Bubut tengah dan bubut spindel

Tacchi MT-BM330

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Kjdjt Hw Iiopfx Adkedl Machine weight approx. 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial no. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: baik (bekas), Tahun pembuatan: 1986, nomor mesin/kendaraan: 23036, 23380 Technical Data: Kdjdpfx Aorckw Isdkol - Drilling capacity in steel (ST 60): 30 mm - Spindle taper: MT 3 - 4 feeds: 0.1 / 0.16 / 0.25 / 0.4 mm/rev - Spindle speeds (geared stages): 95 – 2000 rpm - Spindle stroke: 160 mm - Throat depth: 350 mm - Table with 3 T-slots, height-adjustable: 340 x 320 mm - Table tiltable left & right - Max. distance table – spindle: 500 mm - Max. distance machine base – spindle: 1050 mm - Column diameter: 160 mm - Lighting - Drive: 400 V / 2.4 kW - Space requirement approx.: W 600 x H 1950 x D 800 mm - Weight approx.: 350 kg

Kondisi: bekas, Tahun pembuatan: 2003, cnc_werkzeugschleifmaschine_schneeberger_norma_cfg_en Kdsdexz R T Uopfx Adksl

Kondisi: bekas, Tahun pembuatan: 1974, Technical specifications: Swing diameter over bed: 500 mm Swing diameter over cross-slide: 300 mm Turning length: 2100 mm Distance between centers: 2000 mm Spindle bore: approx. Ø 60 mm Speed range: 35.5 - 1800 / 18 steps rpm Rapid traverse X-axis: carriage 4.2 m/min Tailstock quill taper: MT 5 Ksdpfxsu Ix Dce Adkedl Tailstock quill travel: 180 mm Control voltage: 220 V Machine weight approx.: 3.25 t Machine dimensions approx. LxWxH: 3.5 x 1.2 x 1.6 m Thread cutting possible, e.g., metric, module, and inch threads Rapid traverse on cross-slide Chuck guard 2x chip trays Accessories: (see comparable on photo) 2x steady rests (1x closed, 1x open) Face plate 3-jaw chuck Jaw sets Flange Centers Various gears

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 690 mm, lubang spindel: 150 mm, diameter pembubutan: 1.040 mm, diameter pembubutan di atas carriage atas: 690 mm, tinggi pusat: 500 mm, lebar di tengah: 2.000 mm, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 160 mm, jarak gerak sumbu Z: 380 mm, saluran batang: 55 mm, Centre height: 500 mm Distance between centres: 2,000 mm Maximum turning diameter On cross-slide: 690 mm Over bed: 1,040 mm In natural gap: 1,070 mm Bed width (hardened guideways): 670 mm Gap length: 480 mm Gap length in front of platform: 320 mm CARRIAGE Bed guide length: 1,020 mm Cross-slide travel: 640 mm Top-slide travel: 360 mm SPINDLE Spindle nose: ASA 15’’ Spindle bore diameter: 150 mm Front bearing size NN: 200/310/82 mm Rear bearing size NNU: 190/260/69 mm Internal Morse taper in reduction sleeve: No. 6 Number of spindle speeds: 24 Speed range: 4 – 800 rpm THREAD CUTTING Total threads: 398 Metric threads: 0.5 – 224 mm Module threads: 0.25 – 11 mod. Whitworth threads: 56 – 1/8 TPI DP (Diametral Pitch) threads: 112 – 1/4 DP FEEDS Number: 108 Longitudinal, cross, and top-slide: 0.05 – 22.4 mm/rev Kdedpfx Adsyhhuwoksl RAPID TRAVERSE Longitudinal, cross and top-slide: 2,500 mm/min Longitudinal return: 5,000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Bed steady rest capacity: 140 – 500 mm Carriage steady rest capacity: 40 – 350 mm PERMISSIBLE LOAD Overhang: approx. 1,500 kg Between centres, without steady rest: approx. 5,000 kg Between centres, with steady rest: approx. 6,000 kg Machine weight: approx. 7,800 kg

Tahun pembuatan: 2024, Kondisi: baru, New mechanical and electromagnetic clutches and brakes for Bulgarian machine tools of the following types: CU400, CU500, CU502, CU580M, CU582, C11MT, C11MB, C11, C13B… We also offer a wide range of various spare parts for the above-mentioned machine tools, most of which are available from stock, while for the rest we offer the shortest possible delivery times. We warmly invite you to cooperate with us! Ksdpfjv Rpn Tox Adkedl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Expanding Mandrel Decoiler Type: AE-050 Strip Width: 400 - 1,500 mm Strip Thickness: 0.5 - 3 mm Coil Weight: 20 t Coil OD (Outer Diameter): max. 1,800 mm Mandrel OD: 508 mm Year of Manufacture: 2009 Ksdpfjupg Scex Adksdl

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: Pressing force: 160 t Throat depth: 360 mm Ram stroke – max.: 500 mm Distance table to ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4x Ø 62 mm Ram advance speed: 200 mm/s Ram return speed: 125 mm/s Ram surface: 450 x 850 mm Pin hole in ram: Ø 49 mm Height above floor: 810 mm Total connected load: 17 kW Machine weight approx.: 7,200 kg Machine dimensions (LxWxH) approx.: 2.1 x 1.4 x 3.4 m Manual counter In stock Kdodpfxsu Nfvuj Adkol

Kondisi: sangat baik (bekas), Tahun pembuatan: 1980, Bandwidth: 1,500 mm Ksdpfx Adsqw Akmekedl Strip thickness: 0.6 - 3 mm Coil weight: 10 t

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, daya motor spindle: 45.000 W, tinggi total: 2.120 mm, berat keseluruhan: 11.500 kg, produsen pengendali: SIEMENS, model controller: 810 D, panjang produk (maks.): 5.400 mm, jumlah sumbu: 2, This Weiler E120x3000 was manufactured in 2001. It features a center distance of 3000 mm, a center height of 600 mm, and a swing diameter over bed of 1200 mm. The spindle bore is 165 mm, and it is equipped with a robust main drive rated at 45/37 kW. This machine is ideally suited for heavy-duty turning work and comes with accessories such as a chuck, a faceplate, and a steady rest. Contact us for further information about this machine. • Working area: • Distance between centers: 3000 mm • Center height: 600 mm • Swing diameter over bed: 1200 mm • Swing diameter over cross slide: 830 mm • Cross slide travel: 590 mm • Bed carriage guide length: 860 mm • Turning tool cross-section (H x W): 40 x 40 mm • Tool holder: Parat size 4 • Spindle: • Spindle nose DIN 55027 / 55026, size 15 • Spindle bore: 165 mm • Main spindle taper: metric 171 • Main drive: • Drive power (60% / 100% duty cycle): 45 / 37 kW • Max. spindle torque: 8000 Nm • Speed range gearbox stage 1: 1-280 rpm • Speed range gearbox stage 2: 4-900 rpm • Tailstock: • Quill diameter: 140 mm • Quill stroke: 300 mm • Quill taper: MK 6 • Dimensions and weight of the machine: • Overall length: 5400 mm (without chip conveyor), 6535 mm (with chip conveyor) • Overall width: 2600 mm • Overall height: 2120 mm • Machine weight: 11,500 kg • Overhaul Work Performed: • Hardening and grinding of all bedways • Grinding of tailstock ways • Overhaul of the complete bed and cross slide assembly (grinding/scraping of all guides) • Renewal of bed carriage slideways • Renewal or shimming of keyways and ground guides • Replacement of all wipers • Replacement of all belts • Overhaul of the main spindle assembly in the headstock • Renewal of the X-axis including bearings • Renewal of the Z-axis including bearings • Overhaul of the tailstock quill (regrinding MK 6 taper), replacement of spindle and nut • Adjustment of the tool system • Replacement of the main spindle motor • Inspection of auxiliary motors (X and Z axis) • Refurbishment of existing safety guards (sliding hood/chuck guard) • Replacement of all rotary, cam, and limit switches • Replacement of spindle and handwheel encoders • Renewal of flexible cables and coolant hoses in the working area • Replacement of centralized lubrication system Kodpfx Aox D Hz Tedksdl • Renewal of energy chains • Painting as specified (standard structural basalt and light gray) • Assembly and geometric inspection of the machine according to DIN 8605 Additional Equipment • 1x used 630 mm diameter chuck with various jaws • 1x used 1100 mm diameter faceplate • 1x used steady rest, max. 300 mm diameter • 1x used chip conveyor