Mesin pelapis tepi SCM

STEFANI SOLUTION 106

Kondisi: bekas, Abrichthobelmaschine-500mm Kedpfx Agjx Eykge Reww

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Numerical Control Smart Touch with Sintra HD Software Panel height: 10 – 60 mm Solid wood: 22 mm PVC/ABS: 3 mm Feed speed up to 25 m/min Working height adjustable electronically via CNC Motorized panel feed guide, electronically adjustable via CNC Anti-adhesive unit Pre-milling unit with 2 motors, electronically adjustable via CNC Coil holder plate for 1 position Gluing unit for EVA hot-melt glue with glue pot End trimming unit with 2 motors, equipped with dynamic extraction system following the blade movement Flush trimming/chamfering unit with staggered 2 motors, electronically adjustable via CNC Non-stick unit Corner rounding unit with 2 multifunction motors (chamfering + corner rounding) Electronic edge scraper unit, electronically adjustable via CNC Glue scraper unit Brush unit "SP-501" Automatic return system with bridge discharge Winner 4A Kwsdpfx Aowlbxleg Row

Kondisi: bekas, Tahun pembuatan: 2016, Vitap Eclipse Kantenanleimmaschine für runde und gebogene Werkstücke Halbautomatische Kantenanleimmaschine zur Bearbeitung großer runder oder gebogener Werkstücke mit einer Plattenstärke von 10 bis 60 mm und einer Banddicke zwischen 1 und 3 mm. Die maximale Plattenhöhe von 60 mm ist nur bei einer Kantenstärke von 1 mm möglich. Bei größerer Bandstärke ist dies abhängig von der Bandqualität und sollte im Zusammenspiel mit der Schneideinheit vorab getestet werden. Ksdpfx Agjwgb Hxo Rsww Ausstattung: - Zwei Kopierrollen zum Abtasten der Werkstückkontur - Leimstation - Leimbecken mit einem Fassungsvermögen von 1 kg - Zwei 800-W-Heizelemente mit elektronischer Temperaturanzeige über die SPS-Steuerung - Leimauftragung über Leimwalze - Leimbecken aus Aluminium für eine optimale Wärmeverteilung - Leimzulauf regulierbar per Knopfdruck - Automatische Schneideeinheit für Kantenmaterial von der Rolle von 3 bis 45 mm - Aggregat wird entweder durch Sensor für geschlossene Kantenumleimer mit perfektem Anschluss oder durch Encoder bei einseitiger Anleimung aktiviert - Lasersystem zur Längenermittlung – kein Vormessen erforderlich - Durchlauffunktion ein- und ausschaltbar - Höhenverstellbarer Tisch für schmale Platten - Fräsaggregat ein- und ausschaltbar - Zwei Kopierrollen zum Abtasten der Werkstückkontur - Fräsaggregat ausgestattet mit 2 x 0,5 kW (15.000 U/min, Hochfrequenz) mit Ober-, Unter- und Front-Kopierrollen - Fräsaggregat mit Messern R=2, Phase 15°, D=69, Z=6 - Große Plattendreheinrichtung mit Vakuum zur Produktfixierung (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Die besten Holzbearbeitungsmaschinen aus den Niederlanden De beste gebruikte machines uit Nederland

Kondisi: bekas, Tahun pembuatan: 2005, 2005 BIESSE ROVER B 4.40 FT Pusat kerja CNC 3-sumbu Spesifikasi teknis pada foto terakhir Kwsdpfx Aswmdynog Row Jam mesin menyala: 45.343 Jam kerja otomatis mesin: 27.267

Kondisi: bekas, nomor mesin/kendaraan: 006370, Type of attached edge: thin edge, thick edge Adhesive system: EVA Jointing milling: yes Multifunction unit: yes Kwjdpel Txw Hofx Ag Rjw Top milling unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 12 pcs

Kondisi: bekas, nomor mesin/kendaraan: 006279, Area kerja sumbu X: 3100 mm Kwjdpfx Aekw H Ekog Rsw Area kerja sumbu Y: 1250 mm Permukaan kerja: meja nesting Jumlah sumbu terkontrol: 3 sumbu Jumlah spindle bor: 11 Jumlah posisi alat: 8

Kondisi: sangat baik (bekas), Surface planer HA 4 Planing width: 450 mm Total table length: 2500 mm Infeed table: 1500 mm Machine height: 820 mm Max. chip removal: 15 mm Cutterhead speed: 4800 rpm Motor power: 4 HP Kodpfx Agsinkfns Reww Weight: 660 kg 3-knife cutterhead

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Three-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data entry via membrane keypad Electronic adjustment of the scoring unit Automatic parallel fence with adjustment via leadscrew and linear ball guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis, with corresponding fine adjustment. Angle detection system using magnetic strip and LCD display. Crosscut fence with 3 LCD displays Extendable support table with roller support Technical Data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scoring blade diameter mm: 120 Panel cuts with extendable fence mm: 3200x3200 Tilting range degrees: 0°/ +46° Max. saw blade cutting height at 90° mm: 150 Max. saw blade cutting height at +45° mm: 130 Kjdpfx Asyftzkjg Rjww Saw blade speed rpm: 2500, 3500, 5000 Scoring unit speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scoring unit power Hz 50 kW: 0.75 Cutting width with parallel fence mm: 1270 Weight approx.: 1180 kg Note for used machines: • Technical data and prior sale subject to change and errors excepted. • Prices listed are ex-location – loaded free of charge! • The machine has been cleaned and tested for functionality. • All machines are sold as seen without any warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your address and telephone number!)

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, System comprising: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM • Max. cutting length: 4,500 mm • Max. main saw blade projection: 95 mm • Max. opening of clamping grippers: 90 mm • Min. panel dimensions (from rear): 1,830 x 915 mm • Max. panel dimensions (from rear): 3,100 x 2,200 mm • Min. panel thickness for rear feeding: 3 mm • Worktable height: 985 mm • Main saw motor: 15 kW • Main saw blade diameter: 380 mm • Scoring saw motor: 2.2 kW • Scoring saw blade diameter: 200 mm • DIGISET: electronic adjustment from scoring to main saw • QUICK CHANGE: fast saw blade change at the push of a button • Saw carriage drive: 1–140 m/min • Integrated side aligner in saw carriage: 0–4,200 mm • Automatic measuring system for manual cuts • Pusher extension from 5,500 to 7,800 mm Kjdpfx Agsxranpe Rjww • 10 pneumatic double-finger grippers on the pusher • 3 front aligners • 16 support roller rails behind the machine table • 4 rounded air cushion tables in front of the machine table, incl. movement device for table 2 • Automatic ejection of end pieces beyond the cutting line • Material support surface under the pusher with brush-mounted rollers, designed for sensitive surfaces • Machine table with air jets for sensitive surfaces • Automatic device for main saw blade monitoring consisting of a sensor measuring saw blade deflection and a system for monitoring the main spindle speed Software package: — QUICKOPTI for cut plan optimization directly on the machine — VERSION OSI PLUS INTERFACE — OPTIPLANNING OPTIMIZATION SOFTWARE, incl. hardware dongle, enabling management of up to 10 network users — OS LABELLING: Graphical editor on the machine control with part drawing; real-time label printing on the machine possible — COMMUNICATION BETWEEN STORE FEED SYSTEM AND SELCO • Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8,000 mm • Rotatable suction frame 0–180° with controlled axis • Panel alignment/squaring system with 3 photocells mounted on pneumatic cylinders • Panel weight detection via load cell mounted on suction frame in the separation area; checks if panel weight is within expected range for the panel type. If not, the panel is returned and the separation cycle restarts. • Roller conveyor for stack infeed and outfeed: 4,200 mm Software: — LINE SUPERVISOR with warehouse mapping and catalog, import of processing data from optimizer, bill of materials management, and system control.

Kondisi: baru, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" configuration - Control console "eye-S" (control panel) - Human-Machine Interface software (HMI) "Maestro active edge" - Fine trimming and radius scraper unit, radius = 1 mm - Fine trimming and radius scraper unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer at the infeed fence - "SAVENERGY" kit - Interior lighting for the cabin and edging area - "Nesting" tracing rollers - Release agent spray unit "AAR" 1 - Edge finishing spray unit - Spray device for sensitive edges - Jointing unit "RT-V1" - "EASY SIZE" device - Glue application unit "VC-VM" - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - End trimming unit "K-2 Radius" - Bevel and radius trimming unit "R-HP Multiedge 2R" - Corner rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit, automatic straight/R/R positioning, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Surface scraper "RC-N" Kwsdpfx Ajwkf Iheg Rew - Buffing unit "SP-V" The machine is brand new and still in its original packaging. Promotional machine offered at a special price.