CNC Machining Center: – Travel X / Y / Z axes: 800 / 600 / 500 mm – Rapid traverse: 35 m/min – Maximum spindle speed: 15,000 rpm – Oil mist extraction Itedoiva Dkjpfx Aahsr – Spindle power: 19 kW – Operating voltage: 400V; 3PH; 50Hz – Control voltage: 220V AC; 24V DC – Machine dimensions (L x W x H): 2.3 x 3 x 2.65 m – Total weight: 7,000 kg Equipment of the Hermle C800V CNC Machining Center: – CNC control: Sinumerik 840D – Tool magazine capacity: 87 slots – Toolholder type: SK40 – Coolant pump through the tool: 40 bar – Control cabinet air conditioning unit – Swivel finder – Chip conveyor Separately available as shown in the photos! – Tool presetting device – Various SK40 tool holders – Heidenhain TS32 probe, as new

Tahun pembuatan: 2007, Kondisi: bekas, Wheel diameter – max. 400 mm Wheel width – mm Module – max. – Workpiece diameter 36-300/400 mm Center distance 135-290 mm Spindle speeds – infinitely variable 3000 rpm Centre distance 100-550 mm Control system Machine weight approx. 4,000 kg Space requirements approx. 2000 x 3055 x 2788 mm Itsdpfegr Harsx Aahjr CNC control Siemens 840 D Test procedures: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli-test under double flank contact Features: - Operation with up to 6 test slides - Maximum test accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (Type: Vogel) - Oil mist extraction (Type: Elbaron)

Kondisi: baik (bekas), STUDER Favorit S35 Cylindrical Grinding Machine Isdpferakibex Aahjtr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 500 mm, DMG CTX Beta 1250 TC 2009 - Siemens Sinumerik 840D SL Ergo Line control with ShopTurn - Machine operating hours: 22,470 - Spindle operating hours: 4,550 - Capto C6 interface - 5-axis simultaneous machining - Gear hobbing - Max milling spindle speed: 12,000 RPM - Max turning spindle speed: 5,000 RPM - Max workpiece diameter: 500 mm - Max turning length: 1,250 mm - Lathe spindle through-hole diameter: 104 mm - Forkardt lathe chuck Type 3QLC 315-88 - Tool magazine with 24 positions - Tailstock - Marposs 3D workpiece probe Type E86 - B-axis +/- 110 degrees - Through-spindle coolant system 80 bar - Automatic doors - Chip conveyor - Small parts catcher with conveyor belt - Oil mist extraction system - Total machine weight: 10 t - Complete service history - Loading included in the price Itedpfx Aajv N Hc Sjhsr The machine is ready for operation and fully functional. Testing is possible. For more information, please contact me by phone or email.

Kondisi: bekas, Deckel Maho DMU 70 eVolution Iedpsw Rtd Ajfx Aahotr

Kondisi: bekas, Tahun pembuatan: 2015, TAKISAWA TS4000YS vuodelta 2015 CNC-ohjaus FANUC 32i-MODEL B Isdpfx Aewq Sf Tjahetr

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya,

Kondisi: bekas, Technical Details: Table diameter: 4,500 mm Faceplate diameter: 4,500 mm Operating hours: 0 h Swing diameter: 5,000 mm Turning diameter: 5,000 mm Workpiece height (max.): 2,500 mm Control system: Sinumerik 840D SL X-axis stroke/ram slide: 300 mm X-axis stroke/ram travel: 2,850 mm X-axis working travel without tool: 2,850 mm X-axis working travel with tool changer: 5,000 mm W-axis (crossrail elevation travel): 1,800 mm Tool station/positions: 12 Tool holder interface: HSK 100 (spindle) Workpiece weight capacity: 100 t Table speed: 1 - 50 rpm T-slots: 8 units (36 H12) Ram milling speed: 4,000 rpm Rapid traverse in X and Z axes: 8,000 mm/min Torque for milling: 100,000 Nm Torque for turning: 200,000 Nm Total power requirement: 80 (2x40) kW Approximate machine weight: 140 t Approximate machine dimensions (LxWxH): 11.5 x 6.6 x 8.4 m Itjdpfsu Ix H Dex Aahjr CNC vertical turning lathe – NEW (The machine pictured is a demonstration model) Application of manufacturing processes: Turning processes, such as external longitudinal turning, internal and external face turning, and profile machining. Grooving operations both internal and external. Drilling, including short-hole and deep-hole drilling. Milling operations, such as face, corner, profile, and T-slot milling. Thread cutting. Also suitable for roughing and end machining. The machine bed, engineered as a welded construction, absorbs extreme cutting forces. The table is made from high-strength Meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. In addition, the table is equipped with hydrodynamic workpiece support. Additional features: - Automatic tool changer - Chuck with 8 jaws, power-actuated spindle, and hardened jaws - Including 40 bar coolant system with filtration unit - Hydraulic and lubrication systems by ATOS and Dropsa - Equipped with Heidenhain axis measuring system - Renishaw - NEW – with warranty & service via WMW AG

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 [mm] - Max. machining length: 195 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 8.2 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 25.4 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 8.2 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 Isdpfeuha U Hsx Aahstr - Driven tool speed: 5,000 [rpm] TOOL HOLDER 2 - Number of positions: 8 SUB OPERATIONS - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 7,500 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 2,912 x 1,300 [mm] - Machine height: 1,720 [mm] - Machine weight: 2,400 [kg] MACHINE HOURS - Power-on hours: 44,140 [h] - Operating hours: 28,118 [h] - Spindle hours: 15,281 [h] EQUIPMENT - Control: Fanuc 31i-B - 3-color status light - Driven tool motorization at: S11, S51 - Driven guide bushing - Parts catcher - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank: KNOLL KF 200/1200 * with high-pressure pump - Bar feeder: Tornos Robobar SBF 326 - Fire extinguishing system * NB: Functionality not guaranteed. To be checked by a qualified company engaged by the buyer.

Kondisi: sangat baik (bekas), Complete Desktop Metal 3D Printer System Here we offer you a complete Desktop Metal 3D printer system. Desktop Metal 3D Printer Studio System Complete system: 3D printer + debinding machine + sintering furnace Manufacturer: Desktop Metal The three-part solution comprises a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology Features: - Printed materials: Metal - Technology: FDM - Application: Industrial - Other features: Office-compatible - X-axis travel: 30 cm (12 in) - Y-axis travel: 20 cm (8 in) - Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, this printer extrudes bound metal rods—similar to an FDM printer. This eliminates the safety requirements commonly associated with metal 3D printing and enables new features such as the use of closed-cell infill for lightweight, strong parts. 1.2 Desktop Metal Studio Debinder (Debinding Machine) - Fully automatic debinding - Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low-emission design, it does not require external ventilation and is safe for office environments. Automatic fluid distillation and recycling means no refilling is required between cycles. Itjdjk Hz Nqspfx Aahor 1.3 Desktop Metal Studio Sintering Furnace - Hybrid technology (microwave & conventional heating elements) - Build volume: 305x205x205 mm - Carbon steel housing - Gas supply: 2 x 900 L gas cylinders - Heating power: 20 kW Features: - Function: Sintering - Configuration: Chamber - Heat source: Gas - Other features: High-temperature, automatic - Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through a standard office door, the furnace delivers industry-grade sintering in a package suitable for office environments. Built-in, material- and build-specific temperature profiles ensure uniform heating and cooling, avoiding residual stresses typical of laser-based systems. Condition: used / gebraucht Scope of delivery: (see picture) (Subject to modifications and errors in technical data, specifications are subject to change!) If you have further questions, we are happy to answer them by phone.