Mesin penggiling silinder

Studer S40 CNC 1000/1600

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 31 h, 3D coordinate CNC measuring machine Profitech Innometrik Advanced, gantry design (demo unit at special price) Open Cable Key features of the gantry design: - Gantry construction with low center of gravity, wide bearing separation, and optimal stiffness-to-mass ratio. - Granite guideways provide consistent thermal, dimensional, torsional, and geometric stability for the machine. - 24 air bearings ensure smooth movement of all three axes. - High dynamics for improved performance: the machine achieves acceleration rates comparable to medium and large CMMs. - Thermally stable materials and components minimize the impact of ambient temperature fluctuations on measurement results. Includes air filter and regulator. - Pneumatic counterbalance system for the Z-axis. - Granite table with M10 threaded inserts. - Passive vibration isolation pads. Technical data: Measuring paths: X: 500 mm / Y: 600 mm / Z: 400 mm Max. workpiece weight: 250 kg Machine weight: 850 kg Overall dimensions: 1290 x 1160 x 2350 mm Bljdpjdyah Sofx Af Soc Accuracy according to DIN EN ISO 10360-2 and ISO 10360-4: - Volumetric probing deviation: MPEP = 2.2 µm - Volumetric length measurement deviation: MPEE = 2.2 + L / 350 (µm) Environmental conditions: Standard room temperature: 18–22°C Operating temperature: 10–35°C Compressed air supply: Minimum air pressure: 6 bar Air consumption: 90 NI/min Can also be configured as a complete package with probe system, software, commissioning, and training. (Annual maintenance and calibration also available on request.)

Tahun pembuatan: 1990, Kondisi: baik (bekas), CNC 4th axis Make: NIKKEN Type: CNC-200, Year: 1990 Bedpfx Afegabu Us Solc with tailstock and base plate.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.500 mm, jarak lintasan sumbu Y: 1.100 mm, jarak gerak sumbu Z: 1.500 mm, gerak cepat sumbu X: 40 m/menit, pergeseran cepat sumbu Y: 40 m/menit, pergerakan cepat sumbu Z: 40 m/menit, kecepatan rotasi (maks.): 7.000 rpm, daya motor spindle: 34 W, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Frais mesin bekas dengan kolom bergerak, dilengkapi CNC H. TNC-530. Blsdpfx Aexyw Tfef Ssc

Tahun pembuatan: 2021, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3815407, WEIGHT 8000 KG Bledpjt Nhqyefx Af Sjc FEM ISO 1Am M4 POWER 2.4/15.5 kW (50 Hz) MAXIMUM CAPACITY 16 TON

Kondisi: bekas, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Internal spindle taper MK 4 Bedpfx Aju Uu S Tjf Sjlc Table diameter 160 mm Table bore diameter 75 mm Strokes per minute 355 – 630 spm Feed range 0.008 – 0.4 mm/stroke Space requirement approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg Year of manufacture: approx. 1970 Hydraulic clamping on the table Change gears

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0–115 rpm, grinding wheel peripheral speed 45 m/sec, grinding diameter 2–150 mm, grinding wheel drive 45 kW, machine weight 6.5 t, space requirement approx. 3.0x1.5 m Bodpfeuy Ifgsx Af Selc The machine will be equipped with a new Siemens S7 control system including a new operator panel before sale. The dressing spindle for the grinding wheel is electrically operated via a servomotor. The machine will be completely overhauled, with defective parts repaired or replaced. Various options available (coolant system, infeed/outfeed systems, workpiece rulers, etc.).

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang total: 620 mm, mechanics-all wear parts of the machine are replaced, including the X-axis adjustment spindle. All assemblies are brought to a like-new condition. After the overhaul, the machine is comparable to a new one. geometry-the machine is completely disassembled down to the guideways. Before restoring the geometry of the individual tables and assemblies, both X- and Z-axis guideways are hand-scraped and restored to an as-new condition. Upon completion, the machine receives a measurement protocol according to manufacturer specifications. painting-after the geometry restoration, the machine is prepared for repainting. All housings, tables, and the machine bed are stripped of old paint, cleaned, and repainted. hydraulics-the entire lubrication system, including lubrication unit, is replaced. The hydraulic unit is also completely overhauled. conventional internal cylindrical grinding machine TSCHUDIN HTG 610I equipment of the machine: technical data: center height: 150 mm distance between centers: 680 mm grinding length: 620 mm machine weight and required space: 2,500 kg // 2,340 x 1,445 x 1,900 mm equipment of the machine (standard): 1 pc. workpiece spindle head MK5 1 pc. control panel 1 pc. mount for internal grinding spindle 1 pc. speed control device for belt spindle (UJ50 / UJ80) FISCHER 1 pc. hydraulic unit Blodpfx Ajurw Uysf Sec optional: • digital 2-axis measuring system • freely adjustable speed (1–800 rpm) including soft start (higher speeds optional upon clarification of technical details) • separate low-speed setting for part alignment

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, kecepatan spindel (maks.): 6.000 rpm, lebar meja: 1.100 mm, panjang meja: 3.500 mm, tinggi total: 4.164 mm, lebar total: 5.875 mm, panjang total: 9.120 mm, kecepatan rotasi (maks.): 6.000 rpm, berat benda kerja (maks.): 8.000 kg, berat keseluruhan: 29.000 kg, torsi: 760 Nm, ACCESSORIES Cooling System: Yes Through Spindle Coolant: Yes Portable Handwheel: Yes Workpiece Measuring Probe / Heidenhain Tool Probe: Yes Preparation for Renishaw Touch Probe: Yes Full Enclosure: Yes Bsdeulwy Aopfx Af Selc Chip Conveyor (2 Augers + 1 Side Hinged): Yes Automatic Tool Changer (ATC): Yes (24 tools)

Kondisi: bekas, EZSET EZ400 tool presetting device Bodpsuhb Stefx Af Selc

Kondisi: bekas, Tahun pembuatan: 1969, en-001 Bledpfx Afst Hwzis Soc