Mesin cetak injeksi

Sumitomi (SHI) Demag Ergotech 50/355-200

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, 5ca09cfe Chodpfx Abjyv H Igovsc

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping platen size (H x V): 1,168 x 1,144 mm Clear tie-bar spacing (W x H): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke is programmable Installed barrel heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Type: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console mounted on fixed platen Gripper function R1 (C-) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle area protection; • High-speed, position-controlled screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection moulding machine comes fully equipped!! Cedsy Hmfyspfx Abvshc Condition: As-new condition, only 5,290 operating hours.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, used-injection-moulding-machine-dr-boy-22d Cedpfozaqzdsx Abvshc

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036936, gaya penjepit: 800 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 1.837 batang, berat injeksi: 123 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.820 mm, berat keseluruhan: 5.900 kg, kapasitas pemanasan: 8,9 kW (12,10 hp), jenis penggerak: Vollelektrisch, bentang bebas: 470 mm, berat alat: 600.000 g, Plastics injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The precisionMolding base injection moulding machine provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine can be utilised in a wide range of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimised cost-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Fast lead times thanks to the base machine concept with a wide range of options TECHNICAL DATA: Chjdjuggb Dspfx Abvsc KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, YOM 2023) CONTROL SYSTEM  MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Platen size (h x v) mm 610 x 560  Mould installation height min.-max. mm 150 - 400  Max. opening stroke mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Shot volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow cm³/s 192  Screw drive / speed rpm 382  Plasticizing rate (standard screw) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating power kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticizing system  BluePower full insulation for plasticizing cylinder  Open nozzle  1-fold air valve (BWAP)  1-fold pneumatic control for hot runner shut-off  4-fold electric interface for cascade control  Electrical pre-installation for hydraulic auxiliary unit  Euromap interface for handling E18, E63  Euromap interface (host computer) E67, E77  4-fold water manifold  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression moulding switch  Graphic analysis package  Swing-out injection unit The machine is located at our plant in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.

Tahun pembuatan: 2000, Kondisi: bekas, Punching machine Edel Codsg Dgyxspfx Abvohc HM 35/350 BKE 200/5 Maximum pressure: 35 t Sheet thickness: 5 mm at 40 kp/mm²

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, spritzg16 Codpfx Aezardgobvohc

Kondisi: baik (bekas), Double decoiler, decoiler, uncoiler, motorized decoiler for sheet metal processing, punching machine, eccentric press, hydraulic press, automatic punching machine, motorized decoiler, coiler, uncoiler, sheet metal uncoiler Chjdpfohfavujx Abvoc -Manufacturer: OBRU, height-adjustable decoiler with drive -Diameter/width: adjustable, see photos -Dimensions: 750/730/H1130 mm -Weight: 114 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Gaya penjepitan (kN): 1600 Jarak pembukaan (mm): 460 Tinggi cetakan (min–maks) (mm): 250 – 600 Ukuran meja (mm): 760 × 760 Jarak antara kolom (mm): 520 × 520 Stroke/power penyorong (mm / kN): 150 / 40 Cedpfxeyyz Dds Abvshc Waktu siklus kering (detik): 1,4 – 320 Diameter sekrup (mm): 30 Stroke sekrup (mm): 160 Volume injeksi (cm³): 113 Kecepatan putaran sekrup (rpm): 420 Rasio L/D (3 zona): 23,6 / 20,0 Kapasitas plastifikasi (g/s): 15 / 22 Rasio L/D (silinder): -29 Kapasitas pemrosesan (silinder) (g/s): -29 Volume tembakan (cm³/s): 157 / 214 Tekanan injeksi (bar): 2400 / 2000 Stroke/power nozzle (mm / kN): 225 / 28 Daya penggerak / output Daya motor pompa (kW): 16,91 Jam operasi: 13.227 jam Tipe: Multikomponen Penggerak: Elektrik

Tahun pembuatan: 2019, jam operasional: 18.138 h, Kondisi: siap digunakan (bekas), berat keseluruhan: 25.340 kg, SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 ini diproduksi pada tahun 2019. Mesin injeksi listrik yang kokoh ini memiliki diameter ulir 50 mm, gaya penutupan 3.500 kN, dan jarak antara tiang 820 mm. Mesin ini telah mencatat 18.138 jam operasi dengan 12.875.090 siklus. Jika Anda mencari mesin injeksi berkualitas tinggi, pertimbangkan SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 yang kami tawarkan untuk dijual. Informasi tambahan: • Diameter ulir: 50 mm • Volume dosis maksimum: 530 cc • Jumlah siklus: 12.875.090 Codpfx Asx D Nxzobvshc • Jarak antara tiang: 820 mm • Gaya penutupan: 3.500 kN

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 700 kN, Perlengkapan: dokumentasi / manual, Seologica-Steuerung Cjdpfx Aoygtqusbvohc