GERGAJI PENDULAR PNEUMATIK 10HP

Stromab PS 600/P

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 0x0x0 mm Weight: 650 kg Total power requirement: 7.5 kW Pendulum Saw PENDELSÄGE PS-600-P - Cutting height: 210 mm - Cutting width at 90°: 460 mm - Cutting width at 45°: 330 mm - Cutting width at 60°: 200 mm - Motor: 7.5 kW - Voltage: 400 V / 50 Hz - Speed: 2,100 rpm - Saw blade diameter: 600 mm, bore 30 mm - Mitre adjustment: 90° - 45° / + 45° - Oil-pneumatic feed - Two-hand safety control - Extraction nozzle diameter: 150 mm Kedpfx Aasvz H Apohofa - Incl. 1 m infeed roller conveyor with right-hand stop rail - Incl. 1 m outfeed roller conveyor with left-hand stop rail - Incl. pneumatic workpiece clamp - CE compliance - Weight: 650 kg

Kondisi: baru, Neues Gerät, hergestellt in Dänemark. Hebedauer: 18 Sekunden. Be- und Entladen mittels Palettenhubwagen. Die Lasten werden auf eine ergonomisch korrekte Arbeitshöhe angehoben. Fernbedienung für Heben/Senken mit Not-Aus-Funktion. Leistungsaufnahme: 0,75 kW. Kfsdpfxjd Hp Efe Aahoa Tragfähigkeit: 1000 kg. Spannung: 3 x 400 V. Minimale Hubhöhe: 80 mm. Maximale Hubhöhe: 780 mm. Außenmaße: 1420 x 1140 mm. Innenfreiraum: 585 mm. Hub- / Senkgeschwindigkeit: 42 / 48 mm/s. Gewicht: 235 kg.

Kondisi: bekas, Pemasaran dilakukan karena insolvensi. Seluruh instalasi dibeli pada tahun 2021 dan hanya beroperasi sekitar 3 tahun. Merek: Randek (Swedia) Tahun produksi: 2021 1. Gergaji Tipe: SPL 728 X04 Kontrol: Beckhoff, layar sentuh Bahasa: lihat foto Pemotongan sudut: 0°–360° Pemotongan miring: 90°–28° Ketebalan material maks.: 250 mm Diameter mata gergaji: 700 mm Daya: 7,5 kW 2. Unit pengumpan dengan sistem penumpukan, kanan Tipe: UV130F2X05 Panjang: 13 m Kfodpfoxqpqkjx Aahsa Meja angkat: 4.000 kg 3. Unit pengeluaran dengan sistem penumpukan, kiri Tipe: IH106F1X01 Panjang: 10,60 m Meja angkat: 5.500 kg 4. Printer label Merek: ZEBRA Dimensi keseluruhan instalasi sekitar: Panjang 24 m x lebar 3 m

Kondisi: baru, Tahun pembuatan: 2025, en Kfsdporicl Hefx Aahoa

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments Kodpfxeqt Dmys Aahofa - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Kondisi: bekas, Tahun pembuatan: 1997, Drilling capacity in steel (diameter): 40 mm Arm reach: 1,000 mm Max. workpiece height: 1,250 mm Table size: 1,150 x 690 mm Spindle taper: MT 4 Spindle speeds: 40 - 1,400 rpm Feed range: 0.08 - 0.40 mm/min Horizontal arm travel: 800 mm Vertical arm travel: 700 mm Spindle stroke: 220 mm Kfodpel Ha Twsfx Aahea Drive power: 3.5 kW Operating voltage: 380 V Total power requirement: 4.0 kW Machine weight approx. 1.6 t - Factory No.: A01/446/97 - Adjustable cube table 600 x 500 x 500 mm - Coolant device - Machine lamp

Kondisi: baik (bekas), Tahun pembuatan: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of Manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss and house manufacturers worldwide. The SP700 saw is efficient, easy to operate, and precise. It has long been established on the market and is continuously improved in close collaboration with numerous customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you require. The large saw blade diameter (700 mm) also allows you to cut multiple sections of stacked timber simultaneously. - Mitre cuts from 0° to 360° Kfedpeh Ayyqofx Aahja - Cutting heights up to 250 mm, three boards can be cut per cycle - PLC-programmable saw - Wood fixation close to the cutting area for precise results Roller conveyor system with 5 adjustable pneumatic stops. Length 6.25 m Discharge roller conveyor 4.10 m Complete line: 11.5 m Technical information subject to change.

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirement approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Band Saw K-tech DG 50/33 HA-I - 2-column miter band saw - Robust, yet easy to operate - Material height sensor (automatic cut start recognition) - Smooth running due to inclined cutting, feed regulator, and cutting pressure regulator Kjdpfx Aajfg E Hlehjfa - Heavy-duty material infeed roller - Removable chip tray (can be disinfected) - Energy-saving and low vibration thanks to angled cutting - Ergonomic, secure, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min - Hydraulic cutting pressure control valve - Hydraulic control of saw frame and vice - LEDs for monitoring all safety functions - Large-diameter drive wheels (520 mm) - Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid downfeed until material is detected or immediate cutting for serial production 4. Stop saw band 5. Raise frame just above the material 6. Open vice

Kondisi: baru, Tahun pembuatan: 2025, Kartonhülsenwickelmaschine für Toilettenpapierrollen Spezifikationen: • Kartonbahn-Breite: 60 – 76 mm • Produktionsgeschwindigkeit: 35 – 40 m/min Kfedeit N Rvopfx Aahja • Hülseninnendurchmesser: 40 mm – 80 mm • Lagenanzahl: 2, 3, 4 Lagen (weitere optional) • Abschneidelänge: 600 – 2900 mm Ausstattung/Merkmale: • Betrieb wahlweise mit Heiß- oder Kaltleim • Wechselbare Dornaufnahmen (für verschiedene Hülsengrößen) • Quetschschnitt über zwei oder drei Rundmesser mit synchronisierter Bewegung • Elektronisch, stufenlos regelbare Geschwindigkeit (Drehstrom)

Kondisi: baik (bekas), Tahun pembuatan: 1994, 2-sided planer, top and bottom Kedpfx Aehuthyjahsfa Constant table height (always consistent feed height) Max. planing width: 600 mm Max. planing height: 280 mm Cutterheads with strip knives Immediately ready for operation