Gergaji potong optimasi Stromab TR 500 tahun 2016

Stromab TR 500

Kondisi: bekas, Tahun pembuatan: 2022, tinggi total: 1.700 mm, panjang total: 10.000 mm, lebar total: 1.800 mm, de-hu-001 Kdedpfxeyna Ene Ag Rsi

Kondisi: bekas, Tahun pembuatan: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood, featuring automatic identification and removal of wood defects. Technical data: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Order number: 0682-10 Supply voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Protection: 25 A Kjdswtgcxopfx Ag Rjdi Condition: used

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 1377, USED STROMAB TR 500 PNEUMATIC CROSSCUT SAW – CE COMPLIANT - Equipped with TIGERSTOP electronic positioning stop, 4000 mm - Infeed roller table, 4500 mm Kdjdpfx Agst U Izps Roi - Outfeed roller table, 4500 mm - Blade diameter: 500 mm - Maximum cutting capacity: 360 mm (W) x 60 mm (H); 135 mm (H) x 280 mm (W) - Motor: 10 HP - 415 Volt - Serial No.: 1377 - Year: 2007

Kondisi: baru, Tahun pembuatan: 2026, Crosscut saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Worktable inclined at 8° Technical features of the cutting unit: Pneumatic upstroke saw TR500 Motor power: 10 HP (7.5 kW), 400 V/50 Hz TCT blade diameter: 500 mm, F=30 Z=144 S=4.6 Cutting cycle time: 4 seconds Ksdpfx Ashw Ng Isg Redi Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed by rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for a bundle weight of up to 80 kg Maximum speed of the push-feed system: 90 m/min Pneumatic lift of the pusher at the end of the cutting cycle and overhead return. Data entry management: 12-inch TOUCH SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Edit and enter cutting cycles (patterns) directly on the controller Transfer of cutting lists created on PC via USB or Ethernet port Working software: Manual entry of bundle length Partial optimization without board length reading Cutting cycle with 3 optimization options (maximum length, sequence, and board sequence) 1000 cutting lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization. Piece length reading via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board sequence, volume, minimal waste, and priority length) "OPTI PLUS" package: full optimization with knot and defect removal (OPTION NOT INSTALLED ON THIS MACHINE) Technical description: "OPTI PLUS" package: for the removal of knots and defects Photocell for reading knots and defects for wood mapping Marking with fluorescent chalks/crayons (Note: Only orderable in combination with ZA250) Pneumatic side clamping device Program for creating lists on PC in XML format

Kondisi: baru, Vollautomatische Blockschneidemaschine für Palettenklötze. Maximale Länge des Rohmaterials: 6 m. Die Maschine ist für jede Art der Palettenproduktion geeignet. Die OKKR-2006 kann als eigenständig stehende Maschine oder als Bestandteil einer Produktionslinie betrieben werden. Ksdpewdutmjfx Ag Rsdi Funktionsweise: Das Blockmaterial wird über das Ketteneinlaufband in die Maschine eingezogen. Die Zuführung erfolgt automatisch; die Maschine schneidet die Blöcke in die voreingestellte Länge. Die OKKR-2006 kann programmiert werden, verschiedene Blocklängen aus dem Ausgangsmaterial abzulängen. Die maximale Länge des Rohmaterials beträgt dabei 6 m. Abmessungen der geschnittenen Blöcke: - Min. / Max. Länge: 600 mm – 6.000 mm - Min. / Max. Breite: 75 mm – 150 mm - Min. / Max. Höhe: 75 mm – 100 mm Technische Daten: - Bedienpersonal: 0 - Länge: 7,5 m - Breite: 2,5 m - Höhe: 1,8 m - Anschlussleistung: 7 kW, 3x400 V+N - Pneumatik: 7 bar, getrocknete Druckluft: 450 l/min - Wartung: Schmierstellen müssen gefüllt und überwacht werden - Maschinenleistung: 36 Blöcke/min Serienausstattung: - 1 Elektromotor für das Sägeblatt - 1 Elektromotor für den Materialvorschub - 1 Elektromotor für den Ketteneinlauf Mychrome bietet verschiedene zusätzliche Maschinenmodule an, die problemlos an bestehende Maschinen angedockt werden können, um den Automatisierungsgrad weiter zu erhöhen. Die Möglichkeit, Design und Größe der Paletten zu variieren, bleibt dank dieser Erweiterungsmodule erhalten.

Kondisi: bekas, Tahun pembuatan: 2005, tinggi total: 1.750 mm, panjang total: 1.350 mm, lebar total: 1.350 mm, optimierkappsaege-2024-tr500 Kedpfx Aswq U Dxog Rjdi

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 0x0x0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully optimizing automatic cross-cut saw TR-500 MATRIX-6000 - Motor drive power: 7.5 kW - Saw blade diameter: 500 x 30 mm, Z=144 - Cutting capacity according to cut diagram - Cutting capacity: 135 x 280 mm - Cutting capacity: 125 x 295 mm - Cutting capacity: 95 x 325 mm - Cutting capacity: 80 x 340 mm - Cutting capacity: 55 x 360 mm - Cutting cycle: 4 seconds - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety guard over cross-cutting unit - CE compliant - Weight: 1000 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x diameter 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Air velocity at center of extraction port: approx. 25–35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Pusher speed: 90 m/min - Drive via brushless servo motor - Feed system with precision rack-and-pinion and length measurement via servo motor Kdjdpfev A Htdjx Ag Rei - Pneumatic lifting of the pusher at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Worktable inclination: 8° - Positioning tolerance: +/- 0.4 mm Control: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly at the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 sequential dimensions - 3 optimization options (maximum length, sequence, and workpiece sequence) - 3 optimization options (volume, minimum waste, and priority) - Standard USB and Ethernet ports - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal solution for processing material with variable lengths, with single or bundle infeed - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimum waste, and priority) - Includes OPTI PLUS function for detecting markings, ensuring full optimization and removal of knots and defects. - Markings with chalk Options: - Pneumatic side clamp: €850.00 - Creation of cutting lists on PC: €360.00 - Outfeed table: €360.00/m

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, RANDEK FORGÓ KERESZTVÁGÓ FŰRÉSZ Ksdpfx Aevryhgog Rjdi

Kondisi: bekas, STROMAB TR 500 – Under-table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw featuring a pneumatic saw blade feed and a blade diameter of 500 mm. This machine is ideally suited for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine number: 3229 ——— Technical Data • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg ——— Condition & Delivery The machine is in excellent technical condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on pallet via freight forwarder possible at short notice ——— Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus 19% VAT, subject to changes and errors. Kjdpfx Ajxiza Uog Redi

Tahun pembuatan: 1984, Kondisi: sangat baik (bekas), Blade diameter: 550 mm Minimum cutting length: 500 mm Minimum cutting width: 100 mm Maximum cutting height: 160 mm Minimum cutting height: 40 mm Kjdolrtntspfx Ag Rsdi Pneumatic clamps