Optimierkappsägen Stromab TR 500 2022

Stromab TR 500

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 241306, diameter mata gergaji: 500 mm, ketinggian potong (maks.): 170 mm, lebar pemotongan (maks.): 395 mm, daya: 7,5 kW (10,20 hp), diameter sumur bor: 30 mm, RINCIAN TEKNIS Lebar potong maks.: 395 mm Tinggi potong maks.: 170 mm Diameter mata gergaji min.: 490 mm Diameter mata gergaji maks.: 500 mm Diameter lubang mata gergaji: 30 mm Panjang meja masuk: 5.640 mm Panjang meja keluar: 1.180 mm Kecepatan pengumpanan: Otomatis RINCIAN MESIN Tegangan: 400 V Gedpfoy Akvnex Ahujbk Konsumsi arus: 16,5 A Sekering: 32 A Daya: 7,5 kW Berat transportasi: 800 kg Jumlah paket transportasi: 3 PERLENGKAPAN Sistem pengumpanan otomatis

Kondisi: bekas, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – The Semi-automatic Under-table Cross-cut Saw ----- Maximum cutting area: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, maximum height: 100 mm. The structure is made entirely of thick-walled, fully reinforced and painted steel. Solid floor mounting system with flanged steel feet for the fixing hole. Two-handed safety cutting control in ergonomic position. Saw motor power: 5.5 kW. Gedpfx Ahjv Uq Tljuobk Adjustable cutting speed via a pneumatic regulator. Maximum system for weight balance and durability. Shock-absorbing system. Independent pneumatic adjustment options for adaptation to various processing types. Durable and easily replaceable saw blade adjustment bar. Carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece hold-down with electro-pneumatic control. Press movement system via innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. CE models must, as standard, be equipped with at least 1 meter long feed tables/roller conveyors at both the infeed and outfeed sides. Technical Data: ----- Maximum saw cross-section, mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotational speed: 2800 rpm Air consumption per cycle: 5 Nl Suction connections: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400V/50 Hz, 3-phase Working table height: 900 mm ± 20 mm Colour: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. The spaces between rollers are enclosed with painted steel. Including side guide. 2 m roller conveyor (left of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. The spaces between rollers are enclosed with painted steel. Including side guide, stop guide and millimeter scale. 2 heavy-duty pneumatic stops, width 200 mm ----- Total price ex-works: on request! ----- Image and video not original, show an identical model. Further options such as longer infeed/outfeed, stop systems available on request! (Technical data according to manufacturer, subject to change!)

Kondisi: bekas, Tahun pembuatan: 2016, tinggi total: 1.600 mm, panjang total: 14.100 mm, lebar total: 1.600 mm, translate-001 Gbsdpswnh N Nsfx Ahusk

Kondisi: bekas, Tahun pembuatan: 2005, tinggi total: 1.750 mm, panjang total: 1.350 mm, lebar total: 1.350 mm, optimierkappsaege-2024-tr500 Gbedpfewq U Dxsx Ahuek

Tahun pembuatan: 2005, Kondisi: bekas, HIT mechanization for KVH and glulam production for components up to 600 mm width, 300 mm height, and 18 m length consisting of various parts available individually or as a complete package - Layer cross pusher - Various cross conveyors - Workpiece roller conveyors - Heavy-duty roller conveyors - 5 lift tables, each with 2 cross conveyors mounted on traveling carriages - Stacking machine Gbedpfxepiurmo Ahusk - Control cabinets - Roller tracks - Traveling truss crosscut saw with waste disposal system

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 1.234 h, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 7.000 mm, panjang umpan sumbu Y: 600 mm, panjang umpan sumbu Z: 250 mm, kecepatan pemakanan sumbu X: 80 m/menit, panjang total: 8.000 mm, tinggi total: 1.800 mm, berat keseluruhan: 2.000 kg, diameter mata gergaji: 500 mm, diameter cakram: 500 mm, panjang meja: 7.000 mm, Perlengkapan: Port USB, Dijual: mesin optimizer STROMAB MATRIX TR 500 dalam kondisi teknis sangat baik, digunakan di bengkel produksi kecil, terutama untuk pemotongan kayu konstruksi. Digunakan untuk prefabrikasi rumah rangka kayu. Mesin berfungsi penuh, telah diservis secara berkala. Siap digunakan tanpa investasi tambahan. Gedpfx Ahowp Rvhjusbk Penjualan disertai faktur PPN. BISA TEST DI TEMPAT HARGA dapat dinegosiasikan.

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 1377, USED STROMAB TR 500 PNEUMATIC CROSSCUT SAW – CE COMPLIANT - Equipped with TIGERSTOP electronic positioning stop, 4000 mm - Infeed roller table, 4500 mm - Outfeed roller table, 4500 mm Gbodpfxet U Izpo Ahusk - Blade diameter: 500 mm - Maximum cutting capacity: 360 mm (W) x 60 mm (H); 135 mm (H) x 280 mm (W) - Motor: 10 HP - 415 Volt - Serial No.: 1377 - Year: 2007

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), Saw blade diameter: 750 mm, saw blade speed: 2200 rpm, table dimensions: 1500 x 1500 x 900 mm, cutting height at 90°/45°/30°: 295/200/137 mm, motor power: 16 kW, length: 1800 mm, width: 1500 mm, height: 1100 mm, weight: 650 kg. An on-site inspection is possible. Gedpfxeurwy Ao Ahuebk

Kondisi: baru, Tahun pembuatan: 2026, Crosscut saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Worktable inclined at 8° Technical features of the cutting unit: Pneumatic upstroke saw TR500 Motor power: 10 HP (7.5 kW), 400 V/50 Hz TCT blade diameter: 500 mm, F=30 Z=144 S=4.6 Cutting cycle time: 4 seconds Gedpfxohw Ng Io Ahusbk Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed by rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for a bundle weight of up to 80 kg Maximum speed of the push-feed system: 90 m/min Pneumatic lift of the pusher at the end of the cutting cycle and overhead return. Data entry management: 12-inch TOUCH SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Edit and enter cutting cycles (patterns) directly on the controller Transfer of cutting lists created on PC via USB or Ethernet port Working software: Manual entry of bundle length Partial optimization without board length reading Cutting cycle with 3 optimization options (maximum length, sequence, and board sequence) 1000 cutting lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization. Piece length reading via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board sequence, volume, minimal waste, and priority length) "OPTI PLUS" package: full optimization with knot and defect removal (OPTION NOT INSTALLED ON THIS MACHINE) Technical description: "OPTI PLUS" package: for the removal of knots and defects Photocell for reading knots and defects for wood mapping Marking with fluorescent chalks/crayons (Note: Only orderable in combination with ZA250) Pneumatic side clamping device Program for creating lists on PC in XML format

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 0x0x0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully optimizing automatic cross-cut saw TR-500 MATRIX-6000 - Motor drive power: 7.5 kW - Saw blade diameter: 500 x 30 mm, Z=144 - Cutting capacity according to cut diagram - Cutting capacity: 135 x 280 mm - Cutting capacity: 125 x 295 mm - Cutting capacity: 95 x 325 mm - Cutting capacity: 80 x 340 mm - Cutting capacity: 55 x 360 mm - Cutting cycle: 4 seconds - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety guard over cross-cutting unit - CE compliant - Weight: 1000 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x diameter 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Air velocity at center of extraction port: approx. 25–35 m/s Electronically controlled pusher: - Infeed length: 6000 mm Gbjdpfev A Htdjx Ahujk - Pusher speed: 90 m/min - Drive via brushless servo motor - Feed system with precision rack-and-pinion and length measurement via servo motor - Pneumatic lifting of the pusher at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Worktable inclination: 8° - Positioning tolerance: +/- 0.4 mm Control: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly at the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 sequential dimensions - 3 optimization options (maximum length, sequence, and workpiece sequence) - 3 optimization options (volume, minimum waste, and priority) - Standard USB and Ethernet ports - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal solution for processing material with variable lengths, with single or bundle infeed - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimum waste, and priority) - Includes OPTI PLUS function for detecting markings, ensuring full optimization and removal of knots and defects. - Markings with chalk Options: - Pneumatic side clamp: €850.00 - Creation of cutting lists on PC: €360.00 - Outfeed table: €360.00/m

Tahun pembuatan: 2011, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Finger jointing line for cross-sections up to 200 cm² (80/240 mm or 100/200 mm), including the following components: 1. HOWIAL Tilt Destacking System - SH/4t - 1.75x1.75x6.00m - 4t – shortest length 2.50 m, semi-automatic package separation. For tilting the timber stack up to 45°. Electro-motor drive. Max. stack dimensions 1.75 x 1.75 x 6.00 m. Max. stack weight 4 t. Shortest timber length 2.5 m. 2. HOWIAL Lamella Separator VE 1 to crosscut saw. With pneumatically controlled tongues, on which material marked for defects is placed onto the underlying roller conveyor. 3. HOWIAL Grading Roller Conveyor RO-1 Digital wood moisture measuring, control and recording system for automatic acquisition and control of wood moisture using the impulse measuring method based on the electrical resistance principle. 4. Gann DMT-8 Gjdpfxei Ezx De Ahuobk Digital wood moisture measuring, control, and recording system for automatic acquisition and control of wood moisture by impulse measuring based on the electric resistance principle. System installed in a large control cabinet, complete with inkjet printer. 5. HOWIAL Crosscut Saw AS-30 B Pneumatically controlled under-table crosscut saw with 2 automatic feed units, automatic crosscutting. Special photo cell control for detection of fluorescent line marking. Automatic waste detection possible. Saw motor power 7.5 kW Saw blade diameter 700 mm Feed drive approx. 2 x 1.5 kW Air pressure 8 bar Max. feed speed approx. 60 m/min 6. HOWIAL Belt Conveyor for cutoff waste, with profiled belt and guide plates Belt width 350 mm Belt length 2000 mm Belt speed 0.4 m/s 7. HOWIAL Double Roller Conveyor RO-2, 6.00 m long Incl. transverse transport, conveyance to finger jointing system. Powered by round belt, all rollers driven. Cross-transfer chain conveyor. Eject ± moisture right, transport speed adjustable up to 100 m/min. Length approx. 6.00 m Roller width approx. 400 mm Diameter 112 mm 8. Compact Finger Jointing Machine Cook Bolinder The technical data are original from Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Input lengths from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Pressing force 5 - 22 tons Spindle diameter 50 mm Finger joint profile 15/15 Spindle speed approx. 6000 rpm Total electrical connected load approx. 62 kW Machine weight approx. 9 tons Gluing: OEST comb system for PU Modern Telemechanique PLC control. 9. HOWIAL Roller Conveyor with Destacking Powered roller conveyor with automatic ejector and hydraulically driven destacking arms. Technical Data: Height: 920 mm Length: approx. 12,000 mm 10. Safety fence panels including safety switches 11. Finger Joint Testing Machine BSPLT-100 Testing machine for finger joint bend test according to DIN 1052-1/A1 and EN 385. Bearing distances freely adjustable, mounted measurement scale, automatic calculation of support distances in the software. Fully automatic test sequence by mouse click via PC (PC not included). Alternatively, the test process can be operated via front panel keys. Connection to any standard PC or laptop (Win 2000/XP) via supplied RS232 serial cable. Fully automatic data acquisition and protocol generation in MS Excel with graphical representation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. pressing force: < 100 kN Max. support length: 2100 mm Measuring accuracy WITHOUT DISMANTLING

Kondisi: bekas, STROMAB TR 500 – Under-table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw featuring a pneumatic saw blade feed and a blade diameter of 500 mm. This machine is ideally suited for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine number: 3229 ——— Technical Data • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg ——— Condition & Delivery The machine is in excellent technical condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on pallet via freight forwarder possible at short notice ——— Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus 19% VAT, subject to changes and errors. Godpjxiza Uefx Ahuobk