Gergaji pengoptimalan

STROMAB TR 600 Matrix II

Kondisi: baru, Tahun pembuatan: 2024, Crosscut saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Working table inclined by 8° Technical features of the cutting unit: Pneumatic upstroke saw TR500 Motor power 10 HP (7.5 kW), 400V/50Hz TCT blade diameter 500 mm, bore 30 mm, Z=144, S=4.6 Cutting cycle speed: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE FOR LEFT AND RIGHT SIDE Feed via rack-and-pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful feed motor for bundle weight of up to 80 kg Maximum feed system speed 90 m/min Pneumatic pusher lift-up at end of cutting cycle and overhead return Data input management: 12” TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Loading and saving of machine parameters via USB port Editing and direct input of cutting cycles (patterns) at controller Transferring cutting lists created on PC via USB or Ethernet port Operating software: Manual entry of load board length Partial optimization without board length reading Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1,000 cutting lists with 11 dimensions or one list with 10,000 consecutive dimensions "OPTI" package: automatic board length detection and full optimization. Piece length reading via photocell Cutting cycle with 6 optimization criteria (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: total optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: “OPTI PLUS” package: for removal of knots and defects Photocell for reading knots and defects during wood mapping Nsdohw Ng Ispfx Aahsdf Marking with fluorescent chalks/crayons (Note: can only be ordered in combination with ZA250) Pneumatic side clamping device

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 220992, STROMAB TR 500 MATRIX CROSSCUT SAW WITH ELECTRONIC PUSHER – CE STANDARDS – USED - Infeed roller table with 6000mm MATRIX electronic pusher - Outfeed table: 1500mm Ndjdpst U I A Hjfx Aahjf - Motor: 10 HP - Blade diameter: 500mm - Blade speed: 3500 rpm - Maximum cutting capacity: 360 mm (W) x 55 mm (H) – 200 mm (W) x 135 mm (H) - Minimum cutting section: 20 mm (W) x 10 mm (H) - ELCO CNC control - 415 Volt - Serial no. 220992 - Year: 2002

Kondisi: baik (bekas), 0323 Marke: SML - ITALIEN Modell: SILVER P 35/EL - CE-Norm Elektronische Doppelgehrungssäge zum Schneiden von Holz, Rahmen, PVC, Aluminium, Kunststoffen und verschiedenen anderen Materialien – CE-Norm Technische Daten: - Oleo-pneumatisches Niederfahren des Sägekopfes - Maximale Schnittlänge: 5.200 mm - Minimale Schnittlänge: 50 mm - Schnitthöhe: 100 mm - Maximale Schnittbreite: 170 mm - Sägeblattdurchmesser: 350 mm, Aufnahme F30 - Motorleistung: je 3 PS – 3.000 U/min - Elektronischer Kopfpositions-Programmierer - Bimanuelle Steuerung für das Absenken der Sägeblätter - Pneumatische Klemmung des Werkstücks - 2 Absauganschlüsse, Durchmesser 60 mm - Arbeitsdruck: 7 bar - Abmessungen (L x B x H): 6.300 x 1.000 x 1.600 mm Ndsdpetu Hy Ejfx Aahjf - Gewicht: 1.100 kg

Kondisi: baik (bekas), Fonte en plaques (marbres de fonte) Longueur : 3970 mm Largeur : 2060 mm Surface utile (L x l x h) : 3910 x 2000 x 350 mm Livrée avec 6 pieds de mise à niveau Ndedpfx Aash Awqgshsf Poids : 7 T 2 plaques identiques disponibles.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Power: 1.5 kW Saw blade speed: 2800 rpm Saw blade diameter: 250 mm Saw blade bore: 30 mm Cutting length: 400 mm (at 20 mm workpiece thickness) Cutting length at 45°: 230 mm Cutting depth: 65 mm Arm swivel lock: +/- 45° Weight: 140 kg Nedjulzchjpfx Aahjdf Motor protection switch Brake motor Emergency stop switch CE certified Including dust collection hood for extraction connection, diameter 120 mm Note on used machines: • Technical specifications are subject to errors and prior sale. • Prices quoted are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at our premises. • Special agreements are only valid in written form. (We only respond to inquiries with your address and telephone number!)

Tahun pembuatan: 2018, Kondisi: seperti baru (mesin pameran), Cross-cut saw AS-600 Demonstration machine Incl. saw blade diameter 600 mm. Incl. automatic minimum quantity lubrication system. Incl. smooth feed table and manual length stop. The machine can be viewed on site by appointment. Ndodpfjd A T Efsx Aahjf

Kondisi: baru, Tahun pembuatan: 2024, Mitre Saw, Optimizer STOMANA S500 Infeed Table: 2000 mm Discharge Table: 2000 mm Pneumatic Stops: 2 pcs Blade Diameter: ø500 mm Blade Thickness: 4.2 mm Spindle Diameter: ø35 mm Nsdpfx Aaelk Dy Hjhjdf Spindle Speed: 2800 rpm Upper Extraction Port Diameter: ø100 mm Lower Extraction Port Diameter: ø120 mm Motor Power: 5.5 kW Compressed Air Pressure: 6.0 – 8.0 bar Overall Dimensions (L x W x H): 4530 x 900 x 1300 mm Working Table Height: 900 mm Weight: approx. 200 kg

Kondisi: bekas, Saw blade diameter 500 mm Cutting height 120 mm Motor power 5.5/7.5 kW Working length 4100 mm Salvapush 2000 Optimizing Crosscut Saw for complete wood optimization and defect cutting Version 4100 (working length) ----- Technical Features: - Cutting range: minimum 30x12 mm, maximum 270x120/300x95 mm. Special cutting ranges available on request. - Length of boards before cutting: minimum 500 mm, maximum 4100/5100/6100 mm, depending on version - Possibility of a single cut on the last 40 mm of the board. Minimum length of the final wood waste: 5 mm. - Maximum wood weight 120 kg (special solutions available on request) - Feed with pusher, directly controlled by an innovative computer-controlled and servo-driven system, digitally connected via EtherCAT. - Special worktable inclined at 25 degrees to facilitate loading and to keep the workpiece clamped - Double steel frame, highly robust, reinforced and painted. - Special locking guard at the rear for appropriate operator safety. Pusher speed up to 60 m/min in accordance with current safety regulations: Movement speed of the carriage directly adjustable by computer depending on the cutting area. Faster versions available as an option. - Very robust pusher carriage: extended dimensions approx. 300x345x25 mm. - The aluminium support beam is large and robust: height 135 mm, width 120 mm. - Special transmission system with a 50 mm wide toothed belt with 33 hardened steel bands inside, for high precision and performance - Electronic brushless servo motor with constant torque and digital EtherCAT connection - Laser photo cell for wood detection and luminescence reader for fluorescent markings. System is fixed in position; no manual adjustment required for changes in wood thickness. - Electronic operating system S-OPTIM - Complete management of up to 5 cutting qualities - Robust outfeed table for collecting cut pieces, made of hardened steel, length 3000 mm. Inclined at 25 degrees, like the rest of the line, and fully equipped with guide. ----- Price for above machine on request! ----- Options at extra cost: - Extended collecting table (outfeed) - Gravity pre-loading system - Zebra label printer - Upgrade saw motor from 5.5 kW to 7.5 kW - Increase cutting range to 140x240 – 100x300 with 550 mm diameter circular saw blade - Horizontal side ejection Nedpjwhf Ipjfx Aahodf - Wide pusher plate Optional alternatives for collecting table (outfeed): - Version TT Rotary Table: outfeed table with rotation for discharging the entire cut stack in a single cycle - Floor hatch for rotating outfeed table, for disposing of end pieces of sawn wood - Version LS Electronic Sorting Device: Sorting of cut pieces by size and quality with 3 high-speed ejectors ----- Prices for the above options on request! ----- (Technical data as per manufacturer – subject to change!)

Kondisi: siap digunakan (bekas), Technische Merkmale Ndodpferadt Dox Aahsf Max. Sägeblatt-Ø: 450 mm, Bohrung: 30 mm Motorleistung: 4 kW Drehzahl: 2800 U/min Schnittkapazität (Höhe x Breite des Holzes): 25 x 330 mm, 50 x 300 mm, 100 x 250 mm Einlauftisch: Ablauftisch: Tigerstop-Anschlag im Lieferumfang enthalten 2 Absaugstutzen Ø 100 mm Ideal geeignet für: Zuschnitt von Holzziegeln, Verpackungen, Paletten, Sparren, Schnittholz Stromversorgung und Motoren Spannung: 380 V Anschluss: Dreiphasig Leistung: 5,5 kW Motor: 7,5 PS Abmessungen Länge: 2100 mm Breite: 1010 mm Höhe: 1210 mm Gewicht: 310 kg

Kondisi: bekas, HM-ZN8500_de Nsdpfjwnhz Sox Aahsdf