Robot 3 sumbu

System 3R Transformer Workmaster

Tahun pembuatan: 2014, Kondisi: sangat baik (bekas), DMG PH 150-8. Tahun pembuatan 2014. Dilengkapi dengan palet. Podpfjin Dkljx An Isra Layar sentuh. Mesin dalam kondisi sangat baik.

Kondisi: baik (bekas), Tahun pembuatan: 2013, Ref.-No.: 10636 Manufacturer: TOS VARNSDORF Model: WHN 13 CNC Prsdpfx Anjzc D E Is Ioa Year of manufacture: 2013 Control type: CNC control Control system: Heidenhain 530 Warehouse location: Halberstadt Country of origin: Czech Republic X-axis travel: 3500 mm Y-axis travel: 2000 mm Z-axis travel: 1250 mm W-axis travel: 800 mm B-axis: 360° Table load capacity: 15,000 kg Tool holder: SK 50 Rotational speed: 1400 rpm Spindle speed: 2000 rpm Table size: 1800 x 2200 mm Additional information: - The machine control was retrofitted in 2013 to a HEIDENHAIN 530i. - All drives were upgraded to digital. The tower thrust bearing was also replaced in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module installed in the machine. - Spare parts packed as new, machine covers. - All bearings of the machine have been replaced in recent years. - Tools and face milling cutters are available. Single-owner machine. The machine is still powered on and in operation. Inspection is possible by arrangement.

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), Unit Kontrol Merek: HAAS Model: Sigma 5 Penggerak Utama Jumlah sumbu: 2 Podpjx H Uz Njfx An Iora HAAS TR160 dengan Sigma 5 ini diproduksi tahun 2016. Mesin ini memiliki meja 2-sumbu dan dilengkapi dengan motor servo Sigma 5, memastikan operasi yang presisi dan efisien. Cocok bagi yang ingin meningkatkan kemampuan permesinan mereka. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Peralatan Mesin Lainnya

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Pressing force: 320 t Sheet thickness: 0 mm Strokes per minute: 80 spm Total pressing force: 320 t Stroke: 30 - 80 mm Clamping area (lower table): 630 x 740 mm Clamping area (upper table): 630 x 630 mm Total power requirement: 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in as-new condition with new CE marking. MAIN RAM Total force (nominal): 320 t Minimum stroke: 30 mm Stroke: 80 mm V-RING Nominal force: 160 t Stroke: 30 mm COUNTER RAM Nominal force: 80 t Stroke: 30 mm TOOL DIMENSIONS Lower table - width: 630 mm Lower table - depth: 740 mm Upper table - width: 630 mm Upper table - depth: 630 mm Max. daylight: 320 mm Pjdpovwgl Njfx An Iora ELECTRICAL SPECIFICATIONS Total power consumption: 60 kW

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.600 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.000 mm, Pusat pemesinan vertikal Produsen: DMG Tipe: DMU 160 P duoBLOCK Tahun pembuatan: 2007 Kontrol: Heidenhain ITNC 530 Sumbu: 5-sumbu simultan Perjalanan sumbu Prodpfx Anezhufho Ija X: 1600 mm Y: 1250 mm Z: 1000 mm Magazin alat: 60 slot alat Kecepatan putar: 18.000 rpm - HSK 63 - Probe pengukur - Pengukur alat laser Blum - Tangki pendingin 980 liter - Pendingin internal 40 bar - Konveyor chip - Handwheel elektronik - Mode operasi 4 - Persiapan perangkat lunak 3-D Quickset - Kepala frais universal dengan sumbu A terkontrol Mesin dari institut kedirgantaraan. Kondisi sangat baik. Kesalahan dan penjualan antara dipertahankan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, 9490 Psdpeyz Stljfx An Ijra

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Podpfx Ajr A Hcben Iora Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Kondisi: bekas, Tahun pembuatan: 2003, Maximum turning diameter: 246 mm Turning length: 600 mm Control: 840 D Powerline Siemens Swing diameter over bed: 400 mm Swing diameter over cross slide: 300 mm Distance between centers: 600 mm Main spindle speed range: up to 6,000 rpm Main spindle drive power: 16 kW Maximum torque: 155 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 68.5 mm Spindle nose: 140H5 Prodpfxeypv Tqe An Isa Counter spindle speed range: up to 4,000 rpm Counter spindle drive power: 7.5 kW Maximum torque: 48 Nm Spindle diameter at front bearing: 75 mm Spindle bore: 37 mm Spindle nose: 140H5 Number of tool stations: 12 positions Number of driven tool stations: 12 positions Driven tool speed range: up to 5,000 rpm Driven tool drive power: 3.7 kW Maximum torque (driven tools): 24 Nm Tool holder: VDI 30 Tool shank: 20 x 20 mm X-axis: 160 mm Z-axis: 450 mm Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 rpm Maximum torque C: 155 Nm Total power requirement: 32 kVA Machine weight approx.: 3.8 t Space requirements approx.: 8.0 x 3.0 x 2.7 m CNC Turning and Milling Center GILDEMEISTER - CTX 320 linear V5 - Main and counter spindle - Driven tools - C axis - ShopTurn

Kondisi: bekas, Tahun pembuatan: 2003, Data Teknis: Diameter Putar: 680 mm Jarak antara senter: 1000 mm Predeyfnqgopfx An Isa Kecepatan putar: 2800 rpm Chuck: ø300 mm Dimensi (perkiraan): 5560 x 2400 x 2130 mm Berat (perkiraan): 10.000 kg Perlengkapan: - Kontrol: Heidenhain CNC Pilot 4290 - Revolver 12 posisi VDM 40 - Sumbu C

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, jam operasional: 39.945 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 580 mm, jarak gerak sumbu Z: 400 mm, produsen pengendali: Heidenhain iTNC 530, tinggi total: 2.900 mm, panjang total: 5.500 mm, lebar total: 2.650 mm, kecepatan spindel (min.): 28.000 rpm, pasokan pendingin: 40 batang, Year of manufacture: 2013 CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 450 Travel Y-axis mm: 580 Travel Z-axis mm: 400 C-axis indexing degrees: 360º (0.0001° increments) A-axis indexing degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Axis acceleration m/s²: 13 NC Milling/Turning Table: Number of pallets: System 3R (21 pallets type GPS 240, 30 pallets type GPS 120, and 24 pallets type ITS50) Pallet dimensions mm: base plate for root pallet Max. workpiece size (D x H) mm: for GPS 240 pallet (275 x 275 x 200 mm); for GPS 120 pallet (150 x 150 x 200 mm); for ITS50 pallet (ø70 x 200 mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Max. spindle speed rpm: 28,000 Spindle drive power kW: 35/25 (40% duty cycle/continuous) Cooling Coolant supply through spindle bar: 40 Tank capacity litres: 600 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 120 Psdsxv Av Rjpfx An Iera Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Infrared probing system Internal coolant supply Rotating safety windows Rinsing gun Selectable air blast through spindle via M function Laser tool measurement for tool length and diameter 3D quickSET Preparation for external pallet transfer High-precision package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine hours: Power-on hours: 62,983 Spindle working hours: 39,945 Total power requirement kVA: 55 Basic machine: Dimensions/Weight Length mm: 5,500 Width mm: 2,650 Height mm: 2,900 Weight kg: 9,500 + System 3R