STETON INDEX

STETON INDEX

Kondisi: bekas, Tahun pembuatan: 2023, Double Glazing Bead Saw TRF 527 VIS CE 1 unit DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned on top of each other. The right saw unit is fixed, the left unit is adjustable; the set cutting length can be read from a digital display. Both units are equipped with supports, enabling the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process, the pneumatic clamping cylinders automatically swivel out of the way to simplify loading and unloading of the machine. STANDARD EQUIPMENT - Fixed right-hand aggregate - Digital measurement display - Pressure switch - 2 carbide-tipped saw blades - Electrical system with motor brake, undervoltage release, motor protection switch - Pressure switch - Tool kit - Safety devices with horizontal, swiveling clamping system Blsdpjxnlgcefx Ad Rof - Two-hand operation - Belt drive - Pneumatic aggregate lift - Central support TECHNICAL DATA - Motor power: 2 x 1.2 kW - Saw blade diameter: Ø 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90°: 55 mm - Max. cutting width at 45°: 40 mm - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm - Weight: 217 kg - Space requirements (standard configuration): 3,000 x 850 mm Extended cutting capacity: 1 unit Max. cutting length: 4,000 mm Star stop with four positions: 1 unit Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 unit Adaptations for rebated profiles: 1 unit Adaptations for rebated profiles as per drawing: - Fitting on the clamping devices to compensate for the profile inclination - Inserts on the rear stops of the saw units and on the central support In the sketch below (in green), a beveled pressure piece is shown, following the inclined profile and pressing it against the (red) insert at the stop. Location: Garbsen

Kondisi: bekas, Tahun pembuatan: 2021, Number of spindles: 5 pcs. Working width: 250 mm Planing height: 160 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min Control: K2 Basic 7" touchscreen KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm; spindle 4,500 up to 8,000 rpm - Width and height motorized positioning: left spindle radial top spindle axial Bedpfx Adjwgwmns Rjlf - Feed carriage motorized positioning - Additional motorized adjustments: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125-163 mm): 15 - 230 mm Working height (with tool diameter 125 mm): 10 - 160 mm (tool diameter up to 163 mm) 10 - 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Workpiece machining depends on the following operating parameters: Material, wood moisture, tooling, cutting depth diameter, and feed speed. Parameter adjustments may be necessary as required. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rebate device: diameter difference 20 – 25 mm to planing head Important: unit cannot be operated without a jointing cutter Extraction nozzle D = 125 mm Tool clamping system: quick-release nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Axial adjustment: 60 mm Tableplate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Tableplate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inv...

Kondisi: bekas, nomor mesin/kendaraan: 008116, de-001 Bjdsw Iddzepfx Ad Rjlf

Kondisi: bekas, Tahun pembuatan: 2018, hecht-es-350-glasleistensaege-de Bjdevpr N Ropfx Ad Relf

Kondisi: bekas, Tahun pembuatan: 2009, lebar total: 1.800 mm, tinggi total: 1.650 mm, Empty weight: 2,400 kg Dimensions (L x W x H): 350 x 180 x 165 cm Motor Configuration: Bottom, 5.5 kW Right, 5.5 kW Left, 5.5 kW Top, 7.5 kW Bottom, no motor, but optional spindle - Year of manufacture: 2009 - Documentation available: Yes - CE certificate available: No - Serial number: AA2/001125 - Number of spindles [pcs]: 4 - Spindle 1: - Spindle diameter [mm]: 40 - Spindle 2: - Spindle diameter [mm]: 40 - Spindle 3: Bljdpfx Aswnh Ired Rsf - Spindle diameter [mm]: 40 - Spindle 4: - Spindle diameter [mm]: 40 - Min. planing width [mm]: 25 - Max. planing width [mm]: 240 - Min. planing height [mm]: 6 - Max. planing height [mm]: 120 - Infeed table length [mm]: 2000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 2.2 - Extraction port diameter [mm]: 120 - Voltage [V]: 400 - Power consumption [A]: 58 - Fuse [A]: 63 - Transport dimensions: 3500mm x 1800mm x 1650mm (l x w x h) - Transport weight [kg]: 2400kg - Transport packages [pcs]: 1 Financial information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for business customers Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 114550, lebar kerja: 230 mm, tinggi penyerutan: 120 mm, jumlah spindel: 6, Planer and moulder Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control as well as the proven PowerLock quick-change system, and additionally features a mechanization for recirculating the planed parts — ideal for efficient production. Bodpfjx Sxfvox Ad Rolf Machine equipment 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock Working width: 20 – 230 mm Working height: 8 – 120 mm Work table: 2.5 m (including jointer fence) Top pressure rollers spring-loaded Side pressure pneumatic Frequency-controlled feed with brake, feed speed: 5 – 30 m/min Reduced distance between feed rollers at feed units (400 mm) Additional feed rollers and reduced roller distance Durofer steel roller, self-cleaning Infeed roller before 1st bottom tool pneumatic Siemens / Powercom control The machine is in very good, well-maintained condition, has been operated professionally and serviced regularly, and will remain in operation until 17.12.2026. Inspection of the running machine is possible at any time by arrangement. The technical description and machine layout can be found in the documentation.

Kondisi: bekas, Tahun pembuatan: 2021, Number of spindles: 5 units Working width: 230 mm Planing height: 160 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 6–24 m/min Control system: K2 Basic 7" touch panel KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE ----- AS NEW, DEMO MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency controlled 4,000 – 6,000 rpm - Width and height positioned by motor: left spindle – radial upper spindle – axial - Feed beam positioned by motor DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125 – 163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (tool diameter up to 163 mm): 10 – 160 mm Minimum workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Processing of workpieces depends on the following operational parameters: Material, wood moisture, tools, depth of cut, and feed speed. Adjustments to operating parameters may be necessary, if applicable. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rabbetting device: diameter difference 20–25 mm to the planing head Important: System cannot be operated without the jointing rabbet cutter Extraction port D = 125 mm Tool clamping system: Quick-clamp nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length: approx. 6 mm Speed, frequency-controlled: 4,000 – 6,000 rpm Tool diameter: 112 – 200 mm Adjustment travel (axial): 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamp nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length: approx. 6 mm Blsdpfx Adewgwmho Rof Speed, frequency-controlled: 4,000 – 6,000 rpm Tool diameter: 112 – 200 mm Adjustment travel (axial): 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamp nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length: approx. 6 mm Speed, frequency-controlled: 4,000 – 6,000 rpm Tool diameter: 112 – 200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamp nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length: approx. 6 mm Speed, frequency-cont...

Kondisi: sangat baik (bekas), working width 230 mm working height 120 mm 6 spindles spindle arrangement: bottom/right/left/top/top/bottom spindle speed 6000 rpm infinitely variable feed speed up to 30 m/min pneumatic pressure rollers POWERCOM control infeed table length 2470 mm Bjdpfjpccy Asx Ad Rolf

Kondisi: baik (bekas), Tahun pembuatan: 2015, used, in good condition Year of manufacture: August 2015 (commissioned end of 2016) Technical Description Working width (with cutter circle 125 mm): 20 - 230 mm Working height (with cutter circle 125 mm): 8 - 120 mm Six standard upper feed rollers, pendulum type Two powered table rollers 1st Spindle First lower horizontal spindle Motor with brake 5.5 kW (7.5 HP) Diameter 40 mm Speed 6000 rpm Cutter circle 125 - 145 mm Grooving device, incl. groove cutter 2nd Spindle First right vertical spindle 5.5 kW (7.5 HP) Individual motor with brake Diameter: 40 mm Speed: 6000 rpm Cutter circle 40 mm below table level: 100 - 200 mm Cutter circle 55 mm below table level: 100 - 180 mm Max. tool diameter behind fence level: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm 3rd Spindle First left vertical spindle Individual motor with brake 7.5 kW (10 HP) Diameter 40 mm Speed 6000 rpm Cutter circle 40 mm below table level: 100 - 200 mm Cutter circle 55 mm below table level: 100 - 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm 4th Spindle First upper horizontal spindle Motor with brake 7.5 kW (10 HP) Diameter 40 mm Speed 6000 rpm Cutter circle 112 - 200 mm Cutter circle for straight knife heads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Split pressure shoe before upper spindle, adjustable to cutter circle and can be swung away from the tool, spring loaded. 5th Spindle Second upper horizontal spindle Motor with brake 7.5 kW (10 HP) Diameter 40 mm Speed 6000 rpm Cutter circle 112 - 200 mm Cutter circle for straight knife heads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Split pressure shoe before upper spindle, adjustable to cutter circle and can be swung away from the tool, spring loaded. Bjdpfxequ Sc Hs Ad Rolf 6th Spindle Second lower horizontal spindle Motor with brake 7.5 kW (10 HP) Diameter 40 mm Speed 6000 rpm Cutter circle 112 - 200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Spindles in general All profile spindles are dynamically balanced for high concentric running accuracy. Feed system Frequency-controlled feed 5 - 30 m/min, steplessly adjustable with brake, 4 kW (5.5 HP) Machine base, tables and fences Manual lubricant pump for de-resining of the table Machine operation Memory function For storing the setting values of profiles. Spindle axes with electronic dual readout. Function: - Store the setting values of the machined profile at the press of a button under a profile number - Upon re-selection of the profile number, the electronic dual displays show the setting values - By manually adjusting the spindle, the displays are brought into alignment - 99 memory slots Electrical height adjustment of the feed Centralized lubrication points on the front of the machine

Kondisi: bekas, Tahun pembuatan: 2010, 001 Bledpfx Ajwmggkod Rof