Squaring/Edgebanding Lines

STEFANI - MAHROS EVOLUTION SB ONE

Kondisi: diremaj di bengkel (bekas), DOUBLE-SIDED EDGE-BANDING AND FORMATTING MACHINE – 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transmission bar (Master & Slave systems) Safety and noise protection cabin FORMATTING UNITS (per side): Spray unit (for liquid anti-adhesive) Exchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (per side): Edging unit (Hot Melt + pre-melter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.) 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flat scraper unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Bodpfx Aljdh Tfgsrolp Free space

Kondisi: baik (bekas), Tahun pembuatan: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH EDGE TRIMMER (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 MACHINING CAPACITIES: - Panel height to be processed: 8 - 58 mm Thickness: 10 to 45 mm when using the corner rounder Bjderx S Ipopfx Alrslp - Panel length to be edged: 210 to 2500 mm - Minimum panel width to be processed: 90 to 1100 mm - Edge tape thickness (in coils): 0.4 - 3 mm without corner rounding, max 3 mm when using the corner rounder - Edge strip thickness (in strips): max 6 mm without corner rounding, max 3 mm with the corner rounder - Edge width: panel thickness + 2 mm on each side - Feed drive (feed speed): 11 m/min - Minimum panel distance: 600 mm - Panel overhang relative to transfer chain (panel projection): 30 mm MACHINE CONFIGURATION: - StarTouch control panel - Pre-set for barcode reader - Unwinding plate Ø800 mm - Frontal extension table - Easy Size: digital positioning of entry fence and panel height - Anti-adhesive spray unit - Edge trimmer (Rectifier RT-V) 12,000 rpm - Infrared panel pre-heating at entry - Gluing unit (VC-VM) with interchangeable glue pot for granulate, 1 kg capacity. Warm-up time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure unit (press) with 3 rollers, including 1 motorized and timed roller - End trimming unit, tiltable 0-20°, 12,000 rpm - Top/bottom flush trimming unit, digitally positioned with copying system. 1/4 radius 2 mm cutter (or bevel) 12,000 rpm - Corner rounding unit R2mm 12,000 rpm, digitally positioned - Top/bottom radius scrapers R1&2 mm, digitally positioned - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) ADDITIONAL CHARACTERISTICS: - Trimmer motors: 2x2 kW - Saw motors: 2x0.19 kW - Height adjustment motor: 0.30 kW - Feed drive motor: 1.1 kW - Flush trimming (milling) motors: 2x0.65 kW - CE marking - Lockable contactor, emergency stop buttons - Main power supply: 380V, 3-phase, 50 Hz - Pneumatic supply: 8-10 bar (max), dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Trimmers: 780 m³/h, Flush trimmers: 360 m³/h, Scrapers: 2x360 m³/h Maximum operational footprint: 10.80 x 2.40 m Transport dimensions (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tooling, manual, spare parts list, and schematics.

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE UNIT FOR LOT 1 Edge thickness in rolls (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 8 - 60 Control: ICOS open Feed rate m/min (adjustable): 7-35 Blsdpfx Asifnzdjlrsp Top pressure: V-belt driven, spray unit (for liquid non-stick agent) Adjustable fence: CNC controlled. Panel feeding system A2 / 30 Jointing unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing unit (P.U.R. glue + pre-melter) 2 - VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartments no.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spray unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 universal milling units (CNC controlled) for grooving/rebating and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Tahun pembuatan: 2017, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, FOM Industrie ARGO 70 3-Axis CNC Machining Center for Drilling and Milling Operations on Steel or Aluminum Profiles. TECHNICAL DETAILS X-Axis (top side only): 6,780 mm X-Axis (top side + heads): 6,630 mm Y and Z-Axis for processing on top and rear side: 545 mm x 295 mm Y and Z-Axis for processing on 3 profile sides: 440 mm x 295 mm Pneumatic Rotation: 0°, 90°, 180° Spindle speed: max. 17,000 rpm Profile width: max. 545 mm Bar length: max. 6,780 mm Number of milling spindles for aluminum: 1 Tool changer stations: 12 POSITIONING AND CLAMPING Vices with controlled and independent positioning: 4 Number of pneumatic clamps: 4 Max. number of vices: 8 MACHINE DETAILS Main motor: 6.5 kW Total power connection: 8.3 kW X-Axis speed: 100 m/min EQUIPMENT - Multi-part processing Bodpelu E Najfx Alrslp - Tool clamping system - Pendulum operation - Minimum quantity lubrication - Chip conveyor belt - Rigid tapping - Air cooling - Tool holder - Tool magazine with 12 positions at the head - Operator terminal with PC - 23” screen - 3D visualization for FomCam

Kondisi: bekas, nomor mesin/kendaraan: 005601, Jenis tepi yang dipasang: tepi tipis, tepi tebal Sistem lem: EVA, PUR Milling penyambung: ya Agregat multifungsi: ya Agregat milling atas: ya Kecepatan feeding maks: 40 m/menit Ketebalan papan maks: 60 mm Agregat kerja: 15 unit Blsdjp E I Uajpfx Alrep