Mesin cetak injeksi

Sumitomo Demag Systec 100/420-310

Kondisi: baik (bekas), Tahun pembuatan: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV – Injection unit regulation. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticising unit Complete plasticising system for thermoplastics with a 135 mm screw diameter, non-return valve, and open nozzle Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8,500 kN - Mold opening force: 560 kN - Platen dimensions (H x V): 1600 x 1600 mm - Tie bar spacing (H x V): 1140 x 1140 mm - Mold opening stroke: 1,600 mm - Mold height (min - max): 500 – 1,100 mm - Daylight opening: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Chodpfx Aotrya Roagea Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Shot weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Pump motor rated power: 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Tahun pembuatan: 1981, Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Previous application: Production of TPE films up to 6 mm thick. Many other polymers are possible. The system is still operational and can be inspected at any time in Nuremberg. The system consists of: Single-screw extruder Kuhne K45-24D Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Chedpfx Aaou Ttf Njgea Flat die: Films up to max. 330 mm width Calender Roller width (gross): 1200 mm Roller width (net): 1100 mm (max. film width) Take-off unit and flying knife cutter

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), Rotor diameter: 450 mm, cutting chamber opening (X/Y): 900 mm / 540 mm, rotor knives: 3 x 32, stator knives: stationary, drive power: 37 kW, throughput capacity: 900 kg/h, machine dimensions (X/Y/Z): approx. 1600 mm / 1700 mm / 1500 mm. Documentation available. Chjdpfx Aeucw S Sjagsa

Kondisi: bekas, Tahun pembuatan 2003 2,2 kW 3,0 HP Cedpfxjw Upn Es Aageha termasuk dokumentasi, COC

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Stock No. 13602 Manufacturer: Krauss Maffei Machine type: KM 650 – 8000 CM Year of manufacture: 1997 Operating hours: 80,000 h Control system: MC 3-F Screen language: German Location: D-52249 Eschweiler Clamping unit: Clamping force: 6,500 kN Maximum mold opening force: 346 kN Platen opening force (moving platen): 169 kN Platen closing force (moving platen): 144 kN Clamping plate size (H x V): 1,704 x 1,700 mm Clearance between tie-bars (H x V): 930 x 930 mm Mold opening stroke: 1,150 mm Cjdpeub S R Hofx Aagsha Minimum mold installation height: 600 mm Daylight opening: 1,750 mm Ejector stroke: 250 mm Ejector force forward/back: 226 kN Injection unit: Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Shot volume: 6,172 ccm Shot weight (PS): 5,617 g Plasticizing rate: 1,540 ccm/s Screw speed: 138 rpm Plasticizing output: 238 g/s Nozzle contact force: 246 kN Electrohydraulic equipment: Nominal pump motor power: 132 kW Installed heating power: 70 kW Number of heating zones (barrel): 7 Dimensions and weights: Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - 2 x hydraulic core pulls on fixed platen - 2 x hydraulic core pulls on moving platen - 8 x hot runner control zones - Robot interface according to Euromap 67

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 3.500 kg, jenis arus masuk: tiga fasa, berat kosong: 3.500 kg, lebar kerja: 1.400 mm, panjang bukaan pengisian: 1.400 mm, lebar bukaan pengisian: 700 mm, Mesin penghancur Untha 40 Daya 2 x 18,5 kW Lemari listrik - Siemens Dimensi ruang penghancur 1400x700 mm. Corong pengisian. Berat sekitar 3500 kg Cedpfx Aezmzgpsagjha Mesin dalam kondisi berfungsi penuh. Harga berdasarkan permintaan. Lebih banyak foto dan video saat mesin beroperasi dapat diberikan sesuai permintaan. Pengujian dapat dilakukan. Informasi lebih lanjut akan diberikan melalui telepon.

Kondisi: bekas, Tahun pembuatan: 2001, jam operasional: 58.764 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 502748, gaya penjepit: 1.000 kN, diameter sekrup: 30 mm, jarak antara tiang: 420 mm, volume langkah: 144 cm³, tekanan injeksi: 1,905 batang, gaya ejektor: 41 N, lintasan ejektor: 150 mm, langkah pembukaan: 500 mm, panjang pelat: 590 mm, lebar pelat: 590 mm, tinggi pemasangan: 250 mm, panjang total: 4.550 mm, lebar total: 1.450 mm, tinggi total: 2.000 mm, berat keseluruhan: 4.800 kg, kapasitas pemanasan: 9 kW (12,24 hp), daya pompa: 30.000 W, jenis penyesuaian ketinggian: hidrolik, panjang langkah: 150 mm, tinggi alat: 250 mm, berat alat: 700.000 g, Perlengkapan: dokumentasi / manual, Demag ERGOtech injection molding machine ERGOtech 100-420-200 NC4, year of manufacture 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral equipment The injection molding machine is in good condition and ready for operation. For sale is the injection molding machine ERGOtech 100-420-200 NC4. Optionally, all associated Wittmann peripheral devices can be included at an additional cost. Chsdpotltvzefx Aagoa We acquired the Demag ERGOtech as part of our facility expansion in 2020 for a customer order and equipped it with the relevant Wittmann peripherals. The machine was serviced on site by a DEMAG service technician and is free from defects. OPTIONALLY, all associated Wittmann peripheral equipment can be sold: Wittmann Battenfeld Peripheral Equipment (Germany): • Wittmann Tempro Plus D160 – Dual circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMO DEVICE – used, no defects Equipped with: – 2 pcs. reinforced pump TemproPlus D160-1.0kW (2.4A) 60l – 1 pc. flow measurement – ultrasonic 140–180°C – 1 pc. digital interface 20mA – 1 pc. packaging for temperature control unit Original price: €6,980.00 Sale: €3,490.00 • Wittmann compact chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMO DEVICE – used, no defects Original price: €4,750.00 Sale: €2,375.00 • Wittmann Battenfeld Germany Drying and dosing accessories – 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granulate – 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granulates, hinged lid with integrated collector motor – 1 pc. HOPPER: MT203 machine hopper 203 for setting up a separator from the 200 series – 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulates Condition – NEW – Unused Original price: €8,467.00 Sale: €4,233.50 All prices are exclusive of the legal VAT of 19%. ATTENTION: The offer does not include relocation or transportation costs for the machine. These can be additionally offered and organized as a service upon request. For further questions, please feel free to contact me personally at any time.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 2.000 kg, panjang rotor: 870 mm, daya: 30 kW (40,79 hp), Single-shaft shredder in excellent condition – versatile application This high-performance machine is in very good condition and is ideally suited for processing a wide range of waste materials, including: Various plastics Paper and cardboard Chsdpowy Ninsfx Aagja Wood waste Electric cables

Kondisi: baik (bekas), Tahun pembuatan: 2004, VC330-80 plus Leto: 2004 Zatezna sila: 800 kN Vbrizgalna enota: 330 Krmilna enota: CC200 A01 Polž premera 40 mm Delovne ure: 91.112 1x izvlek jedra 4x digitalni vhod, 4x digitalni izhod Chodpjvdqbhofx Aagsa 1x enofazna vtičnica 1x trifazna vtičnica Nova črpalka

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Chodoy Hmfyspfx Aagsa Maximum mold installation height: 900 mm (extended) Clamping platen size (H x V): 1,168 x 1,144 mm Clear tie-bar spacing (W x H): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke is programmable Installed barrel heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Type: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console mounted on fixed platen Gripper function R1 (C-) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle area protection; • High-speed, position-controlled screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection moulding machine comes fully equipped!! Condition: As-new condition, only 5,290 operating hours.