Forklift LPG

Still R70-40 // Hubhöhe 4,97m // Treibgas

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer best-in-class sawing technology and outstanding performance when cutting special steels. - The electrically-welded machine frame and the steel saw frame meet all cutting requirements, eliminating vibrations and noise. - The chip conveyor is hydraulically driven and has adjustable speed. - All machine movements (saw frame, vice, feed, and saw band guides) occur via modern linear guides with high static and dynamic load capacities, ensuring minimal sliding friction. - Another characteristic feature are the rollers for material positioning, powered by a hydraulic motor. These move perpendicular to the material to ensure optimal clamping. - Thanks to adjustable saw band height control, the operator can position the band close to the material’s top edge. After the cut, the band automatically returns to its previous position, or, optionally, can remain in the lower position. During the cutting cycle, the software compares the cutting load to the preset values, allowing the saw system to halt automatically in case of irregularities. - The saw band is cleaned by two adjustable steel brushes with hydraulic drive. - The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. - Finely ground carbide inserts securely clamp the saw band and are complete with lateral, hardened, and adjustable guide rollers. The adjustable blade guide travels automatically as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, managed by the machine software. Tension is automatically released after a preset time when the machine is idle or following a completed cycle. - Automatic version with CNC control available in X-TECH 900 / 1200 models, featuring a 500 mm feed stroke, ideal for high-production series. Nsdpefg E Hpefx Agyjwp - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, enabling precise material positioning even at maximum load. - All guided movements are driven by four recirculating ball guides with high static and dynamic load capacities, significantly reducing feed friction. The guides are hardened, ground, and prismatic. Price on request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Zeppelin diesel generator set type PPO2000-C32 Year of manufacture: 2007 / Engine year: 2014, completely overhauled Nwodjizbdajpfx Agysp 2 pcs. CAT C32 diesel engines 400 Volts, 50 Hz 1600 kW, 2000 kVA 1500 rpm Dimensions (L/W/H): 11 m / 2.3 m / 3.2 m Weight: 26 t

Tahun pembuatan: 1972, Kondisi: baik (bekas), Generator set, emergency power generator, generator, power unit, power generator, genset, standby generator, power generation unit -Manufacturer: PILLER/MWM Nwsdjivql Ijpfx Agyjp -Power output: 730 kVA 50 Hz -Engine: MWM Type TbRHS 518V16, Output 850 HP, Speed 1500 rpm -Generator: PILLER NKTB 4-1158 -Note: without control system -Individual components: see photos -Transport dimensions: 6 loading meters -Total weight: 8,600 kg

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Nwedpfx Agsvvkfdsyop Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Tahun pembuatan: 2020, Kondisi: diremajakan ulang (bekas), dear-customers-our-experience-has-shown-that-communication-by-e- mail-usually-unnecessarily-drags-things-out-we-want-to-help-you-q uickly-and-its-better-to-talk-for-three-minutes-on-the-phone-than -to-send-e-mails-back-and-forth-for-three-days-tswc-30-20-dry-spr ay-booth-dimensions-3000-x-2000-mm-w-x-h-fan-mounted-at-the-top-a irflow-10-800-m3-h-motor-2-20-kw-explosion-proof-exhaust-duct-500 -mm-diameter-depth-900-mm-double-filtration-paper-filter-paintsto p-filter-mat-with-clamping-rail-180-eur-net-extra-options-additio nal-costs-paintstop-filter-mat-with-clamping-rail-180-eur-net-sid e-baffles-with-hinges-590-eur-net-photos-may-vary-we-also-offer-c omplete-spray-rooms-with-supply-air-system-heat-exchanger-supply- air-ceiling-piping-etc-just-contact-us Nodpfofn Nddsx Agyswp

Kondisi: bekas, Tahun pembuatan: 1988, nomor mesin/kendaraan: 1743, UV coating machine Billhöfer Gula Speed CGS JKN 112, year 1988 – Serial No. 1743 Minimum sheet size: 300 x 500 mm Maximum sheet size: 820 x 1120 mm Automatic Mabeg feeder Paper weight: 60 up to 500 g/m² cardboard Online video inspection possible via Skype Nodpfeh Axqujx Agyewp We would be pleased to welcome your visit – further machines in stock Available immediately – Inspection possible Located in Emskirchen / Nuremberg – Test run possible

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, EN-001 Nsdoxdt Umspfx Agyowp

Kondisi: bekas, Tahun pembuatan: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total connected load: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double upper pressure for workpiece stability Electronic thickness adjustment Feed frequency inverter Automatic lubrication of feed chain Automatic motor calibration Touchscreen control system Emulsion spray at both infeed and outfeed Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized cutting depth adjustment Gluing unit Application of glue or hot air Nsdpfx Agjv Szt Deyewp Heated coating roller Quick-change of complete unit Automatic positioning via motor 3 pressure rollers Edging speed: 14 m/min End trimming unit Double-motor unit with automatic tilting Tilting up to 15° THK prismatic guideways Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change via servomotor Electromagnetic horizontal movement Vertically hydraulically damped movement

Kondisi: bekas, jarak tempuh: 410.000 km, daya: 309 kW (420,12 hp), tipe perpindahan gigi: otomatis, jenis bahan bakar: diesel, warna: putih, berat keseluruhan: 37.000 kg, konfigurasi gandar: 3 gardan, pendaftaran pertama: 02/2010, kelas emisi: Euro 4, Perlengkapan: mengalami kecelakaan, pendingin udara,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 27.500 h, Jam operasional: 27.500 jam Laser aktif: 17.000 jam Resonator: 5KW Harga atas permintaan Nwedsxbfvwspfx Agyep