Kotak susun

Stucki 8000 Kunststoffkiste Stucki flach

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. Fsdpsfxyhfsfx Aagefw In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1983, Pressing force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 – 120 mm Shut height: 450 mm (at maximum stroke, slide up) Ram reinforcement: 100 mm Ffsdpfx Aasgpxc Segew Table size: 850 x 810 mm Passage opening: 00 x 0 mm Ram area: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guide - Hydraulic overload protection - Motor-driven oil circulation lubrication - Motor-driven slide adjustment - Manual stroke adjustment - Pneumatic counterbalance cylinder for ram weight compensation - Vibration-damping machine feet

Kondisi: baru, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height range: 95–240 mm Table size: 160 x 110 mm Spindle diameter: 25 mm Machine weight approx.: 27 kg Dimensions (L x W x H): 160 x 230 mm Direct Acting Pneumatic Presses These presses deliver full pressing force over the entire stroke length. They are primarily used when long-stroke parts require processing with constant force. Outstanding Features: • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinders with end-position cushioning on both sides • Double guide rings in the piston ensure smooth and consistent operation • Oil-resistant sealing elements Special Features of the PND Series: • Spindle secured against rotation Ffodefv Awaepfx Aagjw • On the PND 85/S, spindle return is carried out via only one cylinder chamber—resulting in additional air savings • Fine adjustment of working height is easy, fast, and precise in two stages: – Basic setting by simply loosening the clamping screws on the stand – Precision fine-tuning via the stroke limitation ring on the piston rod Additional Advantage: Faster cycle times and air savings

Kondisi: bekas, Tahun pembuatan: 2007, Press force 100 t Stroke 500 mm Table dimensions 900 x 600 mm Rapid traverse 22 mm/s Stroke speed 2 mm/s Ram surface 700 x 350 mm Total power requirement 2.2 kW Machine weight approx. 1.6 t Ffjdpfevprv Rjx Aagsw Space requirement approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press The machine is an Italian brand, SICMI, distributed by Knuth.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Pressure: 25 t Outreach: 160 mm Installation height: 500 mm Table dimensions: 650 x 650 mm Ram diameter: 140 mm (round) Fjdpfxsfcw Apo Aagofw Stroke: 130 mm Power requirement: 4 kW Weight: 2,000 kg Height: 2,100 mm Width: 1,100 mm Depth: 1,500 mm

Kondisi: baru, Pressure 25 t Throat depth 200 mm Stroke 4 - 80 mm Table size 520 x 400 mm Strokes 160 strokes/min Continuous working capacity 1370 Nm Single-stroke working capacity 2740 Nm Stroke adjustment 4 - 80 mm Ram adjustment 40 mm Ram surface 160 x 160 mm Table pass-through opening 200 x 150 mm Clamping plate 500 x 380 x 60 mm Table pass-through opening 80 mm Machine weight approx. 1.9 t Ffsdpob U Hwnjfx Aagjw - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Table height adjustable - Control cabinet with touchscreen - Foot switch

Kondisi: bekas, Tahun pembuatan: 1997, druck-40-t Fedpjvuuckofx Aagofw

Kondisi: baik (bekas), Tahun pembuatan: 2006, nomor mesin/kendaraan: 860027, 24331 Technical Specifications: - Table surface: 1700 x 550 mm - Manual travel distances X / Y: 1300 x 500 mm - Drill press manufacturer: MAXION, Model: BT 18 STP - Drilling capacity up to: 18 mm - Tapping capacity up to: M 16 - Drill spindle mount: MK 2 (Morse taper 2) Fedpfx Aasu Aq Amjgjfw - Drill spindle stroke with fine depth adjustment: 76 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - Spindle speeds: 100 - 1800 rpm 200 - 3600 rpm - Motorized stroke for the drilling unit - Motorized table clamping x + y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Power connection: 400 V - Required space (approx.): W 1750 x H 1600 x D 1000 mm - Weight (approx.): 1200 kg

Kondisi: sangat baik (bekas), Double-head projection welding machine DALEX PMS 14-4 Nominal throat depth: 350 mm Rated power at 50% duty cycle: 160 kVA Secondary short-circuit current: 79.4 kA Secondary open-circuit voltage: 5.8 - 9.74 V Electrode force: 120-720 daN Equipped with 2 double-stroke cylinders with approach stroke Ffodpfx Aed Ip Aljagsw Mounted control cabinet according to VDE 0100 Main switch 4-step switch Synchronous welding control with monitoring function MPS 8043 Q1 Current measuring belt Cylinders can be operated in cascade or simultaneous mode Weight: 1090 kg Machine is currently being refurbished

Kondisi: bekas, Tahun pembuatan: 1996, Pressing force: 80 t Throat depth: 320 mm Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table size: 830 x 610 mm Ram surface: 650 x 400 mm Frame opening (rearward): 630 mm Total power requirement: kW Machine weight approx. 8.1 t Ffjdjtycdkjpfx Aagew Space requirements approx. W 1.2 x D 1.9 x H 3.3 m Equipment: - With gear drive - Fixed table - Automatic stroke adjustment - Automatic ram adjustment - Hydraulic overload protection - Ejector - Central grease lubrication - Cover plate for drop-through hole - Infinitely variable speed control via frequency converter - The machine will be technically inspected and overhauled in-house, and will receive a new control cabinet with safety controls and touchscreen - Current accident prevention inspection (UVV) including brake time measurement