SUMITOMO SHI DEMAG El-Exis S 250/630-1450

SUMITOMO SHI DEMAG El-Exis S 250/630-1450

Kondisi: bekas, Grundfos CR 60 20 A-F-A-BBUE Model B500002P39447 Nodpfx Ameuif Iuj Aowf 16 bar max. 110 degrees Celsius 60 m³/hour 20.2 m head n 2900 rpm This offer is directed exclusively at commercial customers as defined by §14 of the German Civil Code (BGB). No sale to private individuals.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang total: 2.750 mm, lebar total: 2.800 mm, tinggi total: 1.830 mm, persyaratan ruang panjang: 2.800 mm, lebar yang dibutuhkan: 2.850 mm, kebutuhan tinggi: 1.900 mm, produsen motor: Bitzer, laju aliran volumetrik: 940 m³/jam, EN: Two used Bitzer screw compressor skids for low-temperature Freon applications. Both skids are supplied with a shared control panel. Originally, each skid was intended for a separate cold store, but the capacities listed in the specifications are combined. Skid 1 is fitted with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW DE: Zwei gebrauchte Bitzer-Schraubenverdichterskids für Niedertemperaturanwendungen mit Freon. Beide Skids werden mit einem gemeinsamen Schaltschrank geliefert. Ursprünglich war jeder Skid für einen eigenen Tiefkühlraum vorgesehen, die in den technischen Daten angegebenen Leistungen sind jedoch zusammengerechnet. Skid 1 ist ausgestattet mit zwei Bitzer HSN 7461-70-40P halbhermetischen Schraubenverdichtern, einem Bitzer FS 3102 Flüssigkeitsabscheider, einem Bitzer OA4088 Ölabscheider, einem gelöteten Wärmetauscher als Economizer, einem gelöteten Wärmetauscher zur Wärmerückgewinnung sowie Druck- und Sicherheitsschaltern. Dieser Skid hat ein Fördervolumen von 440 m³/h bei 50 Hz und 532 m³/h bei 60 Hz. Skid 2 wird mit zwei Bitzer HSN 7471-75 halbhermetischen Schraubenverdichtern, einem Bitzer FS 3102 Flüssigkeitsabscheider, einem Bitzer OA4088 Ölabscheider, einem gelöteten Wärmetauscher als Economizer, einem WTT GmbH WP 7M-44 gelöteten Wärmetauscher zur Wärmerückgewinnung sowie Druck- und Sicherheitsschaltern geliefert. Dieser Skid hat ein Fördervolumen von 500 m³/h bei 50 Hz und 600 m³/h bei 60 Hz. Bitzer HSN 7461-70-40P (x2) Leistungen: -20ºC/+40ºC: 229,6 kW -30ºC/+40ºC: 157,4 kW Nedpfx Amjx Ap Hps Aswf -40ºC/+40ºC: 102,0 kW -45ºC/+40ºC: 79,8 kW Bitzer HSN 7471-75 (x2) Leistungen: -20ºC/+40ºC: 240,6 kW -30ºC/+40ºC: 165,8 kW -40ºC/+40ºC: 109,0 kW -45ºC/+40ºC: 86,0 kW

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Granulator eksentrik EGR digunakan dalam produksi plastik yang sensitif terhadap suhu dan geseran. Mesin ini dirancang khusus untuk granulasi PVC lunak, PVC keras, formula HFFR, atau compound berbasis elastomer untuk kabel tegangan rendah, sedang, dan tinggi. Selain itu, mesin juga dapat digunakan sebagai ekstruder sekrup tunggal konvensional untuk berbagai tujuan pemrosesan. • Diameter sekrup: 200 mm Nwsdpjw Iu T Tsfx Am Ajf • dengan zona penguapan • Daya penggerak: 72,5 kW

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), Clamping force: 600 kN, Weight: 9 t, Operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Nwsdpfx Ash Nypfem Aof

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 6.842 km, daya: 134 kW (182,19 hp), jenis bahan bakar: diesel, Tahun pembuatan: 2001, nomor mesin/kendaraan: 3507TB, Perlengkapan: penggerak semua roda, CATERPILLAR 950G dalam kondisi baik, sepenuhnya berfungsi, asuransi masih berlaku, uji kelayakan telah lulus. Nwsdpfxexy Hkge Am Aof

Kondisi: baru, As well as other types, as a package. Nwjdof Ddzqepfx Am Asf

Kondisi: baru, Tahun pembuatan: 2023, jam operasional: 50 h, nl-hu-001 Njdpfx Asx Aphtom Aswf

Kondisi: bekas, Vertical Multistage High-Pressure Centrifugal Pump GRUNDFOS As-new pump, but part of the magnetic coupling has been removed. Type: CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Performance at 7.2 bar: max. 10 m³/h Head: max. 91.8 meters Power supply: 400 Volt, 50 Hz Power: 3 kW - 9-stage pump construction - Made of stainless steel 1.4401 - The pump is as new and was used as a parts donor, but includes several new pump chambers - Part of the magnetic coupling is missing Suitable for drinking water supply, irrigation, and drainage Packed in original wooden crate Pump dimensions (LxWxH): 1100 x 250 x 300 mm Shipping crate dimensions (LxWxH): 1400 x 330 x 340 mm Weight with shipping crate: 85 kg As new condition Not a submersible or immersion pump. Nwsdpsfupadjfx Am Aef

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, jam operasional: 16.000 h, Fungsionalitas: berfungsi sepenuhnya, 1 unit used two-component injection molding machine Manufacturer: ARBURG Model: 720A3200-800/70 Year of manufacture: 2017 Clamping force: 320 tons Tie bar spacing: 720 x 720 mm Minimum/maximum mold height: 300 - 800 mm Opening stroke: 600 mm Screw diameter 1: 50 mm Max. shot volume: 392 cm³ Injection weight in PS: 359 g Screw diameter 2: 22 mm Max. shot volume: 34 cm³ Injection weight in PS: 31 g Control system: Selogica Nwedpev S E Dgofx Am Ajf Please request technical specifications.

Kondisi: bekas, Tahun pembuatan: 2006, Numerical control XP 600 Working area X-axis: 3,060 mm Working area Y-axis: 1,140 mm Working area Z-axis: 160 mm Number of work zones: 2 Bar worktable 6 adjustable bars for suction cup support Number of pneumatic Bakelite bars for panel lifting: (?) 2 adjustable suction cups per bar with vacuum seal for securing the panel during machining 1 vertical electrospindle with C-axis, 12 kW motor Tool change system with 10 positions – located on the machine drill head, cone type ISO 30 Drill head BH19L with 18 spindles, arranged as follows: - 7 vertical spindles on the X-axis - 6 vertical spindles on the Y-axis - 4 horizontal spindles on the X-axis - 2 horizontal spindles on the Y-axis - 1 independent saw blade unit for grooving in the X-axis Njdpfx Aov Aacfsm Aswf Front photocell guard and safety system Automatic lubrication system (?) Air conditioning system for cooling and cleaning the machine control panel Vacuum pump: 250 m³/h TECHNICAL DATA TO BE VERIFIED