Mesin cetak injeksi

STORK IMM 5500-5600

Kondisi: baik (bekas), Tahun pembuatan: 2013, gaya penjepit: 16.000 kN, Perlengkapan: dokumentasi / manual, machine_spec_001 Fsdpfx Aneyh I Emolsgg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping platen size (H x V): 1,168 x 1,144 mm Fodpfxey Hmfye Anljgg Clear tie-bar spacing (W x H): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke is programmable Installed barrel heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Type: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console mounted on fixed platen Gripper function R1 (C-) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle area protection; • High-speed, position-controlled screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection moulding machine comes fully equipped!! Condition: As-new condition, only 5,290 operating hours.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 60.244 h, gaya penjepit: 6.500 kN, diameter sekrup: 105 mm, lebar total: 2.300 mm, tinggi total: 2.700 mm, berat keseluruhan: 20.000 kg, panjang produk (maks.): 8.000 mm, Engel DUO 7050/650 pico ini diproduksi pada tahun 2013. Mesin ini memiliki gaya penutupan sebesar 6.500 kN, volume injeksi maksimum 4.160 cm³, dan diameter screw 105 mm. Mesin dilengkapi dengan antarmuka robot (Euromap 67) dan berada dalam kondisi sangat baik. Jika Anda mencari mesin injeksi plastik berkualitas tinggi, mesin Engel DUO 7050/650 pico yang kami tawarkan layak untuk dipertimbangkan. Silakan hubungi kami untuk informasi lebih lanjut mengenai mesin ini. • Volume injeksi maksimum: 4.160 cm³ • Tinggi cetakan minimum: 450 mm • Tinggi cetakan maksimum: 950 mm • Jarak buka platen: 1.400 mm • Dimensi platen penjepit (P × L): 1.510 × 1.440 mm • Jarak antar kolom: 1.100 × 960 mm • Daya motor: 161 kW • Daya pemanas: 73,9 kW • Jumlah pin listrik: 32 • Radius nozzle (di ujung): R35 • Diameter cincin pusat: 200 mm • Jumlah core: 0 • Jumlah zona pemanas: 0 • Tahun pembuatan: 2013 • Jam operasi: ca. 60.244 jam Fjdpfx Asx Nr R Henlegg • Kondisi: Sangat baik • Status: Masih produksi Fitur Tambahan • Dilengkapi robot: Ya • Antarmuka robot: Euromap 67

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Stock No. 13602 Manufacturer: Krauss Maffei Machine type: KM 650 – 8000 CM Year of manufacture: 1997 Operating hours: 80,000 h Fgjdpoub S R Hsfx Anlsg Control system: MC 3-F Screen language: German Location: D-52249 Eschweiler Clamping unit: Clamping force: 6,500 kN Maximum mold opening force: 346 kN Platen opening force (moving platen): 169 kN Platen closing force (moving platen): 144 kN Clamping plate size (H x V): 1,704 x 1,700 mm Clearance between tie-bars (H x V): 930 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 600 mm Daylight opening: 1,750 mm Ejector stroke: 250 mm Ejector force forward/back: 226 kN Injection unit: Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Shot volume: 6,172 ccm Shot weight (PS): 5,617 g Plasticizing rate: 1,540 ccm/s Screw speed: 138 rpm Plasticizing output: 238 g/s Nozzle contact force: 246 kN Electrohydraulic equipment: Nominal pump motor power: 132 kW Installed heating power: 70 kW Number of heating zones (barrel): 7 Dimensions and weights: Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - 2 x hydraulic core pulls on fixed platen - 2 x hydraulic core pulls on moving platen - 8 x hot runner control zones - Robot interface according to Euromap 67

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 862-1053, plastic-injection-moulding-machine-mannesmann-demag-ergotech-500 0-2300 Fgedpfx Aoygikwsnlog

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Perlengkapan: dokumentasi / manual, demag-systec-100-420-310-2015 Fjdoyg Eu Sopfx Anlogg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 70.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, Clamping force: 6500 kN Max. mold opening force: 346 kN Movable platen opening force: 169 kN Movable platen closing force: 144 kN Clamping platen (H x V): 1520 x 1470 mm Clear width between tie bars (H x V): 1000 x 930 mm Mold opening stroke: 1150 mm Minimum mold installation height: 600 mm Max. daylight: 1750 mm Ejector stroke: 250 mm Ejector force forward/back: 95 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Shot volume: 3367 ccm Shot weight (PS): 3064 g Injection flow rate: 690 ccm/s Screw speed: 153 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Fgjdsx Hzzcepfx Anlsg Rated drive power, pump motor: 90 kW Installed heating capacity: 50 kW Heater zones, barrel: 7 Dimensions and weight: Space requirement approx.: 9.83 x 2.90 x 2.80 m Total weight: 43,170 kg Accessories: - Anti-vibration elements - Krauss Maffei Robot LR300 X: 1200 mm, servo motor driven Y: 1000/1000 mm, telescopic, servo motor driven Z: 3500 mm, servo motor driven C: 0 - 90°, pneumatic - Conveyor belt - Safety enclosure Additional equipment: - 1 x air valve - 6-fold pneumatic cascade control - 12 x hot runner zones - 2 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 54.319 h, gaya penjepit: 16.000 kN, diameter sekrup: 135 mm, berat injeksi: 7.450 g, Mesin cetak injeksi hidraulik 3 sumbu tipe Krauss Maffei 1600-17200MC ini diproduksi pada tahun 2001. Mesin ini memiliki gaya penjepit sebesar 16.000 kN dan diameter sekrup sebesar 125 mm. Mesin ini memiliki berat injeksi maksimum sebesar 7.450 g dan ukuran pelat sebesar 2.600 x 2.110 mm. Jika Anda mencari kapasitas cetak injeksi berkualitas tinggi, Anda dapat mempertimbangkan Krauss Maffei 1600-17200MC yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Unit injeksi: 17200 • Jarak antar kolom (T x L): 1600 × 1250 mm • Ukuran pelat (T x L): 2600 × 2110 mm • Ruang bebas (x × y): 1800 × 1400 mm • Langkah pembukaan cetakan maks.: 2.500 mm • Tinggi pemasangan cetakan (min.–maks.): 900–1.600 mm • Lebar pembukaan: 3.400 mm • Gaya pembukaan cetakan: 1.108 kN • Gaya pelat bergerak: Pembukaan 177 kN / Penutupan 153 kN Fsdpfx Ajyyyr Tsnlegg • Langkah ejektor: 300 mm • Gaya ejektor (maju/mundur): 415 / 177 kN • Tegangan operasi: 400 V / 50 Hz • Arus motor: 446 A • Arus pemanas: 164 A • Total jam operasi pompa: 75.125 jam Peralatan tambahan • Sistem robot Wittmann W650 (2001) • Jangkauan X 1.500; Y 2.600; Z 3.500 • Set silinder/sekrup cadangan (1 set) • Sistem pendingin internal • Penarik inti (2 buah)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, DEMAG System 800/1120-9500 Injection Moulding Machine Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of Manufacture: 2008 Clamping Unit Clamping Force: 8,000 kN Tie Bar Distance (horizontal × vertical): 1120 × 1000 mm Platen Size (horizontal × vertical): 1620 × 1500 mm Minimum Mold Height: 500 mm Maximum Mold Height: 1050 mm Maximum Distance Between Platens: 2080 mm Maximum Mold Weight: 7,200 kg Opening Stroke: 1,030 mm Ejector Stroke: 350 mm Ejector Force: 139 kN Injection Unit Screw Diameter: 130 mm Shot Volume: 7,300 cm³ Shot Weight (PS): 6,640 g Maximum Injection Pressure: 1,300 bar Screw L/D Ratio: 20 L/D Electro-Hydraulic Equipment Pump Motor Rated Power: 110 kW Heater Power: 79 kW Hydraulic Oil Tank Capacity: 1,300 l Machine Dimensions and Weight Machine Dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine Weight: 33,500 kg Control Cabinet Weight: 9,700 kg Optional ESS (Energy Saving System) The machine can be equipped with a modern ESS servo drive system that increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, which adjusts the motor speed to the actual demand during the production cycle. As a result, electric power is consumed only when the machine requires it. Main Benefits - Reduction of electric energy consumption by up to 30% - Servo-driven hydraulic pump technology - World-class, proven technology used in plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Extended service life of hydraulic components Fsdpfx Asyugctsnlsgg - Possibility of installation in existing hydraulic injection moulding machines The ESS system allows for significant reduction of operating costs while maintaining full production parameters.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Stork S+ 9000-12550 Injection Moulding Machine Control system: CDS700 Year of manufacture: 2011 Clamping Unit: Clamping force [kN]: 9000 Platen dimensions (H x V) [mm]: 1570 x 1560 Tie bar spacing (H x V) [mm]: 1010 x 1010 Min./max. mould height [mm]: 300…1190 Maximum daylight opening [mm]: 2290 Locating ring diameter [mm]: 250 Maximum ejector stroke [mm]: 300 Injection Unit: Screw diameter [mm]: 115 Injection volume [cm³]: 6232 Shot weight in PS [g]: 5733 Injection pressure [bar]: 1740 Maximum injection speed: 300 Additional Equipment: Fodpfewrna Aox Anljgg Pneumatic valve – 6 pcs. Core pull – 1 pc.